Directive 2009/105/EC of the European Parliament and of the Council of 16 September 2009 relating to simple pressure vessels (codified version) (Text with EEA relevance) (repealed) (c. 105)

ANNEX II ‘CE’ MARKING, INSCRIPTIONS, INSTRUCTIONS, DESIGN AND MANUFACTURE SCHEDULES, DEFINITIONS AND SYMBOLS

1. ‘CE’ MARKING AND INSCRIPTIONS

1.1. ‘CE’ marking

The ‘CE’ marking shall consist of the initials ‘CE’ in the following form:

If the ‘CE’ marking is reduced or enlarged the proportions given in the graduated drawing set out in this point must be respected.

The various components of the ‘CE’ marking must have substantially the same vertical dimension, which may not be less than 5 mm.

1.2. Inscriptions

The vessel or data plate must bear at least the following information:

(a)

the maximum working pressure (PS in bar);

(b)

the maximum working temperature (T_max in °C);

(c)

the minimum working temperature (T_min in °C);

(d)

the capacity of the vessel (V in l);

(e)

the name or mark of the manufacturer;

(f)

the type and serial or batch identification of the vessel;

(g)

the last two digits of the year in which the ‘CE’ marking was affixed.

Where the data plate is used, it must be so designed that it cannot be reused and must include a vacant space to enable other information to be provided.