Article 1Scope
Article 2. . . . . . . . . ....
Article 3Object
Article 4Definitions
Article 5Applicability to sub-assemblies
Article 6Essential requirements and assessment of conformity
Article 7Conformity marking
Article 8Placing on the market and putting into use
Article 9Conformity assessment
Article 10Technical Documentation
Article 11Notification
Article 12Criteria to be satisfied by designated bodies
Article 13Harmonised standards and normative documents
Article 14Standing Committee
Article 15Measuring Instruments Committee
Article 16Functions of the Measuring Instruments Committee
Article 17Markings
Article 18Market surveillance and administrative cooperation
Article 19Safeguard clause
Article 20Unduly fixed markings
Article 21Decisions entailing refusal or restriction
Article 22Repeals
Article 23Transitional provisions
Article 24Transposition
Article 25Revision clause
Article 26Entry into force
Article 27Addressees
ANNEX IESSENTIAL REQUIREMENTS
. . . . . . . . . ....
. . . . . . . . . ....
. . . . . . . . . ....
DEFINITIONS
REQUIREMENTS
1.Allowable Errors
1.1.. . . . . . . . . ....
1.2.. . . . . . . . . ....
1.3.. . . . . . . . . ....
1.3.1.Climatic environments
1.3.2.. . . . . . . . . ....
1.3.3.. . . . . . . . . ....
1.3.4.. . . . . . . . . ....
1.4.. . . . . . . . . ....
1.4.1.Basic rules for testing and the determination of errors
1.4.2.Ambient humidity
2.Reproducibility
3.Repeatability
4.Discrimination and Sensitivity
5.Durability
6.Reliability
7.Suitability
7.1.. . . . . . . . . ....
7.2.. . . . . . . . . ....
7.3.. . . . . . . . . ....
7.4.. . . . . . . . . ....
7.5.. . . . . . . . . ....
7.6.. . . . . . . . . ....
8.Protection against corruption
8.1.. . . . . . . . . ....
8.2.. . . . . . . . . ....
8.3.. . . . . . . . . ....
8.4.. . . . . . . . . ....
8.5.. . . . . . . . . ....
9.Information to be borne by and to accompany the instrument...
9.1.. . . . . . . . . ....
9.2.. . . . . . . . . ....
9.3.. . . . . . . . . ....
9.4.. . . . . . . . . ....
9.5.. . . . . . . . . ....
9.6.. . . . . . . . . ....
9.7.. . . . . . . . . ....
9.8.. . . . . . . . . ....
10.Indication of result
10.1.. . . . . . . . . ....
10.2.. . . . . . . . . ....
10.3.. . . . . . . . . ....
10.4.. . . . . . . . . ....
10.5.. . . . . . . . . ....
11.Further processing of data to conclude the trading transaction
11.1.. . . . . . . . . ....
11.2.. . . . . . . . . ....
12.Conformity evaluation
ANNEX ADECLARATION OF CONFORMITY BASED ON INTERNAL PRODUCTION CONTROL
1.. . . . . . . . . ....
Technical documentation
2.. . . . . . . . . ....
3.. . . . . . . . . ....
Manufacturing
4.. . . . . . . . . ....
Written declaration of conformity
5.1.. . . . . . . . . ....
5.2.. . . . . . . . . ....
Authorised representative
6.. . . . . . . . . ....
ANNEX A1DECLARATION OF CONFORMITY BASED ON INTERNAL PRODUCTION CONTROL PLUS PRODUCT TESTING BY A NOTIFIED BODY
1.. . . . . . . . . ....
Technical documentation
2.. . . . . . . . . ....
3.. . . . . . . . . ....
Manufacturing
4.. . . . . . . . . ....
Product checks
5.. . . . . . . . . ....
Written declaration of conformity
6.1.. . . . . . . . . ....
6.2.. . . . . . . . . ....
Authorised representative
7.. . . . . . . . . ....
ANNEX BTYPE EXAMINATION
1.. . . . . . . . . ....
2.. . . . . . . . . ....
