Directive 2005/32/EC of the European Parliament and of the Council
of 6 July 2005
establishing a framework for the setting of ecodesign requirements for energy-using products and amending Council Directive 92/42/EEC and Directives 96/57/EC and 2000/55/EC of the European Parliament and of the Council (repealed)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Repealed by Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products (recast) (Text with EEA relevance).

Article 1 Subject matter and scope
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Article 2 Definitions
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Article 3 Placing on the market and/or putting into service
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Article 4 Responsibilities of the importer
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Article 5 Marking and declaration of conformity
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Article 6 Free movement
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Article 7 Safeguard clause
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Article 8 Conformity assessment
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Article 9 Presumption of conformity
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Article 10 Harmonised standards
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Article 11 Requirements for components and sub-assemblies
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Article 12 Administrative cooperation and exchange of information
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Article 13 Small and medium-sized enterprises
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Article 14 Consumer information
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Article 15 Implementing measures
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Article 16 Working plan
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Article 17 Self-regulation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Article 18 Consultation Forum
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Article 19 Committee procedure
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Article 20 Penalties
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Article 21 Amendments
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Article 22 Repeals
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Article 23 Review
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Article 24 Confidentiality
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Article 25 Implementation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Article 26 Entry into force
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Article 27 Addressees
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ANNEX I Method for setting generic Eco-design requirements
(referred to in Article 15)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Part 1. Ecodesign parameters for EuPs

1.1. In so far as they relate to product design, significant environmental aspects are identified with reference to the following phases of the life cycle of the product:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.2. For each phase, the following environmental aspects are to be assessed where relevant:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.3. In particular, the following parameters will be used, as appropriate, and supplemented by others, where necessary, for evaluating the potential for improving the environmental aspects mentioned in the previous paragraph:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Part 2. Requirements relating to the supply of information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Part 3. Requirements for the manufacturer

1. Addressing the environmental aspects identified in the implementing measure as capable of being influenced in a substantial manner through product design, manufacturers of EuPs will be required to perform an assessment of the EuP model throughout its lifecycle, based upon realistic assumptions about normal conditions and purposes of use. Other environmental aspects may be examined on a voluntary basis.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2. Manufacturers will make use of this assessment to evaluate alternative design solutions and the achieved environmental performance of the product against benchmarks.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ANNEX II Method for setting specific ecodesign requirements
(referred to in Article 15)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ANNEX III CE marking
(referred to in Article 5(2))
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ANNEX IV Internal design control
(referred to in Article 8)
1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2. A technical documentation file making possible an assessment of the conformity of the EuP with the requirements of the applicable implementing measure will be compiled by the manufacturer.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ANNEX V Management system for assessing conformity
(referred to in Article 8)
1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3. Environmental elements of the management system
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.1. The environmental product performance policy
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.2. Planning
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.3.1. The documentation concerning the management system should cover the following, in particular:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.3.2. The documentation concerning the EuP will specify, in particular:
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.4. Checking and corrective action
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ANNEX VI Declaration of conformity
(referred to in Article 5(3))
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ANNEX VII Contents of the implementing measures
(referred to in Article 15(8))
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ANNEX VIII . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1. Openness of participation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2. Added value
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3. Representativeness
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4. Quantified and staged objectives
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5. Involvement of civil society
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6. Monitoring and reporting
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7. Cost-effectiveness of administering a self-regulatory initiative
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8. Sustainability
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9. Incentive compatibility
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .