Directive 2014/29/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of simple pressure vessels (recast) (Text with EEA relevance) (c. 29)

ANNEX II U.K. CONFORMITY ASSESSMENT PROCEDURES

4. Conformity to type based on internal production control (Module C) U.K.

4.1. Conformity to type based on internal production control is the part of a conformity assessment procedure whereby the manufacturer fulfils the obligations laid down in points 4.2 and 4.3, and ensures and declares that the vessels concerned are in conformity with the type described in the EU-type examination certificate and satisfy the requirements of this Directive that apply to them. U.K.

4.2. Manufacturing U.K.

The manufacturer shall take all measures necessary so that the manufacturing process and its monitoring ensure conformity of the manufactured vessels with the approved type described in the EU-type examination certificate and with the requirements of this Directive that apply to them.

Before commencing manufacture, the manufacturer shall provide the notified body which issued the EU-type examination certificate with all necessary information, and in particular:

(a)

the certificates relating to the suitable qualification of the welding operations and of the welders or welding operators;

(b)

the inspection slip for the materials used in the manufacture of parts and components contributing to the strength of the vessel;

(c)

a report on the examinations and tests performed;

(d)

a document describing the manufacturing processes and all of the predetermined systematic measures taken to ensure conformity of the vessels with the type described in the EU-type examination certificate.

That document shall include:

(i)

a description of the means of manufacture and checking appropriate to the construction of the vessels;

(ii)

an inspection document describing the appropriate examinations and tests to be carried out during manufacture, together with the procedures in respect thereof and the frequency with which they are to be performed;

(iii)

an undertaking to carry out the examinations and tests in accordance with the inspection document and to have a hydrostatic test or, subject to the agreement of the Member State, a pneumatic test carried out on each vessel manufactured at a test pressure equal to 1,5 times the design pressure; those examinations and tests shall be carried out under the responsibility of qualified staff who are independent from production personnel, and shall be the subject of a report;

(iv)

the addresses of the places of manufacture and storage and the date on which manufacture is to commence.

The notified body shall, before the date on which any manufacture begins, examine those documents in order to certify their conformity with the EU-type examination certificate.

4.3. CE marking and EU declaration of conformity U.K.

4.3.1. The manufacturer shall affix the CE marking to each individual vessel that is in conformity with the type described in the EU-type examination certificate and satisfies the applicable requirements of this Directive. U.K.

4.3.2. The manufacturer shall draw up a written EU declaration of conformity for each vessel model and keep it at the disposal of the national authorities for 10 years after the vessel has been placed on the market. The EU declaration of conformity shall identify the vessel model for which it has been drawn up. U.K.

4.3.3. A copy of the EU declaration of conformity shall be made available to the relevant authorities upon request. U.K.

4.4. Authorised representative U.K.

The manufacturer’s obligations set out in point 4.3 may be fulfilled by his authorised representative, on his behalf and under his responsibility, provided that they are specified in the mandate.