The application refers to an efficient exterior lighting system including low-beam headlamp, high-beam headlamp, front position, front fog, rear fog, front turn signal, rear turn signal, licence plate and reversing lamps fitted with LEDs..

The Commission finds that the information provided in the application demonstrates that the conditions and criteria referred to in Article 12 of Regulation (EC) No 443/2009 and in Articles 2 and 4 of Implementing Regulation (EU) No 725/2011 have been met.

The applicant has demonstrated that the use of the LEDs in the in the low-beam headlamp, the high-beam headlamp, the front position, front fog lamp, rear fog lamp, front turn signal, rear turn signal, licence plate and reversing lamp did not exceed 3 % of the new passenger cars registered in the reference year 2009. In support of this the applicant has referred to the Technical Guidelines, which provides for the summary of the CLEPA Light Sight Safety report. The applicant has used predefined functions and averaged data in line with the simplified approach specified in the Technical Guidelines (version February 2013).

The applicant has in accordance with the simplified approach described in the Technical Guidelines used halogen lighting as baseline technology for demonstrating the CO₂-reducing capacity of the efficient exterior lighting system with the use of LEDs in the low-beam headlamp, the high-beam headlamp, the front position, front fog lamp, rear fog lamp, front turn signal, rear turn signal, licence plate and reversing lamp.

The applicant has provided a methodology for testing the CO₂ reductions which includes formulae that are consistent with the formulae described in the Technical Guidelines for the simplified approach with regard to lighting functions. The Commission considers that the testing methodology will provide testing results that are verifiable, repeatable and comparable and that it is capable of demonstrating in a realistic manner the CO₂ emissions benefits of the innovative technology with strong statistical significance in accordance with Article 6 of Implementing Regulation (EU) No 725/2011.

Against that background the Commission finds that the applicant has demonstrated satisfactorily that the emission reduction achieved by the efficient exterior lighting system including the low-beam headlamp, high-beam headlamp, front position lamp, front fog lamp, rear fog lamp and licence plate lamp is at least 1 gCO₂/km. It should therefore also be concluded that an efficient exterior lighting system including not only those lamps but also the front turn signal, rear turn signal and the reversing lamps fitted with LEDs or another appropriate combination of those lamps could achieve a CO₂ reduction of at least 1 gCO₂/km.

The activation of the lighting functions concerned is mandatory to ensure the safe operation of the vehicle and as a consequence not dependent on the choice of the driver. On that basis the Commission finds that the manufacturer should be considered accountable for the CO₂ emission reduction due to the use of the innovative technology.

The Commission finds that the verification report has been prepared by Vehicles Certification Agency which is an independent and certified body and that the report supports the findings set out in the application.

Against that background, the Commission finds that no objections should be raised as regards the approval of the innovative technology in question.

Any manufacturer wishing to benefit from a reduction of its average specific CO₂ emissions for the purpose of meeting its specific emissions target by means of the CO₂ savings from the use of the innovative technology approved by this Decision, should in accordance with Article 11(1) of Implementing Regulation (EU) No 725/2011, refer to this Decision in its application for an EC type-approval certificate for the vehicles concerned.