Commission Decisionof 22 March 2005establishing the formats relating to the database system pursuant to Directive 94/62/EC of the European Parliament and of the Council on packaging and packaging waste(notified under document number C(2005) 854)(Text with EEA relevance)(2005/270/EC) (revoked)
Article 1This Decision establishes the formats for reporting data pursuant to...
Article 2(1) For the purposes of this Decision, the following definitions...
Article 3(1) The data for total packaging shall cover all packaging...
Article 4(1) For the purposes of calculating and verifying attainment of...
Article 5(1) For the purposes of calculating and verifying attainment of...
Article 6For the purposes of calculating and verifying attainment of the...
Article 6a(1) For the purposes of attaining an adjusted level of...
Article 6b(1) Where a Member State takes into account the amounts...
Article 6c(1) For the purposes of calculating and verifying compliance with...
Article 6d(1) For the purposes of calculating and verifying attainment of...
Article 6eFor the purposes of calculating and verifying attainment of the...
Article 6f(1) The Member States shall take appropriate measures to ensure...
Article 7. . . . . . . . . ....
Article 8. . . . . . . . . ....
Article 9(1) The Member States shall report the data on the...
Article 10Decision 97/138/EC is repealed.
Article 11This Decision is addressed to the Member States.
ANNEX I
Notes:
1.White box: Provision of data is mandatory
2.Shaded boxes: Provision of data is voluntary
Notes:
1.White box: Provision of data is mandatory
2.Shaded boxes: Provision of data is voluntary
3.Where no exemption is in place, the value for (b)...
Notes:
1.White box: Provision of data is mandatory
2.Shaded boxes: Provision of data is voluntary
Notes:
1.White box: Provision of data is mandatory
2.Shaded boxes: Provision of data is voluntary
3.Where no exemption is in place, the value for (b)...
ANNEX IICalculation points referred to in Article 6c(1)(a)
ANNEX IIIMethodology for calculating the recycled metals separated after incineration of packaging waste
1.The following terms shall apply in relation to the formulas...
2.Following the separation of ferrous /non-ferrous concentrate from raw incineration...
3.Data on the mass of ferrous /non-ferrous metal concentrates shall...
4.The concentration of ferrous metals and aluminium resulting from the...
5.The mass of recycled ferrous metals/aluminium originating from packaging waste...
ANNEX IVFormat for quality check
I.Objectives of the report
II.General information
1.Member State:
2.Organisation submitting the data and the description:
3.Contact person / contact details:
4.Reference year:
5.Delivery date / version:
6.Link to data publication by the Member State (if any):...
III.Annual consumption of lightweight plastic carrier bags
1.Description of the parties involved in the data collection
2.Description of methods used
3.Accuracy of the data
3.1.Description of main issues affecting the accuracy of data on...
3.2.Explanation of the scope and validity of surveys to collect...
3.3.Statistical surveys used regarding the annual consumption of lightweight plastic...
3.4.Differences from previous year's data
IV.Reusable packaging
1.Parties involved in the data collection
2.Description of the application of the definition of reusable packaging...
3.Methods to collect and aggregate the data for the different...
4.Data verification
5.Accuracy of the data
5.1.Description of main issues affecting the accuracy of data on...
5.2.Explanation of the scope and validity of surveys to collect...
5.3.Statistical surveys used regarding reusable packaging
5.4.Differences from previous year's data
V.Packaging waste
1.Description of the parties involved in the data collection
2.Description of methods used
2.1.Packaging waste generation
2.1.1.Methods for determining packaging waste generation (mark with a cross...
2.1.2.Explanation of the application of estimates in case data on...
2.1.3.Indication whether an estimate has been calculated and added (Yes/No)...
2.1.4.Description of the methodology and verification of data on packaging...
2.1.5.Description of the methodology to report on composite packaging, including...
2.1.6.Verification of data on packaging waste generated
2.2.Packaging waste management
2.2.1.Classifications of treatment operations
2.2.2.Description of methods for determining packaging waste treatment (mark with...
2.2.3.Measurement points for recycling applied by the Member State
2.2.4.Description of the methodology to determine per material the amount...
2.2.5.Use of Average Loss Rates (ALRs)
2.2.6.Attribution of waste to packaging and non-packaging types and correction...
2.2.7.Attribution of waste to different Member States
2.2.8.Other recovery of waste
2.2.9.Information on the relevance of temporary storage of packaging waste...
2.2.10.Verification of data on packaging waste recycling
2.2.11.Calculation of recycling of metals from incinerator bottom ash
2.3.Accuracy of the data
2.3.1.Description of main issues affecting the accuracy of data on...
2.3.2.Explanation of the scope and validity of surveys to collect...
2.3.3.Statistical surveys used regarding packaging waste generation and treatment
2.3.4.Differences from previous year's data
2.3.5.Explanation detailing the causes of the tonnage difference (in relation...
VI.Traceability of waste and ensuring its treatment in conditions that...
1.Detailed description of the system for quality control and traceability...
2.Waste treated outside the Member State
3.Description of measures to ensure that, in accordance with Article...
VII.Confidentiality
VIII.Main national websites, reference documents and publications

Commission Decision

of 22 March 2005

establishing the formats relating to the database system pursuant to Directive 94/62/EC of the European Parliament and of the Council on packaging and packaging waste

(notified under document number C(2005) 854)

(Text with EEA relevance)

(2005/270/EC) (revoked)

F1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .