Article 1The best available techniques (BAT) conclusions for surface treatment using...
Article 2This Decision is addressed to the Member States.
ANNEX Best available techniques (BAT) conclusions for surface treatment using organic solvents including preservation of wood and wood products with chemicals
SCOPE DEFINITIONS ACRONYMS GENERAL CONSIDERATIONS Best Available Techniques Emission levels associated with the best available techniques (BAT-AELs) BAT-AELs for total and fugitive VOC emissions BAT-AELs and indicative emission levels for emissions in waste gases...BAT-AELs for emissions to water Other environmental performance levels Specific energy consumption (energy efficiency) levels associated with the best...Specific water consumption levels associated with the best available techniques...Indicative levels for specific waste quantity sent off site 1.BAT CONCLUSIONS FOR SURFACE TREATMENT USING ORGANIC SOLVENTS 1.1.General BAT conclusions 1.1.1.Environmental Management Systems BAT 1.In order to improve the overall environmental performance, BAT is...Note Applicability 1.1.2.Overall environmental performance BAT 2.In order to improve the overall environmental performance of the...1.1.3.Selection of raw materials BAT 3.In order to prevent or reduce the environmental impact of...BAT 4.In order to reduce solvent consumption, VOC emissions and the...1.1.4.Storage and handling of raw materials BAT 5.In order to prevent or reduce fugitive VOC emissions during...1.1.5.Distribution of raw materials BAT 6.In order to reduce raw material consumption and VOC emissions,...1.1.6.Coating application BAT 7.In order to reduce raw material consumption and the overall...1.1.7.Drying/curing BAT 8.In order to reduce energy consumption and the overall environmental...1.1.8.Cleaning BAT 9.In order to reduce VOC emissions from cleaning processes, BAT...1.1.9.Monitoring 1.1.9.1.Solvent mass balance BAT 10.BAT is to monitor total and fugitive VOC emissions by...1.1.9.2.Emissions in waste gases BAT 11.BAT is to monitor emissions in waste gases with at...1.1.9.3.Emissions to water BAT 12.BAT is to monitor emissions to water with at least...1.1.10.Emissions during OTNOC BAT 13.In order to reduce the frequency of the occurrence of...1.1.11.Emissions in waste gases 1.1.11.1.VOC emissions BAT 14.In order to reduce VOC emissions from the production and...BAT 15.In order to reduce VOC emissions in waste gases and...BAT 16.In order to reduce the energy consumption of the VOC...1.1.11.2.NOX and CO emissions BAT 17.In order to reduce NOX emissions in waste gases while...1.1.11.3.Dust emissions BAT 18.In order to reduce dust emissions in waste gases from...1.1.12.Energy efficiency BAT 19.In order to use energy efficiently, BAT is to use...1.1.13.Water use and waste water generation BAT 20.In order to reduce water consumption and waste water generation...1.1.14.Emissions to water BAT 21.In order to reduce emissions to water and/or to facilitate...1.1.15.Waste management BAT 22.In order to reduce the quantity of waste sent for...1.1.16.Odour emissions BAT 23.In order to prevent or, where that is not practicable,...Applicability 1.2.BAT conclusions for the coating of vehicles 1.2.1.VOC emissions and energy and raw material consumption BAT 24.In order to reduce the consumption of solvents, other raw...1.2.2.Waste quantity sent off site 1.3.BAT conclusions for the coating of other metal and plastic...1.4.BAT conclusions for the coating of ships and yachts BAT 25.In order to reduce total emissions of VOCs and dust...1.5.BAT conclusions for the coating of aircraft BAT 26:In order to reduce total emissions of VOCs and to...1.6.BAT conclusions for coil coating 1.7.BAT conclusions for the manufacturing of adhesive tapes 1.8.BAT conclusions for the coating of textiles, foils and paper...1.9.BAT conclusions for the manufacturing of winding wire BAT 27.In order to reduce total emissions of VOCs and energy...1.10.BAT conclusions for the coating and printing of metal packaging...1.11.BAT conclusions for heatset web offset printing BAT 28.In order to reduce total VOC emissions, BAT is to...1.12.BAT conclusions for flexography and non-publication rotogravure printing 1.13.BAT conclusions for publication rotogravure printing BAT 29.In order to reduce VOC emissions from publication rotogravure printing,...1.14.BAT conclusions for the coating of wooden surfaces 2.BAT CONCLUSIONS FOR PRESERVATION OF WOOD AND WOOD PRODUCTS WITH...2.1.Environmental management systems BAT 30.In order to improve the overall environmental performance, BAT is...Note Applicability 2.2.Substitution of harmful/hazardous substances BAT 31.In order to prevent or reduce emissions of PAHs and/or...Description Applicability BAT 32.In order to reduce the environmental risk posed by the...Applicability 2.3.Resource efficiency BAT 33.In order to increase resource efficiency and to reduce the...2.4.Delivery, storage and handling of treatment chemicals BAT 34.In order to reduce emissions from delivery, storage and handling...2.5.Preparation/conditioning of wood BAT 35.In order to reduce the consumption of treatment chemicals and...2.6.Preservative application process BAT 36.In order to prevent accidental leakage and emissions of treatment...BAT 37.In order to reduce emissions of aerosols from wood and...BAT 38.In order to prevent or reduce emissions of treatment chemicals...BAT 39.In order to reduce energy consumption in pressure processes (autoclaves),...Description Applicability 2.7.Post-treatment conditioning and interim storage BAT 40.In order to prevent or reduce the contamination of soil...Description 2.8.Waste management BAT 41.In order to reduce the quantity of waste sent for...BAT 42.In order to reduce the environmental risk related to waste...2.9.Monitoring 2.9.1.Emissions to water BAT 43.BAT is to monitor pollutants in waste water and potentially...2.9.2.Groundwater quality BAT 44.BAT is to monitor pollutants in groundwater with a frequency...2.9.3.Emissions in waste gases BAT 45.BAT is to monitor emissions in waste gases with a...2.10.Emissions to soil and groundwater BAT 46.In order to prevent or reduce emissions to soil and...2.11.Emissions to water and waste water management BAT 47.In order to prevent or, where that is not practicable,...BAT 48.In order to reduce emissions to water from wood and...Description: 2.12.Emissions to air BAT 49.In order to reduce emissions of VOCs to air from...BAT 50.In order to reduce emissions of organic compounds and odour...Applicability BAT 51.In order to reduce emissions of organic compounds to air...BAT 52.In order to reduce NOX emissions in waste gases while...2.13.Noise BAT 53.In order to prevent or, where that is not practicable,...Applicability