3.. . . . . . . . . ....
4.. . . . . . . . . ....
5.1.. . . . . . . . . ....
5.2.. . . . . . . . . ....
5.3.. . . . . . . . . ....
6.. . . . . . . . . ....
7.. . . . . . . . . ....
8.. . . . . . . . . ....
9.. . . . . . . . . ....
ANNEX CDECLARATION OF CONFORMITY TO TYPE BASED ON INTERNAL PRODUCTION CONTROL
1.. . . . . . . . . ....
Manufacturing
2.. . . . . . . . . ....
Written declaration of conformity
3.1.. . . . . . . . . ....
3.2.. . . . . . . . . ....
Authorised representative
4.. . . . . . . . . ....
ANNEX C1DECLARATION OF CONFORMITY TO TYPE BASED ON INTERNAL PRODUCTION CONTROL PLUS PRODUCT TESTING BY A NOTIFIED BODY
1.. . . . . . . . . ....
Manufacturing
2.. . . . . . . . . ....
Product checks
3.. . . . . . . . . ....
Written declaration of conformity
4.1.. . . . . . . . . ....
4.2.. . . . . . . . . ....
Authorised representative
5.. . . . . . . . . ....
ANNEX DDECLARATION OF CONFORMITY TO TYPE BASED ON QUALITY ASSURANCE OF THE PRODUCTION PROCESS
1.. . . . . . . . . ....
Manufacturing
2.. . . . . . . . . ....
Quality system
3.1.. . . . . . . . . ....
3.2.. . . . . . . . . ....
3.3.. . . . . . . . . ....
3.4.. . . . . . . . . ....
3.5.. . . . . . . . . ....
Surveillance under the responsibility of the notified body
4.1.. . . . . . . . . ....
4.2.. . . . . . . . . ....
4.3.. . . . . . . . . ....
4.4.. . . . . . . . . ....
Written declaration of conformity
5.1.. . . . . . . . . ....
5.2.. . . . . . . . . ....
6.. . . . . . . . . ....
7.. . . . . . . . . ....
Authorised representative
8.. . . . . . . . . ....
ANNEX D1DECLARATION OF CONFORMITY BASED ON QUALITY ASSURANCE OF THE PRODUCTION PROCESS
1.. . . . . . . . . ....
Technical documentation
2.. . . . . . . . . ....
3.. . . . . . . . . ....
Manufacturing
4.. . . . . . . . . ....
Quality system
5.1.. . . . . . . . . ....
5.2.. . . . . . . . . ....
5.3.. . . . . . . . . ....
5.4.. . . . . . . . . ....
5.5.. . . . . . . . . ....
Surveillance under the responsibility of the notified body
6.1.. . . . . . . . . ....
6.2.. . . . . . . . . ....
6.3.. . . . . . . . . ....
6.4.. . . . . . . . . ....
Written declaration of conformity
7.1.. . . . . . . . . ....
7.2.. . . . . . . . . ....
8.. . . . . . . . . ....
9.. . . . . . . . . ....
Authorised representative
10.. . . . . . . . . ....
ANNEX EDECLARATION OF CONFORMITY TO TYPE BASED ON QUALITY ASSURANCE OF FINAL PRODUCT INSPECTION AND TESTING
1.. . . . . . . . . ....
Manufacturing
2.. . . . . . . . . ....
Quality system
3.1.. . . . . . . . . ....
3.2.. . . . . . . . . ....
3.3.. . . . . . . . . ....
3.4.. . . . . . . . . ....
3.5.. . . . . . . . . ....
Surveillance under the responsibility of the notified body
4.1.. . . . . . . . . ....
4.2.. . . . . . . . . ....
4.3.. . . . . . . . . ....
4.4.. . . . . . . . . ....
Written declaration of conformity
5.1.. . . . . . . . . ....
5.2.. . . . . . . . . ....
6.. . . . . . . . . ....
7.. . . . . . . . . ....
Authorised representative
8.. . . . . . . . . ....
