Search Legislation

Commission Implementing Decision (EU) 2020/2009Show full title

Commission Implementing Decision (EU) 2020/2009 of 22 June 2020 establishing the best available techniques (BAT) conclusions, under Directive 2010/75/EU of the European Parliament and of the Council on industrial emissions, for surface treatment using organic solvents including preservation of wood and wood products with chemicals (notified under document C(2020) 4050) (Text with EEA relevance)

 Help about what version

What Version

Close

This is a legislation item that originated from the EU

After exit day there will be three versions of this legislation to consult for different purposes. The legislation.gov.uk version is the version that applies in the UK. The EU Version currently on EUR-lex is the version that currently applies in the EU i.e you may need this if you operate a business in the EU.

The web archive version is the official version of this legislation item as it stood on exit day before being published to legislation.gov.uk and any subsequent UK changes and effects applied. The web archive also captured associated case law and other language formats from EUR-Lex.

Changes to legislation:

There are outstanding changes not yet made to Commission Implementing Decision (EU) 2020/2009. Those changes will be listed when you open the content using the Table of Contents below. Any changes that have already been made to the legislation appear in the content and are referenced with annotations. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the affected provisions when you open the content using the Table of Contents below.

  1. Introductory Text

  2. Article 1.The best available techniques (BAT) conclusions for surface treatment using...

  3. Article 2.This Decision is addressed to the Member States.

  4. Signature

    1. ANNEX

      Best available techniques (BAT) conclusions for surface treatment using organic solvents including preservation of wood and wood products with chemicals

      1. SCOPE

      2. DEFINITIONS

      3. ACRONYMS

      4. GENERAL CONSIDERATIONS

        1. Best Available Techniques

        2. Emission levels associated with the best available techniques (BAT-AELs)

          1. BAT-AELs for total and fugitive VOC emissions

          2. BAT-AELs and indicative emission levels for emissions in waste gases...

          3. BAT-AELs for emissions to water

        3. Other environmental performance levels

          1. Specific energy consumption (energy efficiency) levels associated with the best...

          2. Specific water consumption levels associated with the best available techniques...

        4. Indicative levels for specific waste quantity sent off site

      5. 1. BAT CONCLUSIONS FOR SURFACE TREATMENT USING ORGANIC SOLVENTS

        1. 1.1. General BAT conclusions

          1. 1.1.1. Environmental Management Systems

            1. BAT 1. In order to improve the overall environmental performance, BAT is...

              1. Note

              2. Applicability

          2. 1.1.2. Overall environmental performance

            1. BAT 2. In order to improve the overall environmental performance of the...

          3. 1.1.3. Selection of raw materials

            1. BAT 3. In order to prevent or reduce the environmental impact of...

            2. BAT 4. In order to reduce solvent consumption, VOC emissions and the...

          4. 1.1.4. Storage and handling of raw materials

            1. BAT 5. In order to prevent or reduce fugitive VOC emissions during...

          5. 1.1.5. Distribution of raw materials

            1. BAT 6. In order to reduce raw material consumption and VOC emissions,...

          6. 1.1.6. Coating application

            1. BAT 7. In order to reduce raw material consumption and the overall...

          7. 1.1.7. Drying/curing

            1. BAT 8. In order to reduce energy consumption and the overall environmental...

          8. 1.1.8. Cleaning

            1. BAT 9. In order to reduce VOC emissions from cleaning processes, BAT...

          9. 1.1.9. Monitoring

            1. 1.1.9.1. Solvent mass balance

              1. BAT 10. BAT is to monitor total and fugitive VOC emissions by...

            2. 1.1.9.2. Emissions in waste gases

              1. BAT 11. BAT is to monitor emissions in waste gases with at...

            3. 1.1.9.3. Emissions to water

              1. BAT 12. BAT is to monitor emissions to water with at least...

          10. 1.1.10. Emissions during OTNOC

            1. BAT 13. In order to reduce the frequency of the occurrence of...

          11. 1.1.11. Emissions in waste gases

            1. 1.1.11.1. VOC emissions

              1. BAT 14. In order to reduce VOC emissions from the production and...

              2. BAT 15. In order to reduce VOC emissions in waste gases and...

              3. BAT 16. In order to reduce the energy consumption of the VOC...

            2. 1.1.11.2. NOX and CO emissions

              1. BAT 17. In order to reduce NOX emissions in waste gases while...

            3. 1.1.11.3. Dust emissions

              1. BAT 18. In order to reduce dust emissions in waste gases from...

          12. 1.1.12. Energy efficiency

            1. BAT 19. In order to use energy efficiently, BAT is to use...

          13. 1.1.13. Water use and waste water generation

            1. BAT 20. In order to reduce water consumption and waste water generation...

          14. 1.1.14. Emissions to water

            1. BAT 21. In order to reduce emissions to water and/or to facilitate...

          15. 1.1.15. Waste management

            1. BAT 22. In order to reduce the quantity of waste sent for...

          16. 1.1.16. Odour emissions

            1. BAT 23. In order to prevent or, where that is not practicable,...

              1. Applicability

        2. 1.2. BAT conclusions for the coating of vehicles

          1. 1.2.1. VOC emissions and energy and raw material consumption

            1. BAT 24. In order to reduce the consumption of solvents, other raw...

          2. 1.2.2. Waste quantity sent off site

        3. 1.3. BAT conclusions for the coating of other metal and plastic...

