F1ANNEX ICOMPLETE LIST OF INFORMATION FOR THE PURPOSE OF EC TYPE-APPROVAL OF VEHICLES14
9.BODYWORK
9.10.Interior arrangement
9.10.5.Heating systems for the passenger compartment
9.10.5.1.
A brief description of the vehicle type with regard to the heating system if the heating system uses the heat of the engine cooling fluid: …
9.10.5.2.
A detailed description of the vehicle type with regard to the heating if the cooling air or the exhaust gases of the engine are used as heat source, including:
9.10.5.2.1.
Layout drawing of the heating system showing its position in the vehicle: …
9.10.5.2.2.
Layout drawing of the heat exchanger for heating systems using the exhaust gases for heating, or of the parts where the heat exchange takes place (for heating systems using the engine cooling air for heating): …
9.10.5.2.3.
Sectional drawing of the heat exchanger or the parts respectively where the heat exchange takes place indicating the thickness of the wall, used materials and characteristics of the surface: …
9.10.5.2.4.
Specifications shall be given for further important components of the heating system such as, for example, the heater fan, with regard to their method of construction and technical data: …
9.10.5.3.
A brief description of the vehicle type with regard to the combustion heating system and the automatic control: …
9.10.5.3.1.
Layout drawing of the combustion heater, the air inlet system, the exhaust system, the fuel tank, the fuel supply system (including the valves) and the electrical connections showing their positions in the vehicle.
9.10.5.4.
Maximum electrical consumption: …… kW
Substituted by Commission Regulation (EC) No 1060/2008 of 7 October 2008 replacing Annexes I, III, IV, VI, VII, XI and XV to Directive 2007/46/EC of the European Parliament and of the Council establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive) (Text with EEA relevance).