ANNEX E1DECLARATION OF CONFORMITY BASED ON QUALITY ASSURANCE OF FINAL PRODUCT INSPECTION AND TESTING
1.. . . . . . . . . ....
Technical documentation
2.. . . . . . . . . ....
3.. . . . . . . . . ....
Manufacturing
4.. . . . . . . . . ....
Quality system
5.1.. . . . . . . . . ....
5.2.. . . . . . . . . ....
5.3.. . . . . . . . . ....
5.4.. . . . . . . . . ....
5.5.. . . . . . . . . ....
Surveillance under the responsibility of the notified body
6.1.. . . . . . . . . ....
6.2.. . . . . . . . . ....
6.3.. . . . . . . . . ....
6.4.. . . . . . . . . ....
Written declaration of conformity
7.1.. . . . . . . . . ....
7.2.. . . . . . . . . ....
8.. . . . . . . . . ....
9.. . . . . . . . . ....
Authorised representative
10.. . . . . . . . . ....
ANNEX FDECLARATION OF CONFORMITY TO TYPE BASED ON PRODUCT VERIFICATION
1.. . . . . . . . . ....
Manufacturing
2.. . . . . . . . . ....
Verification
3.. . . . . . . . . ....
4.Verification of conformity with the metrological requirements by examination and...
4.1.. . . . . . . . . ....
4.2.. . . . . . . . . ....
5.Statistical verification of conformity with the metrological requirements.
5.1.. . . . . . . . . ....
5.2.. . . . . . . . . ....
5.3.. . . . . . . . . ....
5.4.. . . . . . . . . ....
5.5.. . . . . . . . . ....
Written declaration of conformity
6.1.. . . . . . . . . ....
6.2.. . . . . . . . . ....
7.. . . . . . . . . ....
Authorised representative
8.. . . . . . . . . ....
ANNEX F1DECLARATION OF CONFORMITY BASED ON PRODUCT VERIFICATION
1.. . . . . . . . . ....
Technical documentation
2.. . . . . . . . . ....
3.. . . . . . . . . ....
Manufacturing
4.. . . . . . . . . ....
Verification
5.. . . . . . . . . ....
6.Verification of conformity with the metrological requirements by examination and...
6.1.. . . . . . . . . ....
6.2.. . . . . . . . . ....
7.Statistical verification of conformity with the metrological requirements.
7.1.. . . . . . . . . ....
7.2.. . . . . . . . . ....
7.3.. . . . . . . . . ....
7.4.. . . . . . . . . ....
7.5.. . . . . . . . . ....
Written declaration of conformity
8.1.. . . . . . . . . ....
8.2.. . . . . . . . . ....
9.. . . . . . . . . ....
Authorised representative
10.. . . . . . . . . ....
ANNEX GDECLARATION OF CONFORMITY BASED ON UNIT VERIFICATION
1.. . . . . . . . . ....
Technical documentation
2.. . . . . . . . . ....
Manufacturing
3.. . . . . . . . . ....
Verification
4.. . . . . . . . . ....
Written declaration of conformity
5.1.. . . . . . . . . ....
5.2.. . . . . . . . . ....
Authorised representative
6.. . . . . . . . . ....
ANNEX HDECLARATION OF CONFORMITY BASED ON FULL QUALITY ASSURANCE
1.. . . . . . . . . ....
Manufacturing
2.. . . . . . . . . ....
Quality system
3.1.. . . . . . . . . ....
3.2.. . . . . . . . . ....
3.3.. . . . . . . . . ....
3.4.. . . . . . . . . ....
3.5.. . . . . . . . . ....
Surveillance under the responsibility of the notified body
4.1.. . . . . . . . . ....
4.2.. . . . . . . . . ....
4.3.. . . . . . . . . ....
4.4.. . . . . . . . . ....
Written declaration of conformity
5.1.. . . . . . . . . ....
5.2.. . . . . . . . . ....
6.. . . . . . . . . ....
7.. . . . . . . . . ....
Authorised representative
8.. . . . . . . . . ....
