Commission Directive 2011/63/EU of 1 June 2011 amending, for the purpose of its adaptation to technical progress, Directive 98/70/EC of the European Parliament and of the Council relating to the quality of petrol and diesel fuels

Article 1U.K.

Directive 98/70/EC is amended as follows:

(1)

Annex I is amended as follows:

(a)

footnote 1 is replaced by the following:

‘(¹)Test methods shall be those specified in EN 228:2008. Member States may adopt the analytical method specified in replacement EN 228:2008 standard if it can be shown to give at least the same accuracy and at least the same level of precision as the analytical method it replaces.’;

(b)

footnote 6 is replaced by the following:

‘(⁶)Other mono-alcohols and ethers with a final boiling point no higher than that stated in EN 228:2008.’;

(2)

in Annex II, footnote 1 is replaced by the following:

‘(¹)Test methods shall be those specified in EN 590:2009. Member States may adopt the analytical method specified in replacement EN 590:2009 standard if it can be shown to give at least the same accuracy and at least the same level of precision as the analytical method it replaces.’;

(3)

Annex III is replaced by the text set out in the Annex to this Directive.

Commission Directive 2011/63/EUShow full title

Article 1U.K.

‘(1)Test methods shall be those specified in EN 228:2008. Member States may adopt the analytical method specified in replacement EN 228:2008 standard if it can be shown to give at least the same accuracy and at least the same level of precision as the analytical method it replaces.’;

‘(6)Other mono-alcohols and ethers with a final boiling point no higher than that stated in EN 228:2008.’;

‘(1)Test methods shall be those specified in EN 590:2009. Member States may adopt the analytical method specified in replacement EN 590:2009 standard if it can be shown to give at least the same accuracy and at least the same level of precision as the analytical method it replaces.’;

‘(¹)Test methods shall be those specified in EN 228:2008. Member States may adopt the analytical method specified in replacement EN 228:2008 standard if it can be shown to give at least the same accuracy and at least the same level of precision as the analytical method it replaces.’;

‘(⁶)Other mono-alcohols and ethers with a final boiling point no higher than that stated in EN 228:2008.’;

‘(¹)Test methods shall be those specified in EN 590:2009. Member States may adopt the analytical method specified in replacement EN 590:2009 standard if it can be shown to give at least the same accuracy and at least the same level of precision as the analytical method it replaces.’;