xmlns:atom="http://www.w3.org/2005/Atom" xmlns:atom="http://www.w3.org/2005/Atom"

ANNEX I CU.K.Requirements for construction, testing, installation, and inspection

Appendix 16

ADAPTOR FOR M1 AND N1 CATEGORY VEHICLES U.K.

7.TYPE APPROVAL OF RECORDING EQUIPMENT WHEN AN ADAPTOR IS USEDU.K.
7.1. General points U.K.
ADA_037Recording equipment shall be submitted for type approval complete, with the adaptor [425].U.K.
ADA_038Any adaptor may be submitted for its own type approval, or for type approval as a component of a recording equipment.U.K.
ADA_039Such type approval shall include functional tests involving the adaptor. Positive results to each of these tests are stated by an appropriate certificate [426].U.K.
7.2. Functional certificate U.K.
ADA_040A functional certificate of an adaptor or of recording equipment including an adaptor shall be delivered to the adaptor manufacturer only after all the following minimum functional tests have been successfully passed.U.K.
NoTestDescriptionRelated requirements
1. Administrative examination
1.1DocumentationCorrectness of documentation of the adaptor
2. Visual inspection
2.1.Compliance of the adaptor with documentation
2.2.Identification / markings of the adaptorADA_027, ADA_028
2.3Materials of the adaptor

[219] to [223]

ADA_026

2.4.SealingADA_017, ADA_018, ADA_034
3. Functional tests
3.1Inducing the speed pulses to the embedded motion sensorADA_013
3.2Interfacing and adapting incoming speed pulsesADA_011, ADA_012
3.3Motion measurement accuracy[30] to [35], [217]
4. Environmental tests
4.1Manufacturer test resultsResults of manufacturer environment tests.ADA_020, ADA_021, ADA_022, ADA_024
5. EMC
5.1radiated emissions and susceptibilityVerify compliance with Directive 2006/28/ECADA_024
5.2Manufacturer test resultsResults of manufacturer environment tests.ADA_024