        4. 1.4. BAT conclusions for the coating of ships and yachts

          1. BAT 25. In order to reduce total emissions of VOCs and dust...

        5. 1.5. BAT conclusions for the coating of aircraft

          1. BAT 26: In order to reduce total emissions of VOCs and to...

        6. 1.6. BAT conclusions for coil coating

        7. 1.7. BAT conclusions for the manufacturing of adhesive tapes

        8. 1.8. BAT conclusions for the coating of textiles, foils and paper...

        9. 1.9. BAT conclusions for the manufacturing of winding wire

          1. BAT 27. In order to reduce total emissions of VOCs and energy...

        10. 1.10. BAT conclusions for the coating and printing of metal packaging...

        11. 1.11. BAT conclusions for heatset web offset printing

          1. BAT 28. In order to reduce total VOC emissions, BAT is to...

        12. 1.12. BAT conclusions for flexography and non-publication rotogravure printing

        13. 1.13. BAT conclusions for publication rotogravure printing

          1. BAT 29. In order to reduce VOC emissions from publication rotogravure printing,...

        14. 1.14. BAT conclusions for the coating of wooden surfaces

      6. 2. BAT CONCLUSIONS FOR PRESERVATION OF WOOD AND WOOD PRODUCTS WITH...

        1. 2.1. Environmental management systems

          1. BAT 30. In order to improve the overall environmental performance, BAT is...

            1. Note

            2. Applicability

        2. 2.2. Substitution of harmful/hazardous substances

          1. BAT 31. In order to prevent or reduce emissions of PAHs and/or...

            1. Description

            2. Applicability

          2. BAT 32. In order to reduce the environmental risk posed by the...

            1. Applicability

        3. 2.3. Resource efficiency

          1. BAT 33. In order to increase resource efficiency and to reduce the...

        4. 2.4. Delivery, storage and handling of treatment chemicals

          1. BAT 34. In order to reduce emissions from delivery, storage and handling...

        5. 2.5. Preparation/conditioning of wood

          1. BAT 35. In order to reduce the consumption of treatment chemicals and...

        6. 2.6. Preservative application process

          1. BAT 36. In order to prevent accidental leakage and emissions of treatment...

          2. BAT 37. In order to reduce emissions of aerosols from wood and...

          3. BAT 38. In order to prevent or reduce emissions of treatment chemicals...

          4. BAT 39. In order to reduce energy consumption in pressure processes (autoclaves),...

            1. Description

            2. Applicability

        7. 2.7. Post-treatment conditioning and interim storage

          1. BAT 40. In order to prevent or reduce the contamination of soil...

            1. Description

        8. 2.8. Waste management

          1. BAT 41. In order to reduce the quantity of waste sent for...

          2. BAT 42. In order to reduce the environmental risk related to waste...

        9. 2.9. Monitoring

          1. 2.9.1. Emissions to water

            1. BAT 43. BAT is to monitor pollutants in waste water and potentially...

          2. 2.9.2. Groundwater quality

            1. BAT 44. BAT is to monitor pollutants in groundwater with a frequency...

          3. 2.9.3. Emissions in waste gases

            1. BAT 45. BAT is to monitor emissions in waste gases with a...

        10. 2.10. Emissions to soil and groundwater

          1. BAT 46. In order to prevent or reduce emissions to soil and...

        11. 2.11. Emissions to water and waste water management

          1. BAT 47. In order to prevent or, where that is not practicable,...

          2. BAT 48. In order to reduce emissions to water from wood and...

            1. Description:

        12. 2.12. Emissions to air

          1. BAT 49. In order to reduce emissions of VOCs to air from...

          2. BAT 50. In order to reduce emissions of organic compounds and odour...

            1. Applicability

          3. BAT 51. In order to reduce emissions of organic compounds to air...

          4. BAT 52. In order to reduce NOX emissions in waste gases while...

        13. 2.13. Noise

          1. BAT 53. In order to prevent or, where that is not practicable,...

            1. Applicability

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As adopted by EU): The original version of the legislation as it stood when it was first adopted in the EU. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the EU Official Journal
  • lists of changes made by and/or affecting this legislation item
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different versions taken from EUR-Lex before exit day and during the implementation period as well as any subsequent versions created after the implementation period as a result of changes made by UK legislation.

The dates for the EU versions are taken from the document dates on EUR-Lex and may not always coincide with when the changes came into force for the document.

For any versions created after the implementation period as a result of changes made by UK legislation the date will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. For further information see our guide to revised legislation on Understanding Legislation.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as adopted version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources