http://www.legislation.gov.uk/eudn/2014/871Council Decision of 1 December 2014 on the position to be taken, on behalf of the European Union, at the Eighth Conference of the Parties to the Convention on the Transboundary Effects of Industrial Accidents with regard to the proposal for an amendment of Annex I to that Convention (2014/871/EU)Council Decision of 1 December 2014 on the position to be taken, on behalf of the European Union, at the Eighth Conference of the Parties to the Convention on the Transboundary Effects of Industrial Accidents with regard to the proposal for an amendment of Annex I to that Convention (2014/871/EU)2021-02-16King's Printer of Acts of Parliamenthttps://webarchive.nationalarchives.gov.uk/eu-exit/https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014D0871texttext/xmlen2014-12-01

Council Decision

of 1 December 2014

on the position to be taken, on behalf of the European Union, at the Eighth Conference of the Parties to the Convention on the Transboundary Effects of Industrial Accidents with regard to the proposal for an amendment of Annex I to that Convention

(2014/871/EU)

THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty on the Functioning of the European Union, and in particular Article 192(1) in conjunction with Article 218(9) thereof,

Having regard to the proposal from the European Commission,

Whereas:

(1)

The Union is a Party to the Convention on the Transboundary Effects of Industrial Accidents done at Helsinki on 17 March 1992

OJ L 326, 3.12.1998, p. 5.

(‘the Convention’).

(2)

Annex I to the Convention contains categories and named hazardous substances for the purpose of defining hazardous activities.

(3)

In accordance with Article 26(4) of the Convention, any amendment to Annex I to the Convention shall become effective, for those Parties to the Convention which have not notified their objection, 12 months after its communication to the Parties by the Executive Secretary upon its adoption at the Conference of the Parties by a nine-tenths majority of the Parties present and voting at the meeting, provided that at least sixteen Parties have not notified objections.

(4)

The text of the proposal for an amendment to Annex I to the Convention was agreed within the Working Group on the Development of the Convention, endorsed by the Bureau of the Convention, and will be proposed for adoption at the Eighth Conference of the Parties taking place in Geneva from 3 to 5 December 2014.

(5)

The amendment to Annex I to the Convention would fully align that Annex to Annex I to Directive 2012/18/EU of the European Parliament and of the Council

Directive 2012/18/EU of the European Parliament and of the Council of 4 July 2012 on the control of major-accident hazards involving dangerous substances, amending and subsequently repealing Council Directive 96/82/EC (OJ L 197, 24.7.2012, p. 1).

(6)

The amendment to Annex I to the Convention should therefore be approved.

(7)

At the time of the conclusion of the Convention, the Union made reservations concerning the application of the Convention in accordance with the Community's internal rules. Those reservations were based on discrepancies between Annex I to the Convention and the Union legislation in force. Those discrepancies will no longer exist after Annex I to the Convention has been amended. Those reservations should, therefore, be lifted once the amendment to Annex I to the Convention has become effective,

HAS ADOPTED THIS DECISION:

Article 1

The position to be taken on the Union's behalf at the Eighth Conference of the Parties to the Convention on the Transboundary Effects of Industrial Accidents shall be to support, in substance, the proposed amendment of Annex I to the Convention including the corrigendum thereto as attached to this Decision.

Article 2

The President of the Council is hereby authorised to designate the person(s) empowered to withdraw on behalf of the Union the remaining reservations made pursuant to Decision 98/685/EC

Council Decision 98/685/EC of 23 March 1998 concerning the conclusion of the Convention on the Transboundary Effects of Industrial Accidents (OJ L 326, 3.12.1998, p. 1).

subject to the amendment to Annex I to the Convention referred to in Article 1 of this Decision becoming effective pursuant to Article 26(4) of the Convention.

Article 3

This Decision shall enter into force on the date of its adoption.

Done at Brussels, 1 December 2014.

For the Council

The President

B. Lorenzin

DRAFT DECISION AMENDING ANNEX I TO THE CONVENTION

Submitted by the Working Group on the Development of the Convention

The Conference of the Parties,

Recognizing the need to update the categories of substances and mixtures and the named substances and their threshold quantities, as contained in annex I to the Convention on the Transboundary Effects of Industrial Accidents, for the purposes of introducing the criteria of the United Nations Globally Harmonized System of Classification and Labelling of Chemicals (ST/SG/AC.10/30/Rev.4) and of maintaining consistency with the corresponding European Union legislation,

Bearing in mind its decision to undertake a revision of the hazardous substances and their quantities as contained in annex I and its decision 2004/4 on establishing the Working Group on the Development of the Convention,

Acknowledging the proposal to amend annex I, drawn up by the Working Group on the basis of a thorough review,

Amends annex I to the Convention on hazardous substances for the purposes of defining hazardous activities by replacing it with the text set out in the annex to this decision.

ANNEXHAZARDOUS SUBSTANCES FOR THE PURPOSES OF DEFINING HAZARDOUS ACTIVITIES

Criteria according the United Nations Globally Harmonized System (GHS) of Classification and Labelling of Chemicals (ST/SG/AC.10/30/Rev.4). Parties should use these criteria when classifying substances or mixtures for the purposes of Part I of this annex, unless other legally binding criteria have been adopted in the national legislation. Mixtures shall be treated in the same way as the pure substance, provided they remain within concentration limits set according to their properties in accordance with the GHS unless a percentage composition or other description is specifically given.

Where a substance or mixture named in Part II also falls within one or more categories in Part I, the threshold quantity given in Part II shall be used.

For the identification of hazardous activities, Parties shall take into consideration the actual or anticipated hazardous properties and/or quantities of all hazardous substances present or of hazardous substances which it is reasonable to foresee may be generated during loss of control of an activity, including storage activities, within a hazardous activity.