ANNEX H1DECLARATION OF CONFORMITY BASED ON FULL QUALITY ASSURANCE PLUS DESIGN EXAMINATION
1.. . . . . . . . . ....
Manufacturing
2.. . . . . . . . . ....
Quality system
3.1.. . . . . . . . . ....
3.2.. . . . . . . . . ....
3.3.. . . . . . . . . ....
3.4.. . . . . . . . . ....
3.5.. . . . . . . . . ....
3.6.. . . . . . . . . ....
Design examination
4.1.. . . . . . . . . ....
4.2.. . . . . . . . . ....
4.3.. . . . . . . . . ....
4.3.1.. . . . . . . . . ....
4.3.2.. . . . . . . . . ....
4.3.3.. . . . . . . . . ....
4.4.. . . . . . . . . ....
4.5.. . . . . . . . . ....
4.6.. . . . . . . . . ....
Surveillance under the responsibility of the notified body
5.1.. . . . . . . . . ....
5.2.. . . . . . . . . ....
5.3.. . . . . . . . . ....
5.4.. . . . . . . . . ....
Written declaration of conformity
6.1.. . . . . . . . . ....
6.2.. . . . . . . . . ....
7.. . . . . . . . . ....
Authorised representative
8.. . . . . . . . . ....
ANNEX MI-001WATER METERS
. . . . . . . . . ....
DEFINITIONS
SPECIFIC REQUIREMENTS
Rated Operating Conditions
1.. . . . . . . . . ....
2.. . . . . . . . . ....
3.. . . . . . . . . ....
4.. . . . . . . . . ....
MPE
5.. . . . . . . . . ....
6.. . . . . . . . . ....
6a.. . . . . . . . . ....
Permissible Effect of Disturbances
7.1.Electromagnetic immunity
7.1.1.. . . . . . . . . ....
7.1.2.. . . . . . . . . ....
7.1.3.. . . . . . . . . ....
7.2.Durability
7.2.1.. . . . . . . . . ....
7.2.2.. . . . . . . . . ....
Suitability
8.1.. . . . . . . . . ....
8.2.. . . . . . . . . ....
Units of Measurement
9.. . . . . . . . . ....
Putting into Use
10.. . . . . . . . . ....
CONFORMITY ASSESSMENT
ANNEX MI-002GAS METERS AND VOLUME CONVERSION DEVICES
. . . . . . . . . ....
DEFINITIONS
PART I —SPECIFIC REQUIREMENTS — GAS METERS
1.Rated operating conditions
1.1.. . . . . . . . . ....
1.2.. . . . . . . . . ....
1.3.The fuel/gas related conditions
1.4.. . . . . . . . . ....
1.5.. . . . . . . . . ....
2.Maximum permissible error (MPEs)
2.1.Gas meter indicating the volume at metering conditions or mass...
2.2.. . . . . . . . . ....
3.Permissible effect of disturbances
3.1.Electromagnetic immunity
3.1.1.. . . . . . . . . ....
3.1.2.. . . . . . . . . ....
3.1.3.. . . . . . . . . ....
3.2.Effect of upstream-downstream flow disturbances
4.Durability
4.1.Class 1,5 meters
4.1.1.. . . . . . . . . ....
4.1.2.. . . . . . . . . ....
4.2.Class 1,0 meters
4.2.1.. . . . . . . . . ....
4.2.2.. . . . . . . . . ....
5.Suitability
5.1.. . . . . . . . . ....
5.2.. . . . . . . . . ....
5.3.. . . . . . . . . ....
5.4.. . . . . . . . . ....
5.5.. . . . . . . . . ....
5.6.. . . . . . . . . ....
6.Units
PART II —SPECIFIC REQUIREMENTS — VOLUME CONVERSION DEVICES
7.Base conditions for converted quantities
8.MPE
9.Suitability
9.1.. . . . . . . . . ....
9.2.. . . . . . . . . ....
PART III —PUTTING INTO USE AND CONFORMITY ASSESSMENT
Putting into use
10.. . . . . . . . . ....
CONFORMITY ASSESSMENT
ANNEX MI-003ACTIVE ELECTRICAL ENERGY METERS
. . . . . . . . . ....
DEFINITIONS
SPECIFIC REQUIREMENTS
1.Accuracy
2.Rated operating conditions
3.MPEs
4.Permissible effect of disturbances
4.1.General
4.2.Effect of disturbances of long duration
4.3.Permissible effect of transient electromagnetic phenomena
4.3.1.. . . . . . . . . ....
4.3.2.. . . . . . . . . ....
5.Suitability
5.1.. . . . . . . . . ....
5.2.. . . . . . . . . ....
5.3.. . . . . . . . . ....
5.4.Running with no load
5.5.Starting
6.Units
7.Putting into use
CONFORMITY ASSESSMENT
ANNEX MI-004HEAT METERS
. . . . . . . . . ....
DEFINITIONS
SPECIFIC REQUIREMENTS
1.Rated operating conditions
1.1.. . . . . . . . . ....
1.2.. . . . . . . . . ....
1.3.. . . . . . . . . ....
1.4.. . . . . . . . . ....
2.Accuracy classes
3.MPEs applicable to complete heat meters
4.Permissible influences of electromagnetic disturbances
4.1.. . . . . . . . . ....
4.2.. . . . . . . . . ....
4.3.. . . . . . . . . ....
5.Durability
5.1.. . . . . . . . . ....
5.2.. . . . . . . . . ....
6.Inscriptions on a heat meter
7.Sub-assemblies
7.1.. . . . . . . . . ....
7.2.. . . . . . . . . ....
7.3.. . . . . . . . . ....
7.4.. . . . . . . . . ....
7.5.. . . . . . . . . ....
PUTTING INTO USE
8.. . . . . . . . . ....
CONFORMITY ASSESSMENT
ANNEX MI-005MEASURING SYSTEMS FOR THE CONTINUOUS AND DYNAMIC MEASUREMENT OF QUANTITIES OF LIQUIDS OTHER THAN WATER
. . . . . . . . . ....
DEFINITIONS
SPECIFIC REQUIREMENTS
1.Rated operating conditions
1.1.. . . . . . . . . ....
1.2.. . . . . . . . . ....
1.3.. . . . . . . . . ....
1.4.. . . . . . . . . ....
2.Accuracy classification and maximum permissible errors (MPEs)
2.1.. . . . . . . . . ....
2.2.. . . . . . . . . ....
2.3.. . . . . . . . . ....
2.4.1.. . . . . . . . . ....
2.4.2.. . . . . . . . . ....
2.5.Converted indication
2.6.Conversion devices
2.7.. . . . . . . . . ....
2.8.. . . . . . . . . ....
3.Maximum permissible effect of disturbances
3.1.. . . . . . . . . ....
3.2.. . . . . . . . . ....
4.Durability
5.Suitability
5.1.. . . . . . . . . ....
5.2.. . . . . . . . . ....
5.3.. . . . . . . . . ....
5.4.Instruments for direct sales
5.4.1.. . . . . . . . . ....
5.4.2.. . . . . . . . . ....
5.4.3.. . . . . . . . . ....
5.4.4.. . . . . . . . . ....
5.5.Fuel Dispensers
5.5.1.. . . . . . . . . ....
5.5.2.. . . . . . . . . ....
5.5.3.. . . . . . . . . ....
6.Power supply failure
7.Putting into use
8.Units of measurement
CONFORMITY ASSESSMENT
ANNEX MI-006AUTOMATIC WEIGHING INSTRUMENTS
. . . . . . . . . ....
DEFINITIONS
SPECIFIC REQUIREMENTS
CHAPTER I —Requirements common to all types of automatic weighing instruments
1.Rated Operating Conditions
1.1.. . . . . . . . . ....
1.2.. . . . . . . . . ....
1.3.. . . . . . . . . ....
1.4.. . . . . . . . . ....
2.Permissible effect of disturbances - Electromagnetic environment
3.Suitability
3.1.. . . . . . . . . ....
3.2.. . . . . . . . . ....
3.3.. . . . . . . . . ....
3.4.. . . . . . . . . ....
3.5.. . . . . . . . . ....
3.6.. . . . . . . . . ....
4.Conformity assessment
CHAPTER II —Automatic Catchweighers
1.Accuracy Classes
1.1.. . . . . . . . . ....
1.2.. . . . . . . . . ....
2.Category X Instruments
2.1.. . . . . . . . . ....
2.2.. . . . . . . . . ....
3.Category Y Instruments
4.MPE
4.1.Mean error Category X / MPE Category Y instruments
4.2.Standard deviation
4.3.Verification scale interval — single interval instruments
4.4.Verification scale interval — multi-interval instruments
5.Measurement Range
6.Dynamic Setting
6.1.. . . . . . . . . ....
6.2.. . . . . . . . . ....
7.Performance Under Influence Factors And Electromagnetic Disturbances
7.1.. . . . . . . . . ....
7.1.1.. . . . . . . . . ....
7.1.2.. . . . . . . . . ....
7.2.. . . . . . . . . ....
7.3.. . . . . . . . . ....
CHAPTER III —Automatic Gravimetric Filling Instruments
1.Accuracy classes
1.1.. . . . . . . . . ....
1.2.. . . . . . . . . ....
1.3.. . . . . . . . . ....
1.4.. . . . . . . . . ....
2.MPE
2.1.Static weighing error
2.1.1.. . . . . . . . . ....
2.1.2.. . . . . . . . . ....
2.2.Deviation from average fill
2.3.Error relative to pre-set value (setting error)
3.Performance Under Influence Factor And Electromagnetic Disturbance
3.1.. . . . . . . . . ....
3.2.. . . . . . . . . ....
3.3.. . . . . . . . . ....
CHAPTER IV —Discontinuous Totalisers
1.Accuracy Classes
2.MPEs
3.Totalisation scale interval
4.Minimum Totalised Load (Σmin)
5.Zero Setting
6.Operator Interface
7.Printout
8.Performance under influence factors and electromagnetic disturbances
8.1.. . . . . . . . . ....
8.2.. . . . . . . . . ....
CHAPTER V —Continuous Totalisers
1.Accuracy classes
2.Measurement Range
2.1.. . . . . . . . . ....
2.2.. . . . . . . . . ....
3.MPE
4.Speed of the belt
5.General Totalisation Device
6.Performance under influence factors and electromagnetic disturbances
6.1.. . . . . . . . . ....
6.2.. . . . . . . . . ....
CHAPTER VI —Automatic Rail Weighbridges
1.Accuracy classes
2.MPE
2.1.. . . . . . . . . ....
2.2.. . . . . . . . . ....
2.3.. . . . . . . . . ....
2.4.. . . . . . . . . ....
3.Scale interval (d)
4.Measurement range
4.1.. . . . . . . . . ....
4.2.. . . . . . . . . ....
5.Performance under influence factor and electromagnetic disturbance
5.1.. . . . . . . . . ....
5.2.. . . . . . . . . ....
ANNEX MI-007TAXIMETERS
. . . . . . . . . ....
DEFINITIONS
Taximeter
Fare
Cross-over speed
Normal calculation mode S (single application of tariff)
Normal calculation mode D (double application of tariff)
Operating position
DESIGN REQUIREMENTS
1.. . . . . . . . . ....
2.. . . . . . . . . ....
3.. . . . . . . . . ....
4.. . . . . . . . . ....
5.. . . . . . . . . ....
RATED OPERATING CONDITIONS
6.1.. . . . . . . . . ....
6.2.. . . . . . . . . ....
MAXIMUM PERMISSIBLE ERRORS (MPEs)
7.. . . . . . . . . ....
PERMISSIBLE EFFECT OF DISTURBANCES
8.Electromagnetic immunity
8.1.. . . . . . . . . ....
8.2.. . . . . . . . . ....
