Directive 2007/46/EC of the European Parliament and of the Council of 5 September 2007 establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive) (Text with EEA relevance) (repealed) (c. 46)

Please note that the date you requested in the address for this web page is not an actual date upon which a change occurred to this item of legislation. You are being shown the legislation from , which is the first date before then upon which a change was made.

[F1 ANNEX IX U.K. EC CERTIFICATE OF CONFORMITY

Textual Amendments

F1 Substituted by Commission Regulation (EU) 2017/1151 of 1 June 2017 supplementing Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information, amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) No 1230/2012 and repealing Commission Regulation (EC) No 692/2008 (Text with EEA relevance).

PART I U.K. COMPLETE AND COMPLETED VEHICLES

SIDE 2 U.K.

VEHICLE CATEGORY N2 (complete and completed vehicles) U.K.

Side 2 U.K.

Masses U.K.

13. Mass in running order: … kg U.K.

13.1. Distribution of this mass amongst the axles: U.K.

1.

… kg

2.

… kg

3.

… kg

13.2. Actual mass of the vehicle: … kg U.K.

16. Technically permissible maximum masses U.K.

16.1. Technically permissible maximum laden mass: … kg U.K.

16.2. Technically permissible mass on each axle: U.K.

1.

… kg

2.

… kg

3.

… kg etc.

16.3. Technically permissible mass on each axle group: U.K.

1.

… kg

2.

… kg

3.

… kg etc.

16.4. Technically permissible maximum mass of the combination: … kg U.K.

17. Intended registration/in service maximum permissible masses in national/international traffic (1) (2) U.K.

17.1. Intended registration/in service maximum permissible laden mass: … kg U.K.

17.2. Intended registration/in service maximum permissible laden mass on each axle: U.K.

1.

… kg

2.

… kg

3.

… kg

17.3. Intended registration/in service maximum permissible laden mass on each axle group: U.K.

1.

… kg

2.

… kg

3.

… kg

17.4. Intended registration/in service maximum permissible mass of the combination: … kg U.K.

18. Technically permissible maximum towable mass in case of: U.K.

18.1. Drawbar trailer: … kg U.K.

18.2. Semi-trailer: … kg U.K.

18.3. Centre-axle trailer: … kg U.K.

18.4. Unbraked trailer: … kg U.K.

19. Technically permissible maximum static mass at the coupling point: … kg] U.K.

(1)

[F1 Delete where not applicable

(2)

The manufacturer may complete these entries either for international traffic or national traffic or both.

For national traffic, the code of the country where the vehicle is intended to be registered shall be mentioned. The code shall be in accordance with standard ISO 3166-1:2006.

For international traffic, the directive number shall be referred to (e.g. ‘ 96/53/EC ’ for Council Directive 96/53/EC).]

Textual Amendments

F1 Substituted by Commission Regulation (EU) 2017/1151 of 1 June 2017 supplementing Regulation (EC) No 715/2007 of the European Parliament and of the Council on type-approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information, amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) No 1230/2012 and repealing Commission Regulation (EC) No 692/2008 (Text with EEA relevance).