Category in accordance with the United Nations Globally Harmonized System (GHS) of Classification and Labelling of Chemicals	Threshold quantity(metric tons)
Part I.
Categories of substances and mixtures not specifically named in Part II
1. Acute toxic, Category 1, all exposure routes According to the criteria in chapters 3.1.2 and 3.1.3 of GHS.	20
2.Acute toxic: Category 2, all exposure routes According to the criteria in chapters 3.1.2 and 3.1.3 of GHS. Category 3, inhalation exposure route Substances that fall within acute toxic Category 3 via the oral route shall fall under entry 2 acute toxic in those cases where neither acute inhalation toxicity classification nor acute dermal toxicity classification can be derived, for example due to lack of conclusive inhalation and dermal toxicity data.	200
3. Specific Target Organ Toxicity (STOT) — Single Exposure (SE) STOT, Category 1 Substances that have produced significant toxicity in humans, or that, on the basis of evidence from studies in experimental animals can be presumed to have the potential to produce significant toxicity in humans following single exposure. Further guidance is given in figure 3.8.1. and table 3.8.1 of part 3 of GHS.	200
4. Explosives — unstable explosives or explosives, where the substance, mixture or article falls under Division 1.1, 1.2, 1.3, 1.5 or 1.6 of Chapter 2.1.2 of the GHS criteria or substances or mixtures having explosive properties according to Test series 2 of Part I of the UN Recommendations on the Transport of Dangerous Goods: Manual of Tests and Criteria (Manual of Tests and Criteria) and do not belong to the hazard classes Organic peroxides or Self-reactive substances and mixtures Testing for explosive properties of substances and mixtures is only necessary if the screening procedure according to appendix 6, part 3, of the Manual of Tests and Criteria identifies the substance or mixture as potentially having explosive properties. The hazard class Explosives includes explosive articles. If the quantity of the explosive substance or mixture contained in the article is known, that quantity shall be considered for the purposes of this Convention. If the quantity of the explosive substance or mixture contained in the article is not known, then, for the purposes of this Convention, the whole article shall be treated as explosive.	50
5. Explosives, where the substance, mixture or article falls under Division 1.4 of Chapter 2.1.2 of the GHS If Explosives of division 1.4 are unpacked or repacked, they shall be assigned to the entry 4 (Explosive), unless the hazard is shown to still correspond to Division 1.4, in accordance with GHS.	200
6. Flammable gases, Category 1 or 2 According to the criteria in chapter 2.2.2 of GHS.	50
7. Aerosols Aerosols are classified according to the criteria in Chapter 2.3 of GHS and the Manual of Tests and Criteria, Part III, section 31 referred to therein. , Category 1 or 2, containing flammable gases Category 1 or 2 or flammable liquids Category 1	500 (net)
8. Aerosols, Category 1 or 2, not containing flammable gases Category 1 or 2 nor flammable liquids Category 1 In order to use this entry, it must be documented that the aerosol dispenser does not contain flammable gas Category 1 or 2 nor flammable liquid Category 1.	50 000 (net)
9. Oxidizing gases, category 1 According to the criteria in chapter 2.4.2 of GHS.	200
10.Flammable liquids: Flammable liquids, Category 1, or Flammable liquids, Category 2 or 3, maintained at a temperature above their boiling point According to the criteria in chapter 2.4.2 of GHS. , or Other liquids with a flash point ≤ 60 °C, maintained at a temperature above their boiling point Liquids with a flash point of more than 35 °C may be regarded as non-flammable liquids for some regulatory purposes (e.g. transport) if negative results have been obtained in sustained combustibility test L.2, in part III, section 32 of the Manual of Tests and Criteria. This is, however, not valid under elevated conditions such as high temperature or pressure, and therefore such liquids are included in this entry.	50
11.Flammable liquids: Flammable liquids, Category 2 or 3, where particular processing conditions, such as high pressure or high temperature, may create industrial accident hazards According to the criteria in chapter 2.4.2 of GHS. , or Other liquids with a flash point ≤ 60 °C where particular processing conditions, such as high pressure or high temperature, may create industrial accident hazards	200
12. Flammable liquids, Categories 2 or 3, not covered by 10 and 11 According to the criteria in chapter 2.4.2 of GHS.	50 000
13.Self-reactive substances and mixtures and organic peroxides: Self-reactive substances and mixtures, Type A or B or Organic peroxides, Type A or B According to the criteria in chapters 2.8.2 and 2.15.2.2 of GHS.	50
14.Self-reactive substances and mixtures and organic peroxides: Self-reactive substances and mixtures, Type C, D, E or F or Organic peroxides, Type C, D, E, or F According to the criteria in chapters 2.8.2 and 2.15.2.2 of GHS.	200
15. Pyrophoric liquids and solids, Category 1	200
16. Oxidizing liquids and solids, Category 1, 2 or 3	200
17. Hazardous to the aquatic environment, Category Acute 1 or Chronic 1 According to the criteria in chapter 4.1.2 of GHS.	200
18. Hazardous to the aquatic environment, Category Chronic 2 According to the criteria in chapter 4.1.2 of GHS.	500
19. Substances and mixtures which react violently with water, such as acetyl chloride, titanium tetrachloride	500
20. Substances and mixtures which in contact with water emit flammable gases, Category 1 According to the criteria in chapter 2.12.2 of GHS.	500
21. Substances and mixtures which in contact with water liberate toxic gas (substances and mixtures which in contact with water or damp air, evolve gases classified for acute toxicity in category 1, 2 or 3, such as aluminium phosphide, phosphorus pentasulphide)	200

Part II.

Named substances

Substance

Threshold quantity(metric tons)

1a.

Ammonium nitrate

Ammonium nitrate (10 000): fertilizers capable of self-sustaining decomposition.

This applies to ammonium nitrate–based compound/composite fertilizers (compound/composite fertilizers containing ammonium nitrate with phosphate and/or potash), which are capable of self-sustaining decomposition according to the Trough Test (see Manual of Tests and Criteria, part III, subsection 38.2), and in which the nitrogen content as a result of ammonium nitrate is:

(a)

between 15,75 % and–24,5 % by weight (15,75 % and 24,5 % nitrogen content by weight as a result of ammonium nitrate correspond to 45 % and 70 % ammonium nitrate, respectively) and which either contain not more 0,4 % total combustible/organic materials or fulfil the requirements of an appropriate test of resistance to detonation (e.g., 4-inch-steel-tube test);

(b)

15,75 % by weight or less and unrestricted combustible materials.

10 000

1b.

Ammonium nitrate

Ammonium nitrate (5 000): fertilizer grade.

This applies to straight ammonium nitrate-based fertilizers and to ammonium nitrate-based compound/composite fertilizers in which the nitrogen content as a result of ammonium nitrate is:

(a)

more than 24,5 % by weight, except for mixtures of straight ammonium nitrate-based fertilizers with dolomite, limestone and/or calcium carbonate with a purity of at least 90 %;

(b)

more than 15,75 % by weight for mixtures of ammonium nitrate and ammonium sulphate;

(c)

more than 28 % (28 % nitrogen content by weight as a result of ammonium nitrate corresponds to 80 % ammonium nitrate) by weight for mixtures of straight ammonium nitrate-based fertilizers with dolomite, limestone and/or calcium carbonate with a purity of at least 90 % and which fulfil the requirements of an appropriate test of resistance to detonation (e.g., 4-inch-steel-tube test).

5 000

1c.

Ammonium nitrate

Ammonium nitrate (2 500): technical grade.

This applies to:

(a)

Ammonium nitrate and mixtures of ammonium nitrate in which the nitrogen content as a result of ammonium nitrate is:

(i)

Between 24,5 % and–28 % by weight and which contain not more than 0,4 % combustible substances;

(ii)

More than 28 % by weight, and which contain not more than 0,2 % combustible substances;

(b)

Aqueous ammonium nitrate solutions in which the concentration of ammonium nitrate is more than 80 % by weight.

2 500

1d.

Ammonium nitrate

Ammonium nitrate (50): ‘off-specs’ material and fertilizers not fulfilling the requirements of an appropriate test of resistance to detonation (e.g., 4-inch-steel-tube test).

This applies to:

(a)

Material rejected during the manufacturing process and to ammonium nitrate and mixtures of ammonium nitrate, straight ammonium nitrate-based fertilizers and ammonium nitrate-based compound/composite fertilizers referred to in notes 23 and 24 that are being or have been returned from the final user to a manufacturer, temporary storage or reprocessing plant for reworking, recycling or treatment for safe use because they no longer comply with the specifications in notes 23 and 24;

(b)

Fertilizers referred to in note 22(a) and note 23 which do not fulfil the requirements of an appropriate test of resistance to detonation (e.g., 4-inch-steel-tube test).

2a.

Potassium nitrate

Potassium nitrate (10 000): composite potassium nitrate-based fertilizers (in prilled/granular form) which have the same properties as pure potassium nitrate.

10 000

2b.

Potassium nitrate

Potassium nitrate (5 000): composite potassium nitrate-based fertilizers (in crystalline form) which have the same hazardous properties as pure potassium nitrate.

5 000

Arsenic pentoxide, arsenic (V) acid and/or salts

Arsenic trioxide, arsenious (III) acid and/or salts

0,1

Bromine

100

Chlorine

Nickel compounds in inhalable powder form: nickel monoxide, nickel dioxide, nickel sulphide, trinickel disulphide, dinickel trioxide

Ethyleneimine

Fluorine

10.

Formaldehyde (concentration ≥ 90 %)

11.

Hydrogen

12.

Hydrogen chloride (liquefied gas)

250

13.

Lead alkyls

14.

Liquefied flammable gases, Category 1 or 2 (including liquefied petroleum gas) and natural gas

Upgraded biogas: for the purpose of the implementation of the Convention, upgraded biogas may be classified under entry 14 of Part 2 of annex I where it has been processed in accordance with applicable standards for purified and upgraded biogas ensuring a quality equivalent to that of natural gas, including the content of methane, and which has a maximum of 1 % oxygen.

200

15.

Acetylene

16.

Ethylene oxide

17.

Propylene oxide

18.

Methanol

5 000

19.

4, 4′-Methylene bis (2-chloraniline) and/or salts, in powder form

0,01

20.

Methyl isocyanate

0,15

21.

Oxygen

2 000

22.

Toluene diisocyanate (2,4 -Toluene diisocyanate and 2,6 -Toluene diisocyanate)

100

23.

Carbonyl dichloride (phosgene)

0,75

24.

Arsine (arsenic trihydride)

25.

Phosphine (phosphorus trihydride)

26.

Sulphur dichloride

27.

Sulphur trioxide

28.

Polychlorodibenzofurans and polychlorodibenzodioxins (including tetrachlorodibenzodioxin (TCDD)), calculated in TCDD equivalent

Polychlorodibenzofurans and polychlorodibenzodioxins.