POWER SUPPLY FAILURE
9.. . . . . . . . . ....
OTHER REQUIREMENTS
10.. . . . . . . . . ....
11.. . . . . . . . . ....
12.. . . . . . . . . ....
13.. . . . . . . . . ....
14.1.. . . . . . . . . ....
14.2.. . . . . . . . . ....
14.3.. . . . . . . . . ....
15.1.. . . . . . . . . ....
15.2.. . . . . . . . . ....
15.3.. . . . . . . . . ....
16.. . . . . . . . . ....
17.. . . . . . . . . ....
18.. . . . . . . . . ....
19.. . . . . . . . . ....
20.. . . . . . . . . ....
21.. . . . . . . . . ....
22.. . . . . . . . . ....
23.. . . . . . . . . ....
CONFORMITY ASSESSMENT
ANNEX MI-008MATERIAL MEASURES
CHAPTER I —Material measures of length
DEFINITIONS
SPECIFIC REQUIREMENTS
Reference Conditions
1.1.. . . . . . . . . ....
1.2.. . . . . . . . . ....
MPEs
2.. . . . . . . . . ....
Materials
3.1.. . . . . . . . . ....
3.2.. . . . . . . . . ....
Markings
4.. . . . . . . . . ....
CONFORMITY ASSESSMENT
CHAPTER II —Capacity serving measures
DEFINITIONS
SPECIFIC REQUIREMENTS
1.Reference Conditions
1.1.. . . . . . . . . ....
1.2.. . . . . . . . . ....
2.MPEs
3.Materials
4.Shape
4.1.. . . . . . . . . ....
4.2.. . . . . . . . . ....
5.Marking
5.1.. . . . . . . . . ....
5.2.. . . . . . . . . ....
5.3.. . . . . . . . . ....
CONFORMITY ASSESSMENT
ANNEX MI-009DIMENSIONAL MEASURING INSTRUMENTS
. . . . . . . . . ....
DEFINITIONS
CHAPTER I —Equirements common to all dimensional measuring instruments
Electromagnetic immunity
1.. . . . . . . . . ....
2.. . . . . . . . . ....
CONFORMITY ASSESSMENT
CHAPTER II —Length measuring instruments
Characteristics of the product to be measured
1.. . . . . . . . . ....
Operating conditions
2.1.Range
2.2.. . . . . . . . . ....
2.3.. . . . . . . . . ....
MPEs
3.Instrument
Other requirements
4.. . . . . . . . . ....
CHAPTER III —Area measuring instruments
Operating conditions
1.1.Range
1.2.Condition of the product
MPEs
2.Instrument
Other requirements
3.Presentation of the product
4.Scale interval
CHAPTER IV —Multidimensional measuring instruments
Operating conditions
1.1.Range
1.2.Minimum dimension
1.3.Speed of the product
MPE
2.Instrument:
ANNEX MI-010EXHAUST GAS ANALYSERS
. . . . . . . . . ....
DEFINITIONS
SPECIFIC REQUIREMENTS
Instrument Classes
1.. . . . . . . . . ....
Rated operating conditions
2.. . . . . . . . . ....
2.1.. . . . . . . . . ....
2.2.. . . . . . . . . ....
2.3.. . . . . . . . . ....
Maximum permissible errors (MPEs)
3.. . . . . . . . . ....
3.1.. . . . . . . . . ....
3.2.. . . . . . . . . ....
Permissible effect of disturbances
4.. . . . . . . . . ....
5.. . . . . . . . . ....
Other requirements
6.. . . . . . . . . ....
7.. . . . . . . . . ....
8.. . . . . . . . . ....
9.. . . . . . . . . ....
10.. . . . . . . . . ....
11.. . . . . . . . . ....
12.. . . . . . . . . ....
13.. . . . . . . . . ....
14.. . . . . . . . . ....
CONFORMITY ASSESSMENT

Directive 2004/22/EC of the European Parliament and of the Council

of 31 March 2004

on measuring instruments

(Text with EEA relevance) (repealed)

F1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .