Directive 2007/46/EC of the European Parliament and of the Council of 5 September 2007 establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive) (Text with EEA relevance) (repealed) (c. 46)

[F1 ANNEX I U.K. COMPLETE LIST OF INFORMATION FOR THE PURPOSE OF EC TYPE-APPROVAL OF VEHICLES (1)

Textual Amendments

F1 Substituted by Commission Regulation (EC) No 1060/2008 of 7 October 2008 replacing Annexes I, III, IV, VI, VII, XI and XV to Directive 2007/46/EC of the European Parliament and of the Council establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive) (Text with EEA relevance).

3. POWER PLANT (3) U.K.

3.2. Internal combustion engine U.K.

3.2.17. Specific information related to gas fuelled engines for heavy-duty vehicles (in the case of systems laid out in a different manner, supply equivalent information) U.K.

3.2.17.1. Fuel: LPG/NG-H/NG-L/NG-HL (2) U.K.

3.2.17.2. Pressure regulator(s) or vaporiser/pressure regulator(s) (2) U.K.

3.2.17.2.1. Make(s): … U.K.

3.2.17.2.2. Type(s): … U.K.

3.2.17.2.3. Number of pressure reduction stages: … U.K.

3.2.17.2.4. Pressure in final stage U.K.

minimum: ….. kPa — maximum: …. kPa

3.2.17.2.5. Number of main adjustment points: … U.K.

3.2.17.2.6. Number of idle adjustment points: … U.K.

3.2.17.2.7. Type-approval number: … U.K.

3.2.17.3. Fuelling system: mixing unit/gas injection/liquid injection/direct injection (2) U.K.

3.2.17.3.1. Mixture strength regulation: … U.K.

3.2.17.3.2. System description and/or diagram and drawings: … U.K.

3.2.17.3.3. Type-approval number: … U.K.

3.2.17.4. Mixing unit U.K.

3.2.17.4.1. Number: … U.K.

3.2.17.4.2. Make(s): … U.K.

3.2.17.4.3. Type(s): … U.K.

3.2.17.4.4. Location: … U.K.

3.2.17.4.5. Adjustment possibilities: … U.K.

3.2.17.4.6. Type-approval number: … U.K.

3.2.17.5. Inlet manifold injection U.K.

3.2.17.5.1. Injection: single point/multipoint (2) U.K.

3.2.17.5.2. Injection: continuous/simultaneously timed/sequentially timed (2) U.K.

3.2.17.5.3. Injection equipment U.K.

3.2.17.5.3.1. Make(s): … U.K.

3.2.17.5.3.2. Type(s): … U.K.

3.2.17.5.3.3. Adjustment possibilities: … U.K.

3.2.17.5.3.4. Type-approval number: … U.K.

3.2.17.5.4. Supply pump (if applicable) U.K.

3.2.17.5.4.1. Make(s): … U.K.

3.2.17.5.4.2. Type(s): … U.K.

3.2.17.5.4.3. Type-approval number: … U.K.

3.2.17.5.5. Injector(s) … U.K.

3.2.17.5.5.1. Make(s): … U.K.

3.2.17.5.5.2. Type(s): … U.K.

3.2.17.5.5.3. Type-approval number: … U.K.

3.2.17.6. Direct injection U.K.

3.2.17.6.1. Injection pump/pressure regulator (2) U.K.

3.2.17.6.1.1. Make(s): … U.K.

3.2.17.6.1.2. Type(s): … U.K.

3.2.17.6.1.3. Injection timing: … U.K.

3.2.17.6.1.4. Type-approval number: … U.K.

3.2.17.6.2. Injector(s) … U.K.

3.2.17.6.2.1. Make(s): … U.K.

3.2.17.6.2.2. Type(s): … U.K.

3.2.17.6.2.3. Opening pressure or characteristic diagram (4) : … U.K.

3.2.17.6.2.4. Type-approval number: … U.K.

3.2.17.7. Electronic control unit (ECU) U.K.

3.2.17.7.1. Make(s): … U.K.

3.2.17.7.2. Type(s): … U.K.

3.2.17.7.3. Adjustment possibilities: … U.K.

3.2.17.7.4. Software calibration number(s): … U.K.

3.2.17.8. NG fuel-specific equipment U.K.

3.2.17.8.1. Variant 1 (only in the case of approvals of engines for several specific fuel compositions) U.K.

3.2.17.8.1.1. Fuel composition: U.K.

methane (CH 4 ):	basis: ……. % mole	min. …. % mole	max. ….. % mole
ethane (C 2 H 6 ):	basis: ……. % mole	min. …. % mole	max. ….. % mole
propane (C 3 H 8 ):	basis: ……. % mole	min. …. % mole	max. ….. % mole
butane (C 4 H 10 ):	basis: ……. % mole	min. …. % mole	max. ….. % mole
C 5 /C 5 +:	basis: ……. % mole	min. …. % mole	max. ….. % mole
oxygen (O 2 ):	basis: ……. % mole	min. …. % mole	max. ….. % mole
inert (N 2 , He, etc.):	basis: ……. % mole	min. …. % mole	max. ….. % mole

3.2.17.8.1.2. Injector(s) U.K.

3.2.17.8.1.2.1. Make(s): … U.K.

3.2.17.8.1.2.2 Type(s): … U.K.

3.2.17.8.1.3. Others (if applicable): … U.K.

3.2.17.8.2. Variant 2 (only in the case of approvals for several specific fuel compositions)] U.K.

(1)

[F1 If a part has been type-approved, that part need not be described if reference is made to such approval. Similarly, a part need not be described if its construction is clearly apparent from the attached diagrams or drawings. For each item for which drawings or photographs shall be attached, give numbers of the corresponding attached documents.

(2)

Delete where not applicable (there are cases where nothing needs to be deleted when more than one entry is applicable).

(3)

In the case of a vehicle that can run either on petrol, diesel, etc., or also in combination with another fuel, items shall be repeated.

In the case of non-conventional engines and systems, particulars equivalent to those referred to here shall be supplied by the manufacturer.

(4)

Specify the tolerance.]

Textual Amendments

F1 Substituted by Commission Regulation (EC) No 1060/2008 of 7 October 2008 replacing Annexes I, III, IV, VI, VII, XI and XV to Directive 2007/46/EC of the European Parliament and of the Council establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive) (Text with EEA relevance).