ANNEX IComplete list of information for the purpose of EC type-approval of vehicles
3.POWER PLANT (q) (In the case of a vehicle that can run either on petrol, diesel, etc., or also in combination with another fuel, items shall be repeated (+))
3.2.
3.2.4.
3.2.4.2.
By fuel injection (compression ignition only): yes/no (1)
3.2.4.2.1.
System description:
3.2.4.2.2.
Working principle: direct injection/pre-chamber/swirl chamber (1)
3.2.4.2.3.
Injection pump
3.2.4.2.3.1.
Make(s):
3.2.4.2.3.2.
Type(s):
3.2.4.2.3.3.
Maximum fuel delivery (1) (2): … mm3/stroke or cycle at a pump speed of: … min–1 or, alternatively, a characteristic diagram:
3.2.4.2.3.4.
Injection timing (2):
3.2.4.2.3.5.
Injection advance curve (2):
3.2.4.2.3.6.
Calibration procedure: test bench/engine (1)
3.2.4.2.4.
Governor
3.2.4.2.4.1.
Type:
3.2.4.2.4.2.
Cut-off point
3.2.4.2.4.2.1.
Cut-off point under load: … min–1
3.2.4.2.4.2.2.
Cut-off point without load: … min–1
3.2.4.2.5.
Injection piping
3.2.4.2.5.1.
Length: … mm
3.2.4.2.5.2.
Internal diameter: … mm
3.2.4.2.6.
Injector(s)
3.2.4.2.6.1.
Make(s):
3.2.4.2.6.2.
Type(s):
3.2.4.2.6.3.
Opening pressure (2): … kPa or characteristic diagram (2):
3.2.4.2.7.
Cold start system
3.2.4.2.7.1.
Make(s):
3.2.4.2.7.2.
Type(s):
3.2.4.2.7.3.
Description:
3.2.4.2.8.
Auxiliary starting aid
3.2.4.2.8.1.
Make(s):
3.2.4.2.8.2.
Type(s):
3.2.4.2.8.3.
System description:
3.2.4.2.9.
Electronic control unit
3.2.4.2.9.1.
Make(s):
3.2.4.2.9.2.
Description of the system: