Directive 2014/32/EU of the European Parliament and of the CouncilShow full title

Article 4 U.K. Definitions

For the purposes of this Directive, the following definitions shall apply:

(1)

‘measuring instrument’ means any device or system with a measurement function that is covered by Article 2(1);

(2)

‘sub-assembly’ means a hardware device, mentioned as such in the instrument-specific annexes, that functions independently and makes up a measuring instrument together with other sub-assemblies with which it is compatible, or with a measuring instrument with which it is compatible;

(3)

‘legal metrological control’ means the control of the measurement tasks intended for the field of application of a measuring instrument, for reasons of public interest, public health, public safety, public order, protection of the environment, levying of taxes and duties, protection of the consumers and fair trading;

(4)

‘normative document’ means a document containing technical specifications adopted by the International Organisation of Legal Metrology;

(5)

‘making available on the market’ means any supply of a measuring instrument for distribution or use on the Union market in the course of a commercial activity, whether in return for payment or free of charge;

(6)

‘placing on the market’ means the first making available of a measuring instrument on the Union market;

(7)

‘putting into use’ means the first use of a measuring instrument intended for the end-user for the purposes for which it was intended;

(8)

‘manufacturer’ means any natural or legal person who manufactures a measuring instrument or has a measuring instrument designed or manufactured, and markets that measuring instrument under his name or trade mark or puts it into use for his own purposes;

(9)

‘authorised representative’ means any natural or legal person established within the Union who has received a written mandate from a manufacturer to act on his behalf in relation to specified tasks;

(10)

‘importer’ means any natural or legal person established within the Union who places a measuring instrument from a third country on the Union market;

(11)

‘distributor’ means any natural or legal person in the supply chain, other than the manufacturer or the importer, who makes a measuring instrument available on the market;

(12)

‘economic operators’ means the manufacturer, the authorised representative, the importer and the distributor;

(13)

‘technical specification’ means a document that prescribes technical requirements to be fulfilled by a measuring instrument;

(14)

‘harmonised standard’ means harmonised standard as defined in point (c) of point 1 of Article 2 of Regulation (EU) No 1025/2012;

(15)

‘accreditation’ means accreditation as defined in point 10 of Article 2 of Regulation (EC) no 765/2008;

(16)

‘national accreditation body’ means national accreditation body as defined in point 11 of Article 2 of Regulation (EC) no 765/2008;

(17)

‘conformity assessment’ means the process demonstrating whether the essential requirements of this Directive relating to a measuring instrument have been fulfilled;

(18)

‘conformity assessment body’ means a body that performs conformity assessment activities including calibration, testing, certification and inspection;

(19)

‘recall’ means any measure aimed at achieving the return of a measuring instrument that has already been made available to the end-user;

(20)

‘withdrawal’ means any measure aimed at preventing a measuring instrument in the supply chain from being made available on the market;

(21)

‘Union harmonisation legislation’ means any Union legislation harmonising the conditions for the marketing of products;

(22)

‘CE marking’ means a marking by which the manufacturer indicates that the measuring instrument is in conformity with the applicable requirements set out in Union harmonisation legislation providing for its affixing.