The quantities of polychlorodibenzofurans and polychlorodibenzodioxins are calculated using the following World Health Organization (WHO) human and mammalian toxic equivalency factors for dioxins and dioxin-like compounds (TEF) as re-evaluated in 2005:

WHO 2005 TEF

Dioxins	TEF	Furans	TEF
2,3,7,8-TCDD	1	2,3,7,8-TCDF	0,1
1,2,3,7,8-PeCDD	1	2,3,4,7,8-PeCDF	0,3
1,2,3,4,7,8-HxCDD	0,1	1,2,3,7,8-PeCDF	0,03
1,2,3,6,7,8-HxCDD	0,1	1,2,3,4,7,8-HxCDF	0,1
1,2,3,7,8,9-HxCDD	0,1	1,2,3,7,8,9-HxCDF	0,1
1,2,3,4,6,7,8-HpCDD	0,01	2,3,4,6,7,8-HxCDF	0,1
OCDD	0,0003	1,2,3,7,8,9-HxCDF	0,1
		1,2,3,4,6,7,8-HpCDF	0,01
		1,2,3,4,7,8,9-HpCDF	0,01
		OCDF	0,0003
Abbreviations: Hx = hexa, Hp = hepta, O = octa, P = penta, T = tetra.
Reference: Martin Van den Berg and others, The 2005 World Health Organization Re-evaluation of Human and Mammalian Toxic Equivalency Factors for Dioxins and Dioxin-like Compounds, Toxicological Sciences, vol. 93, No 2 (October 2006), pp. 223-241 (2006).

0,001

29.The following carcinogens or the mixtures containing the following carcinogens at concentrations above 5 % by weight:

4-Aminobiphenyl and/or its salts, Benzotrichloride, Benzidine and/or salts, Bis (chloromethyl) ether, Chloromethyl methyl ether, 1,2-Dibromoethane, Diethyl sulphate, Dimethyl sulphate, Dimethylcarbamoyl chloride, 1,2-Dibromo-3-chloropropane, 1,2-Dimethylhydrazine, Dimethylnitrosamine, Hexamethylphosphorictriamide, Hydrazine, 2- Naphthylamine and/or salts, 4-Nitrodiphenyl, and 1,3 Propanesultone

30.Petroleum products and alternative fuels:(a)

Gasolines and naphthas;

(b)

Kerosenes (including jet fuels);

(c)

Gas oils (including diesel fuels, home heating oils and gas oil blending streams);

(d)

Heavy fuel oils;

(e)

Alternative fuels serving the same purposes and with similar properties as regards flammability and environmental hazards as the products referred to in points (a) to (d)

25 000

31.

Anhydrous ammonia

200

32.

Boron trifluoride

33.

Hydrogen sulphide

34.

Piperidine

200

35.

Bis(2-dimethylaminoethyl) (methyl)amin

200

36.

3-(2-Ethylhexyloxy)propylamin

200

37.

Mixtures of sodium hypochlorite classified as Aquatic Acute Category 1 [H400] containing < than 5 % active chlorine and not classified under any of the other hazard categories in Part 1 of annex I.

Provided that the mixture in the absence of sodium hypochlorite would not be classified as aquatic acute, Category 1.

500

38.

Propylamine

In cases where this dangerous substance falls within the category 10 flammable liquids or 11 flammable liquids, for the purposes of the Convention the lowest qualifying quantities shall apply.

2 000

39.

Tert-butyl acrylate

500

40.

2-Methyl-3-butenenitrile

2 000

41.

Tetrahydro-3,5-dimethyl-1,3,5,-thiadiazine-2-thione (dazomet)

200

42.

Methyl acrylate

2 000

43.

Methylpyridine

2 000

44.

Bromo-3-chloropropane

2 000

Notes:

Corrigendum1.Annex, Part I, item 8

For Aerosols read Aerosols (¹⁰)

2.Annex, Part I, item 11, last line

For industrial accident hazards read industrial accident hazards (¹⁴)

3.Annex, Part II, item 43

For Methylpyridine (³¹) read 3-Methylpyridine (³¹)

4.Annex, Notes 13, 15 and 16

For chapter 2.4.2 read chapter 2.6.2