xmlns:atom="http://www.w3.org/2005/Atom" xmlns:atom="http://www.w3.org/2005/Atom"

[F1ANNEX III U.K. INFORMATION DOCUMENT FOR THE PURPOSE OF EC TYPE-APPROVAL OF VEHICLES (For explanatory notes, please refer to last page of Annex I)

PART I U.K.

B. Category O U.K.

[F22. MASSES AND DIMENSIONS ( f )( g )( 7 ) U.K.

(in kg and mm) (Refer to drawing where applicable)]

2.1. Wheelbase(s) (fully loaded) ( g1 ): U.K.
2.1.1. Two-axle vehicles: … U.K.
2.1.2. Vehicles with three or more axles U.K.
2.1.2.1. Axle spacing between consecutive axles going from the foremost to the rearmost axle: … U.K.
2.1.2.2. Total axle spacing: … U.K.
2.3.1. Track of each steered axle ( g4 ): … U.K.
2.3.2. Track of all other axles ( g4 ): … U.K.
2.4. Range of vehicle dimensions (overall) U.K.
2.4.1. For chassis without bodywork U.K.
2.4.1.1. Length ( g5 ): … U.K.
2.4.1.1.1. Maximum permissible length: … U.K.
2.4.1.1.2. Minimum permissible length: … U.K.
2.4.1.1.3. In the case of trailers, maximum permissible drawbar length ( g6 ): … U.K.
2.4.1.2. Width ( g7 ): … U.K.
2.4.1.2.1. Maximum permissible width: … U.K.
2.4.1.2.2. Minimum permissible width: … U.K.
2.4.2. For chassis with bodywork U.K.
2.4.2.1. Length ( g5 ): … U.K.
2.4.2.1.1. Length of the loading area: … U.K.
2.4.2.1.2. In the case of trailers, maximum permissible drawbar length ( g6 ): … U.K.
2.4.2.2. Width ( g7 ): … U.K.
2.4.2.2.1. Thickness of the walls (in the case of vehicles designed for controlled-temperature transport of goods): … U.K.
2.4.2.3. Height (in running order) ( g8 ) (for suspension adjustable for height, indicate normal running position): … U.K.
[F22.6. Mass in running order ( h ) U.K.
(a)

minimum and maximum for each variant: …

(b)

mass of each version (a matrix must be provided): …

2.6.1. Distribution of this mass among the axles and, in the case of a semi-trailer a rigid drawbar trailer or a centre-axle trailer, the mass on the coupling: … U.K.
(a)

minimum and maximum for each variant: …

(b)

mass of each version (a matrix must be provided): …]

[F32.6.2. Mass of the optional equipment (as defined in point (5) of Article 2 of Regulation (EU) No 1230/2012: …] U.K.
2.7. Minimum mass of the completed vehicle as stated by the manufacturer, in the case of an incomplete vehicle: … U.K.
2.8. Technically permissible maximum laden mass stated by the manufacturer ( i )( 3 ): … U.K.
2.8.1. Distribution of this mass among the axles, and in the case of a semi-trailer or centre-axle trailer, load on the coupling point ( 3 ): … U.K.
2.9. Technically permissible maximum mass on each axle : … U.K.
[F22.10. Technically permissible mass on each group of axles: ] U.K.
[F22.12. Technically permissible maximum mass at the coupling point: U.K.
2.12.2. Of a semi-trailer, a centre-axle trailer or a rigid drawbar trailer: …] U.K.
[F22.16. Registration/in service maximum permissible masses (optional) U.K.
2.16.1. Registration/in service maximum permissible laden mass: … U.K.
2.16.2. Registration/in service maximum permissible mass on each axle and, in the case of a semi-trailer or centre-axle trailer, intended load on the coupling point stated by the manufacturer if lower than the technically permissible maximum mass on the coupling point: … U.K.
2.16.3. Registration/in service maximum permissible mass on each group of axles: …] U.K.
2.16.4. Intended registration/in service maximum permissible towable mass (several entries possible for each technical configuration ( 5 )): …] U.K.
F42.16.5.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .U.K.