- Latest available (Revised)
- Original (As adopted by EU)
Directive 2006/21/EC of the European Parliament and of the Council of 15 March 2006 on the management of waste from extractive industries and amending Directive 2004/35/EC
When the UK left the EU, legislation.gov.uk published EU legislation that had been published by the EU up to IP completion day (31 December 2020 11.00 p.m.). On legislation.gov.uk, these items of legislation are kept up-to-date with any amendments made by the UK since then.
Legislation.gov.uk publishes the UK version. EUR-Lex publishes the EU version. The EU Exit Web Archive holds a snapshot of EUR-Lex’s version from IP completion day (31 December 2020 11.00 p.m.).
EU Directives are published on this site to aid cross referencing from UK legislation. Since IP completion day (31 December 2020 11.00 p.m.) no amendments have been applied to this version.
1.The competent authority shall satisfy itself that the operator has taken the necessary measures in order to meet Community environmental standards, in particular to prevent, in accordance with Directive 2000/60/EC, the deterioration of current water status, inter alia, by:
(a)evaluating the leachate generation potential, including contaminant content of the leachate, of the deposited waste during both the operational and after‐closure phase of the waste facility, and determining the water balance of the waste facility;
(b)preventing or minimising leachate generation and surface water or groundwater and soil from being contaminated by the waste;
(c)collecting and treating contaminated water and leachate from the waste facility to the appropriate standard required for their discharge.
2.The competent authority shall ensure that the operator has taken adequate measures to prevent or reduce dust and gas emissions.
3.Where, on the basis of an assessment of environmental risks, taking into account, in particular, Directives 76/464/EEC, 80/68/EEC or 2000/60/EC, as applicable, the competent authority has decided that collection and treatment of leachate is not necessary or it has been established that the waste facility poses no potential hazard to soil, groundwater or surface water, the requirements set out in points (b) and (c) of paragraph 1 may be reduced or waived accordingly.
4.Member States shall make the disposal of extractive waste, whether in solid, slurry or liquid form, into any receiving body of water other than one constructed for the purpose of disposing of extractive waste conditional upon compliance by the operator with the relevant requirements of Directives 76/464/EEC, 80/68/EEC and 2000/60/EC.
5.When placing extractive waste back into excavation voids, whether created through surface or underground extraction, which will be allowed to flood after closure, the operator shall take the necessary measures to prevent or minimise water status deterioration and soil pollution in accordance, mutatis mutandis, with paragraphs (1) and (3).The operator shall provide the competent authority with the information necessary to ensure compliance with Community obligations, in particular those in Directive 2000/60/EC.
6.In the case of a pond involving the presence of cyanide, the operator shall ensure that the concentration of weak acid dissociable cyanide in the pond is reduced to the lowest possible level using best available techniques and, in any case, at waste facilities which have previously been granted a permit or have already been in operation on 1 May 2008 that the concentration of weak acid dissociable cyanide at the point of discharge of the tailings from the processing plant into the pond does not exceed 50 ppm as from 1 May 2008, 25 ppm as from 1 May 2013, 10 ppm as from 1 May 2018 and 10 ppm at waste facilities which are granted a permit after 1 May 2008.
If the competent authority so requests, the operator shall demonstrate, through a risk assessment that takes site-specific conditions into account, that those concentration limits need not be further lowered.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.
Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.
Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.
The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.
For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: