THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity, and in particular Article 5(3) thereof,
Having regard to the opinion of the Telecommunication Conformity Assessment and Market Surveillance Committee (TCAM), established by Article 13 of Directive 1999/5/EC,
Whereas:
(1)
Where a national standard transposing a harmonised standard, the reference of which has been published in the Official Journal of the European Union, covers one or more elements of the essential requirements referred to in Article 3 of Directive 1999/5/EC, a radio equipment, built in accordance with this standard is presumed to meet the essential requirements concerned.
(2)
In July 2014, France lodged an objection in respect of standard EN 50566:2013 on requirements to demonstrate compliance of radio frequency fields from handheld and body-mounted wireless communication devices used by the general public (30 MHz-6 GHz).
(3)
France considers this standard should be reviewed to better take into account the conditions of use of mobile phones as well as other portable devices (such as tablets) and therefore provide conditions for the distance at which the body SAR (Specific Absorption Rate) is to be assessed.
(4)
Having examined the standard EN 50566:2013 together with the representatives of the Telecommunication Conformity Assessment and Market Surveillance Committee (TCAM), the Commission concluded that the standard fails to meet the essential requirements referred to in Article 3(1)(a) of Directive 1999/5/EC. Article 3(1)(a) of Directive 1999/5/EC refers to the objectives with respect to safety requirements contained in Directive 2006/95/EC of the European Parliament and of the Council. Point 1(d) of Annex I to Directive 2006/95/EC lays down that ‘the electrical equipment should be so designed and manufactured as to ensure that protection against the hazards set out in points 2 and 3 of this Annex is assured, providing that the equipment is used in applications for which it was made and is adequately maintained’. Point 2 of the same Annex lays down that ‘Measures of a technical nature should be prescribed in accordance with point 1, in order to ensure: (a) that persons and domestic animals are adequately protected against the danger of physical injury or other harm which might be caused by direct or indirect contact’ and ‘(c) that persons, domestic animals and property are adequately protected against non-electrical dangers caused by the electrical equipment which are revealed by experience’.
(5)
Taking into consideration the abovementioned safety aspects of standard EN 50566:2013 to be improved and pending a suitable revision of that standard, the publication in the Official Journal of the European Union of the reference of the standard EN 50566:2013 should be accompanied by an appropriate warning,
HAS ADOPTED THIS DECISION: