The specific assessment and verification requirements are indicated within each criterion.

Where the applicant is required to provide declarations, documentation, analyses test reports, or other evidence to show compliance with the criteria, it is understood that these may originate from the applicant and/or his supplier(s) and/or their supplier(s), et cetera as appropriate.

Where possible, the testing should be performed by laboratories that meet the general requirements of EN ISO 17025 or equivalent.

Where appropriate, test methods other than those indicated for each criterion may be used if the competent body assessing the application accepts their equivalence.

Appendix I makes reference to the detergent ingredient database (DID list) which contains the most widely used ingredients used in detergent formulations. It shall be used for deriving the data for the calculations of the Critical Dilution Volume (CDV) and for the assessment of the biodegradability of the ingredients. For substances not present on the DID list, guidance is given on how to calculate or extrapolate the relevant data. The latest version of the DID list is available from the EU Ecolabel website or via the websites of the individual competent bodies.

Where appropriate, competent bodies may require supporting documentation and may carry out independent verifications.

Constituent substances the concentration of which exceeds 0,010 % by weight of the preparation shall comply with the ecological criteria.

For preservatives, colouring agents and fragrance compliance with the criteria is required regardless of their concentration except for criterion 4(b) on excluded or limited substances and mixtures.

Ingoing substances are defined as all substances in the product including additives (e.g. preservatives or stabilisers) in the ingredients. Impurities resulting from the raw material production, which are present in concentrations > 0,010 % by weight of the final formulation shall also comply with the criteria.

Where the dosage instruction on the package has specifications for both prewash and subsequent wash (in addition to a normal, single wash), the total dosage (prewash + wash) shall also comply with the ecological criteria.

If the product has a water-soluble foil intended not to be removed before washing, the foil must be considered to be part of the product formulation in all requirements.

The following ingredients must not be included in the product, neither as part of the formulation nor as part of any preparation included in the formulation:

Phosphates EDTA (ethylenediamine tetraacetate) Nitromusks and polycyclic musks.

Assessment and verification: The applicant shall provide a completed and signed declaration of compliance.

According to the Article 6(6) of Regulation (EC) No 66/2010 on EU Ecolabel, the product or any part of it thereof shall not contain substances or mixtures meeting the criteria for classification with the hazard classes or categories in accordance with Regulation (EC) No 1272/2008 specified below nor shall it contain substances referred to in Article 57 of Regulation (EC) No 1907/2006.

Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16 December 2008 on classification, labelling and packaging of substances and mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006 (OJ L 353, 31.12.2008, p. 1).
Council Directive 67/548/EEC with adjustment to REACH according to Directive 2006/121/EC of the European Parliament and of the Council and Directive 1999/45/EC of the European Parliament and of the Council as amended.
GHS Hazard Statement	EU Risk Phrase
H300 Fatal if swallowed	R28
H301 Toxic if swallowed	R25
H304 May be fatal if swallowed and enters airways	R65
H310 Fatal in contact with skin	R27
H311 Toxic in contact with skin	R24
H330 Fatal if inhaled	R23/26
H331 Toxic if inhaled	R23
H340 May cause genetic defects	R46
H341 Suspected of causing genetic defects	R68
H350 May cause cancer	R45
H350i May cause cancer by inhalation	R49
H351 Suspected of causing cancer	R40
H360F May damage fertility	R60
H360D May damage the unborn child	R61
H360FD May damage fertility. May damage the unborn child	R60/61/60-61
H360Fd May damage fertility. Suspected of damaging the unborn child	R60/63
H360Df May damage the unborn child. Suspected of damaging fertility	R61/62
H361f Suspected of damaging fertility	R62
H361d Suspected of damaging the unborn child	R63
H361fd Suspected of damaging fertility. Suspected of damaging the unborn child.	R62-63
H362 May cause harm to breast fed children	R64
H370 Causes damage to organs	R39/23/24/25/26/27/28
H371 May cause damage to organs	R68/20/21/22
H372 Causes damage to organs through prolonged or repeated exposure	R48/25/24/23
H373 May cause damage to organs through prolonged or repeated exposure	R48/20/21/22
H400 Very toxic to aquatic life	R50
H410 Very toxic to aquatic life with long-lasting effects	R50-53
H411 Toxic to aquatic life with long-lasting effects	R51-53
H412 Harmful to aquatic life with long-lasting effects	R52-53
H413 May cause long-lasting harmful effects to aquatic life	R53
EUH059 Hazardous to the ozone layer	R59
EUH029 Contact with water liberates toxic gas	R29
EUH031 Contact with acids liberates toxic gas	R31
EUH032 Contact with acids liberates very toxic gas	R32
EUH070 Toxic by eye contact	R39-41
Sensitising substances
H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled	R42
H317: May cause allergic skin reaction	R43

This criterion applies to all ingredients present in concentrations ≥ 0,010 %, including preservatives, colouring agents and fragrances.

The use of substances or mixtures which upon processing change their properties (e.g. become no longer bioavailable, undergo chemical modification) in a way that the identified hazard no longer applies are exempted from the above requirement.

Derogations: the following substances or mixtures are specifically exempted from this requirement:

Referred to in Criterion 4e. This exemption is applicable provided that biocides’ bioaccumulation potentials are characterised by log Pow (log octanol/water partition coefficient) < 3,0 or an experimentally determined bioconcentration factor (BCF) ≤ 100.
Including stabilisers and other auxiliary substances in the preparations.
In concentrations lower than 1,0 % in the raw material as long as the total concentration in the final product is lower than 0,10 %.
Surfactants In concentrations < 25 % in the product	H400 Very toxic to aquatic life	R 50
Biocides used for preservation purposes	H410 Very toxic to aquatic life with long-lasting effects H411 Toxic to aquatic life with long-lasting effects	R50-53 R51-53
Fragrances	H412 Harmful to aquatic life with long-lasting effects	R52-53
Biocides used for preservation purposes
Enzymes	H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled	R42
Bleach catalysts
Enzymes	H317: May cause allergic skin reaction	R43
Bleach catalysts
NTA as an impurity in MGDA and GLDA	H351: Suspected of causing cancer	R40
Optical brighteners (only for heavy duty laundry detergent)	H413 May cause long lasting effects to aquatic life	R53

Assessment and verification: The applicant shall provide the exact formulation of the product to the competent body. The applicant shall also provide a declaration of compliance with this criterion, together with related documentation, such as declarations of compliance signed by the material suppliers and copies of relevant Safety Data Sheets for substances or mixtures.

No derogation from the exclusion in Article 6(6) of the Regulation (EC) No 66/2010 shall be given concerning substances identified as substances of very high concern and included in the list foreseen in Article 59 of Regulation (EC) No 1907/2006 present in mixtures in concentrations higher than 0,010 %.

Assessment and verification: The list of substances identified as substances of very high concern and included in the candidate list in accordance with Article 59 of Regulation (EC) No 1907/2006 can be found here: http://echa.europa.eu/chem_data/authorisation_process/candidate_list_table_en.asp

Reference to the list shall be made on the date of application. The applicant shall provide the exact formulation of the product to the competent body. The applicant shall also provide a declaration of compliance with this criterion, together with related documentation, such as declarations of compliance signed by the material suppliers and copies of relevant Safety Data Sheets for substances or mixtures.

Any ingredients added to the product as a fragrance shall be manufactured and handled following the code of practice of the International Fragrance Association (IFRA). The code can be found on IFRA website: http://www.ifraorg.org

The recommendations of the IFRA Standards concerning prohibition, restricted use and specified purity criteria for materials shall be followed by the manufacturer.

Fragrance substances subject to the declaration requirement provided for in Regulation (EC) No 648/2004 of the European Parliament and of the Council on detergents (Annex VII) and which are not already excluded by criterion 4b and (other) fragrance substances classified H317/R43 (May cause allergic skin reaction) and/or H334/R42 (May cause allergy or asthma symptoms or breathing difficulties if inhaled) shall not be present in quantities ≥ 0,010 % (≥ 100 ppm) per substance.

Assessment and verification: The applicant shall provide a signed declaration of compliance indicating the amount of fragrances in the product. The applicant shall also provide a declaration from the fragrance manufacturer specifying the content of each of the substances in the fragrances which are listed in Annex III, Part I to Council Directive 76/768/EEC as well as the content of (other) substances which have been assigned the risk phrases H317/R43 and/or H334/R42.

The weight/utility ratio (WUR) of the product shall not exceed the following values:

Product type	WUR
Powders	1,2 g/kg wash
Others (e.g. liquids, gels, tablets, capsules)	1,5 g/kg wash

WUR shall be calculated only for primary packaging (including caps, stoppers and hand pumps/spraying devices) using the formula below:

$\mathrm{WUR\; =\; \Sigma }\left[\left(W_i{\mathrm{+\; U}}_i\right)/\left(D_i{\mathrm{*\; r}}_i\right)\right]$

Where:

Wi the weight (g) of the packaging component (i) including the label if applicable. Ui the weight (g) of non-recycled (virgin) material in the packaging component (i). If the proportion of recycled material in the packaging component is 0 % then Ui = Wi. Di the number of functional units contained in the packaging component (i). The functional unit = dosage in g/kg wash. ri recycling figure, i.e. the number of times the packaging component (i) is used for the same purpose through a return or refill system. The default value for r is set to 1 (= no re-use). Only if the applicant can document that the packaging component is re-used for the same purpose, a higher value for r can be used in the calculation.

Exceptions:

Plastic/paper/cardboard packaging containing more than 80 % recycled material is exempted from this requirement.

Packaging is regarded as recycled if the raw material used to make the packaging has been collected from packaging manufacturers at the distribution stage or at the consumer stage. Where the raw material is industrial waste from the material manufacturer’s own production process, then the material will not be regarded as recycled.

Assessment and verification: Calculation of the WUR of the product. A spreadsheet for this calculation is available on the EU Ecolabel website. Account on the content for recycled material in the packaging. For approval of refill packaging, the applicant and/or retailer shall document that the refills will be/are available for purchase on the market.

Only phthalates that at the time of application have been risk assessed and have not been classified according to criterion 4(b) (and combinations hereof) may be used in the plastic packaging.

To allow for identification of different parts of the packaging for recycling, plastic parts in the primary packaging must be marked in accordance with DIN 6120, Part 2 or the equivalent. Caps and pumps are exempted from this requirement.

Assessment and verification: The applicant shall provide completed and signed declaration of compliance.

A minimum of 3 points shall be achieved from the matrix below. The maximum achievable points are 8 points for coldwater products, 7 points for low-temperature products and 6 points for other products.

Climate profile	Coldwater product (washing performance documented at ≤ 20 °C)	2P
	Low-temperature product (washing performance documented at > 20 °C to < 30 °C)	1P
Maximum dosage	Max dosage ≤ 14 g/kg wash (powder, tablet) or ≤ 14 ml/kg wash (liquid, gel)	2P
	Max dosage ≤ 16 g/kg wash (powder, tablet) or ≤ 16 ml/kg wash (liquid, gel)	1P
CDV	CDVchronic < 25 000 l/kg wash	2P
	CDVchronic between 25 000 to 30 000 l/kg wash	1P
aNBO	aNBO ≤ 75 % of limit value	1P
anNBO	anNBO ≤ 75 % of limit value	1P
Minimum points to be achieved in order to be awarded EU Ecolabel		3P

A minimum of 3 points shall be achieved from the matrix below. The maximum achievable points are 8 points for coldwater products, 7 points for low-temperature products and 6 points for other products.

Climate profile	Coldwater product (washing performance documented at ≤ 20 °C)	2P
	Low-temperature product (washing performance documented at > 20 °C to < 30 °C)	1P
Maximum dosage	Max dosage ≤ 14 g/kg wash (powder, tablet) or ≤ 14 ml/kg wash (liquid, gel)	2P
	Max dosage ≤ 16 g/kg wash (powder, tablet) or ≤ 16 ml/kg wash (liquid, gel)	1P
CDV	CDVchronic < 15 000 l/kg wash	2P
	CDVchronic between 15 000 to 18 000 l/kg wash	1P
aNBO	aNBO ≤ 75 % of limit value	1P
anNBO	anNBO ≤ 75 % of limit value	1P
Minimum points to be achieved in order to be awarded EU Ecolabel		3P

Assessment and verification: Calculation of the sum of points achieved for the product. A spreadsheet for this calculation is available on the EU Ecolabel website.

The recommended dosages shall be specified for ‘normally’ and ‘heavily’ soiled textiles and various water hardness’ ranges relevant to the countries concerned and referred as appropriate to the weight of textile. (Not applicable for stain removers).

The difference between the dosage recommendations for the lowest water hardness range (soft) for normally soiled textiles and the highest water hardness range (hard) for heavily soiled textiles may not differ by more than a factor of 2. (Not applicable for stain removers).

The reference dosage used for the washing performance test and for assessment of compliance with the ecological criteria on ingredients shall be the same as the recommended dosage on the package for ‘normally soiled’ textiles and a water hardness corresponding to 2,5 mmol CaCO3/l.

Where only water hardness lower than 2,5 mmol CaCO3/l are included in the recommendations, the maximum dosage recommended for ‘normally soiled’ shall be lower than the reference dosage used in the washing performance test (water hardness 2,5 mmol CaCO3/l).

The following washing recommendations (or equivalent) shall appear on the packaging of EU Ecolabelled products within the product group except pre-treatment stain removers. The washing recommendations may be present either as text or symbols:

Wash at the lowest possible temperature Always wash with full load Dose according to soil and water hardness, follow the dosing instructions If you are allergic to house dust, always wash bedding at 60 °C. Increase wash temperature to 60 °C in case of infectious diseases. Using this EU Ecolabelled product according to the dosage instructions will contribute to the reduction of water pollution, waste production and energy consumption.

In general, claims on the packaging shall be documented either through performance testing or other relevant documentation (e.g. claims of efficiency at low temperatures, claims of removal of certain stain types, claims of benefits for certain types or colours of textile or other claims of specific properties/benefits of the product).

E.g. if a product claims efficiency at 20 °C, the efficiency test must be performed at ≤ 20 °C (and correspondingly for other temperature claims below 30 °C). E.g. if a product claims to be efficient on certain stain types, this must be documented with efficiency test.

The removal of stains, for which no performance test has been conducted, shall not be claimed on the product.

Assessment and verification (a-d): The applicant shall provide a sample of the product label, together with a declaration of compliance with this criterion. Product claims shall be documented through appropriate test reports or other relevant documentation.