The Non-automatic Weighing Instruments Regulations 2016 No. 1152

Regulation 9(2)

SCHEDULE 1 U.K. INFORMATION TO BE MARKED ON REGULATED NON-AUTOMATIC WEIGHING INSTRUMENTS

1.  The number of the [F1 EU-]type examination certificate, where appropriate. U.K.

Textual Amendments

F1 Word in Sch. 1 para. 1 omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 41(a) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

2.  The manufacturer's name, registered trade name or registered trade mark. U.K.

3.  The accuracy class, enclosed in an oval or in two horizontal lines joined by two half circles. U.K.

4.  Maximum capacity, in the form “Max …..”. U.K.

5.  Minimum capacity, in the form “Min …..”. U.K.

6.  Verification scale interval in the form “e =…..” U.K.

7.  Type, batch and serial number U.K.

8.  When applicable the following: U.K.

(a) for instruments consisting of separate but associated units, the identification mark on each unit;

(b) scale interval if different from e, in the form “d =….”;

(c) maximum additive tare effect, in the form “T = +…..”;

(d) maximum subtractive tare effect if it is different from Max, in the form “T = -…”;

(e) tare interval if it is different from d, in the form “d_T = ….”;

(f) maximum safe load if it is different from “Max….”, in the form “Lim….”;

(g) the special temperature limits, in the form “...°C/…°C”; and

(h) ratio between load receptor and load.

9.  The requirements of points 1.2 to 1.5 of [F2 Schedule 8] must be complied with. E+W+S

Extent Information

E1 This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only

Textual Amendments

F2 Words in Sch. 1 para. 9 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 26 para. 41(b) (with Sch. 26 para. 5) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

9.  The requirements of points 1.2 to 1.5 of the Annex III to the Directive must be complied with. N.I.

Extent Information

E2 This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only