ANNEX II
“Appendix 1Information Document No … relating to EC type-approval as separate technical unit of exhaust systems for motor vehicles (Directive 70/157/EEC, as last amended by Directive …/…/EC)
The following information, if applicable, must be supplied in triplicate and include a list of contents. Any drawings must be supplied in appropriate scale and in sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, must show sufficient detail.
If the systems, components or separate technical units have electronic controls, information concerning their performance must be supplied.
0.General
0.1.Make (trade name of manufacturer):
0.2.Type and general commercial description(s):
0.5.Name and address of manufacturer:
0.7.In the case of components and separate technical units, location and method of affixing of the EC approval mark:
0.8.Address(es) of assembly plant(s):
1.Description of the vehicle for which the device is intended (if the device is intended to be fitted to more than one vehicle type the information requested under this point shall be supplied for each type concerned)
1.1.Make (trade name of manufacturer):
1.2.Type and general commercial description(s):
1.3.Means of identification of type, if marked on the vehicle:
1.4.Category of vehicle:
1.5.EC type-approval number with regard to sound level:
1.6.All the information mentioned in items 1.1 to 1.5 of the type-approval certificate concerning the vehicle (Annex I, Appendix 2 to this Directive):
2.Description of the device
2.1.A description of the replacement exhaust system indicating the relative position of each system component, together with mounting instructions:
2.2.Detailed drawings of each component, so that they can be easily located and identified, and reference to the materials used. These drawings must indicate the place provided for the compulsory affixing of the EC type-approval mark:
Date, File”