http://www.legislation.gov.uk/eudn/2020/1339/article/2Commission Implementing Decision (EU) 2020/1339 of 23 September 2020 on the approval pursuant to Regulation (EU) 2019/631 of the European Parliament and of the Council of efficient vehicle exterior lighting using light emitting diodes as an innovative technology for reducing CO2 emissions from certain light commercial vehicles in relation to the Worldwide Harmonised Light Vehicle Test Procedure (Text with EEA relevance)Commission Implementing Decision (EU) 2020/1339Commission Implementing Decision (EU) 2020/1339 of 23 September 2020 on the approval pursuant to Regulation (EU) 2019/631 of the European Parliament and of the Council of efficient vehicle exterior lighting using light emitting diodes as an innovative technology for reducing CO2 emissions from certain light commercial vehicles in relation to the Worldwide Harmonised Light Vehicle Test Procedure (Text with EEA relevance)King's Printer of Acts of Parliamenthttps://webarchive.nationalarchives.gov.uk/eu-exit/https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:02020D1339-20201124texttext/xmlen2025-01-08Expert Participation2022-12-31 Application for certification of CO<Inferior>2</Inferior> savings Article 2 1 A manufacturer may apply to a type-approval authority for certification of the CO2 savings from the use of one or several efficient exterior LED lights by reference to this Decision. 2 The manufacturer shall ensure that the application for the certification is accompanied by a verification report from an independent and certified body confirming that the conditions set out in Article 1 have been met. 3 Where the savings have been certified in accordance with Article 3, the manufacturer shall ensure that the certified CO2 savings and the eco-innovation code referred to in Article 4(1) are recorded in the certificate of conformity of the vehicles concerned.