Commission Implementing Decision (EU) 2020/2009

of 22 June 2020

establishing the best available techniques (BAT) conclusions, under Directive 2010/75/EU of the European Parliament and of the Council on industrial emissions, for surface treatment using organic solvents including preservation of wood and wood products with chemicals

(notified under document C(2020) 4050)

(Text with EEA relevance)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Directive 2010/75/EU of the European Parliament and of the Council of 24 November 2010 on industrial emissions (integrated pollution prevention and control)1, and in particular Article 13(5) thereof,

Whereas:

(1)

Best available techniques (BAT) conclusions are the reference for setting permit conditions for installations covered by Chapter II of Directive 2010/75/EU and competent authorities should set emission limit values which ensure that, under normal operating conditions, emissions do not exceed the emission levels associated with the best available techniques as laid down in the BAT conclusions.

(2)

The forum composed of representatives of Member States, the industries concerned and non-governmental organisations promoting environmental protection, established by Commission Decision of 16 May 20112, provided the Commission on 18 November 2019 with its opinion on the proposed content of the BAT reference document for surface treatment using organic solvents including preservation of wood and wood products with chemicals. That opinion is publicly available.

(3)

The BAT conclusions set out in the Annex to this Decision are the key element of that BAT reference document.

(4)

The measures provided for in this Decision are in accordance with the opinion of the Committee established by Article 75(1) of Directive 2010/75/EU,

HAS ADOPTED THIS DECISION: