Article 1
Subject matter and scope
Article 2
Definitions
Article 3
Placing on the market and/or putting into service
Article 4
Responsibilities of the importer
Article 5
Marking and declaration of conformity
Article 6
Free movement
Article 7
Safeguard clause
Article 8
Conformity assessment
Article 9
Presumption of conformity
Article 10
Harmonised standards
Article 11
Requirements for components and sub-assemblies
Article 12
Administrative cooperation and exchange of information
Article 13
Small and medium-sized enterprises
Article 14
Consumer information
Article 15
Implementing measures
Article 16
Working plan
Article 17
Self-regulation
Article 18
Consultation Forum
Article 19
Committee procedure
Article 20
Penalties
Article 21
Amendments
Article 22
Repeals
Article 23
Review
Article 24
Confidentiality
Article 25
Implementation
Article 26
Entry into force
Article 27
Addressees
ANNEX I
Method for setting generic Eco-design requirements
. . . . . . . . . ..... . . . . . . . . ....
Part 1. Ecodesign parameters for EuPs
1.1.
In so far as they relate to product design, significant...
1.2.
For each phase, the following environmental aspects are to be...
1.3.
In particular, the following parameters will be used, as appropriate,...
Part 2. Requirements relating to the supply of information
Part 3. Requirements for the manufacturer
1.
Addressing the environmental aspects identified in the implementing measure as...
2.
Manufacturers will make use of this assessment to evaluate alternative...
ANNEX II
Method for setting specific ecodesign requirements
. . . . . . . . . ..... . . . . . . . . ..... . . . . . . . . ....
ANNEX III
CE marking
. . . . . . . . . ..... . . . . . . . . ..... . . . . . . . . ....
ANNEX IV
Internal design control
1.. . . . . . . . . ....
2.
A technical documentation file making possible an assessment of the...
3.. . . . . . . . . ....
ANNEX V
Management system for assessing conformity
1.. . . . . . . . . ....
2.. . . . . . . . . ....
3.
Environmental elements of the management system
3.1.
The environmental product performance policy
3.2.
Planning
3.3.. . . . . . . . . ....
3.3.1.
The documentation concerning the management system should cover the following,...
3.3.2.
The documentation concerning the EuP will specify, in particular:
3.4.
Checking and corrective action
ANNEX VI
Declaration of conformity
. . . . . . . . . ..... . . . . . . . . ....
ANNEX VII
Contents of the implementing measures
. . . . . . . . . ..... . . . . . . . . ....
ANNEX VIII
. . . . . . . . . ....
1.
Openness of participation
2.
Added value
3.
Representativeness
4.
Quantified and staged objectives
5.
Involvement of civil society
6.
Monitoring and reporting
7.
Cost-effectiveness of administering a self-regulatory initiative
8.
Sustainability
9.
Incentive compatibility
Directive 2005/32/EC of the European Parliament and of the Council
of 6 July 2005
establishing a framework for the setting of ecodesign requirements for energy-using products and amending Council Directive 92/42/EEC and Directives 96/57/EC and 2000/55/EC of the European Parliament and of the Council (repealed)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Repealed by Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products (recast) (Text with EEA relevance).