Textual Amendments
F1 Substituted by Commission Regulation (EU) No 371/2010 of 16 April 2010 replacing Annexes V, X, XV and XVI to Directive 2007/46/EC of the European Parliament and of the Council establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive) (Text with EEA relevance).
Regulatory act reference | Annex and paragraph | Specific conditions | |
---|---|---|---|
3. | Directive 70/221/EEC | Annex II (Rear underrun protection) Point 5.4.5. | |
6. | Directive 70/387/EEC | Annex II Point 4.3. | |
8. | Directive 2003/97/EC | Annex III All provisions in Sections 3, 4 and 5. | Prescribed fields of vision of rear-view mirrors. |
12. | Directive 74/60/EEC | Annex I All provisions in Section 5 (Specifications). | Measurement of all radii of curvature and of all projections except for those requirements where a force has to be applied in order to check compliance with the provisions. |
Annex II | Determination of the head-impact zone. | ||
16. | Directive 74/483/EEC | Annex I All provisions in Section 5 (General specifications) and Section 6 (Particular specifications). | Measurement of all radii of curvature and of all projections except for those requirements where a force has to be applied in order to check compliance with the provisions. |
20. | Directive 76/756/EEC | Section 6 (Individual specifications) of UNECE Regulation No 48. | The test drive provided for in Point 6.22.9.2.2 shall be performed on a real vehicle. |
Provisions of Annexes 4, 5 and 6 to UNECE Regulation No 48. | |||
27. | Directive 77/389/EEC | Annex II, Section 2 | |
32. | Directive 77/649/EEC | Section 5 (Specifications) of Annex I. | |
35. | Directive 78/318/EEC | Annex I | Point 5.1.2. Measurement of the swept area only. |
37. | Directive 78/549/EEC | Section 2 (Special requirements) of Annex I | |
42. | Directive 89/297/EEC | Annex I Point 2.8. | Resistance under a horizontal force and deflection measurement. |
49. | Directive 92/114/EEC | Annex I All provisions in Section 4 (Specific requirements). Regarding N 1 vehicles, the provisions referred to in item 16 of this Appendix shall apply. | Measurement of all radii of curvature and of all projections except for those requirements where a force has to be applied in order to check compliance with the provisions. |
50. | Directive 94/20/EC | Annex V ‘ Requirements for mechanical coupling Devices ’ | All provisions of Sections 1 to 8 included. |
Annex VI Point 1.1. | Strength tests on mechanicals couplings of simple design may be replaced by virtual tests. | ||
Section 4 of Annex VI ‘ Testing of mechanical coupling devices ’ | Points 4.5.1. (Strength test), 4.5.2. (Resistance to buckling) and 4.5.3. (Resistance to bending moment) only. | ||
52. | Directive 2001/85/EC | Annex I | Point 7.4.5. Stability test under the conditions specified in the Appendix to Annex I. |
Annex IV Strength of superstructure | Appendix 4 — Verification of strength of the superstructure by calculation. | ||
57. | Directive 2000/40/EC | Section 3 of Annex 5 to UNECE Regulation 93. | Resistance under a horizontal force and deflection measurement.] |