Commission Implementing Decision (EU) 2017/322

of 22 February 2017

concerning exemptions from the extended anti-dumping duty on certain bicycle parts originating in the People's Republic of China pursuant to Commission Regulation (EC) No 88/97

(notified under document C(2017) 1129)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EU) 2016/1036 of the European Parliament and of the Council of 8 June 2016 on protection against dumped imports from countries not members of the European Union1 (‘the basic Regulation’), and in particular Article 13(4) thereof,
Having regard to Council Regulation (EC) No 71/97 of 10 January 1997 extending the definitive anti-dumping duty imposed by Regulation (EEC) No 2474/93 on bicycles originating in the People's Republic of China to imports of certain bicycle parts from the People's Republic of China, and levying the extended duty on such imports registered under Regulation (EC) No 703/962, and in particular Article 3 thereof,
Having regard to Commission Regulation (EC) No 88/97 of 20 January 1997 on the authorisation of the exemption of imports of certain bicycle parts originating in the People's Republic of China from the extension by Council Regulation (EC) No 71/97 of the anti-dumping duty imposed by Council Regulation (EEC) No 2474/933, and in particular Articles 4 to 7 thereof,

After informing the Member States,

Whereas:

(1)

An anti-dumping duty currently applies on imports into the European Union of essential bicycle parts originating in the People's Republic of China (‘the extended duty’) as a result of the extension by Regulation (EC) No 71/97 (‘the extending Regulation’) of the anti-dumping duty on imports of bicycles originating in the People's Republic of China (‘China’).

(2)

Under Article 3 of the extending Regulation, the European Commission (‘the Commission’) is empowered to adopt the necessary measures to authorise the exemption of imports of essential bicycle parts which do not circumvent the anti-dumping duty.

(3)

Those implementing measures are set forth in Regulation (EC) No 88/97 (‘the exemption Regulation’) establishing the specific exemption system.

(4)

On this basis the Commission has exempted a number of bicycle assemblers from the extended duty (‘the exempted parties’).

(5)
As provided for in Article 16(2) of the exemption Regulation, the Commission has published in the Official Journal of the European Union successive lists of the exempted parties4.
(6)
The most recent Commission Implementing Decision concerning exemptions under the exemption Regulation was adopted on 15 December 20155.
1.REQUESTS FOR EXEMPTION
(7)

The Commission received from the parties listed in Tables 1 to 3 below requests for exemption with all the information required to determine that these were admissible in accordance with Article 4(1) of the exemption Regulation.

(8)

These parties were given an opportunity to comment on the Commission's conclusions as to the admissibility of their requests.

(9)

In accordance with Article 5(1) of the exemption Regulation pending a decision on the merits of requests from these parties the payment of the extended duty in respect of any imports of essential bicycle parts declared for free circulation by these parties was suspended as from the day on which the Commission received their requests.

2.AUTHORISATION OF EXEMPTIONS
(10)The examination of the merits of the requests from the parties listed in Table 1 has been concluded.
Table 1

TARIC additional code

Name

Address

B963

PANEX DINAMIC d.o.o.

Dr Tome Bratkovića 1, HR-40000 Čakovec, Croatia

C001

CICLI EUROPA s.r.l.

34 Via portella Bifuto, IT-93017 San Cataldo (CL), Italy

C002

OLYMPIQUE SARL

ZA Les Epalits, FR-42610 Saint-Romain-le-Puy, France

C021

Kuisle & Kuisle GmbH

Füssener Straße 22 a, DE-87675 Stötten, Germany

B960

In Cycles — Montagem e Comércio de Bicicletas Lda.

Zona Industrial De Barrô Norte/Sul, N.o 976, Fracçao A/B e D, AP. 52, PT-3750-353 Barrô Águeda, Portugal

C053

Firma Handlowo-Usługowo-Produkcyjna ‘Trans-Rower’ Roman Tylec

Dąbie 47, PL-39-311 Zdziarzec, Poland

(11)

The Commission established during this examination that the value of the parts originating in China constituted less than 60 % of the total value of the parts of the bicycles assembled by these parties.

(12)

Consequently, their assembly operations fall outside the scope of Article 13(2) of the basic Regulation.

(13)

For that reason, and in accordance with Article 7(1) of the exemption Regulation, the parties listed in Table 1 should be exempted from the extended duty.

(14)

In accordance with Article 7(2), their exemptions should take effect as from the date of receipt of their requests and, in addition, their customs debts in respect of the extended duty should be considered void from the same date.

(15)

These parties were informed of the Commission's conclusions on the merits of their requests and were given an opportunity to comment thereon.

(16)
Since the exemptions apply only to the parties specifically referred to in Table 1 with their names and addresses, the exempted parties should notify the Commission6 forthwith, of any changes to these (for instance, following a change in the name, legal form or address or following the setting up of new assembly entities).
(17)

In such case, the party should provide all relevant information, in particular on any modification in its activities linked to assembly operations. Where appropriate, the Commission will update the references to such party.

3.UPDATE OF REFERENCES TO EXEMPTED PARTIES
(18)

The exempted parties listed in Table 2 notified the Commission on changes in their references (names legal forms or addresses). The Commission, after having examined the information submitted, concluded that those changes in no way affect the assembly operations with regard to the conditions of exemption set forth in the exemption Regulation.

(19)While the exemption of these parties from the extended duty authorised in accordance with Article 7(1) of the exemption Regulation remain unaffected, the references to these parties should be updated.
Table 2

TARIC additional code

Former reference

Change

A662

Credat Industries a.s.,

V. Palkovicha 19

SK-946 03 Kolárovo, Slovakia

The company's address has been changed to:

‘Priemyselný areál 3415

SK-946 03 Kolárovo, Slovakia’

A247

AT Zweirad GmbH,

Boschstrasse 18, DE-48341 Altenberge, Germany

The company's address has been changed to:

‘Zur Steinkuhle 2, DE-48341 Altenberge, Germany’

A995

Planet X Ltd,

Unit 6, Ignite Business Park, Magna Way, Rotherham GB-S60 1FD, United Kingdom

The company's address has been changed to:

‘Unit 38-41, Aldwarke Wharfe Business Park, Waddington Way, Rotherham, South Yorkshire GB-S65 3SH, United Kingdom’

A542

Biuro Ekonomiczno-Handlowe Jan Zasada,

ul. Fabryczna 6, PL-98-300 Wieluń, Poland

The company's name and legal form has been changed to:

‘Biuro Ekonomiczno-Handlowe Jan Zasada Sp. z o.o.’

8983

Mara Cicli SRL,

Via della Pergola 5, IT-21052 Busto Arsizio (VA), Italy

The company's name, legal form and address have been changed to:

‘Mandelli SPA

Via Tommaso Grossi 5, IT-20841 Carate Brianza (MB), Italy’

A605

Bohemia Bike a.s.,

Okružní 697, CZ-370 01 České Budějovice, Czech Republic

The company's address has been changed to

‘Na Pankráci 1724/129 Nusle

CZ-140 00 Praha 4,

Czech Republic’

4.SUSPENSION OF PAYMENTS OF THE DUTIES FOR PARTIES UNDER EXAMINATION
(20)

The examination of the merits of the request from the parties listed in Table 3 is ongoing. Pending a decision on the merits of their requests the payment of extended duty by these parties is suspended.

(21)
Since the suspensions apply only to the parties specifically referred to in Table 3 with their names and addresses, these parties should notify the Commission7 forthwith, of any changes to these (for instance following a change in the name, legal form or address or following the setting up of new assembly entities).
(22)In such case, the party should provide all relevant information, in particular on any modification in its activities linked to assembly operations. Where appropriate, the Commission will update the references to such party,
Table 3

TARIC additional code

Name

Address

C003

Interbike Spółka z o.o.

ul. Śląska 6/5, PL-42-200 Częstochowa, Poland

C049

Cycles Sport North Ltd

363 Leach Place, Walton Summit Centre, Preston, GB-PR5 8AS, United Kingdom

C170

Hermann Hartje KG

Deichstrasse 120-122, DE-27318 Hoya, Germany

C102

Uno Bike B.V.

Bovendijk 213, NL-3045 PD Rotterdam, Netherlands

C128

VELOSPRINT S

Trnavská 40, SK-949 01 Nitra, Slovakia

C169

Pelago MFG oy

Tyynenmerenkatu 6 L3, FI-00220 Helsinki, Finland

C202

VANMOOF B.V.

Mauritskade 55, NL-1092 AD Amsterdam, Netherlands

HAS ADOPTED THIS DECISION: