xmlns:atom="http://www.w3.org/2005/Atom" xmlns:atom="http://www.w3.org/2005/Atom"

ANNEX I CU.K.Requirements for construction, testing, installation, and inspection

Appendix 14

REMOTE COMMUNICATION FUNCTION U.K.

5.REMOTE COMMUNICATION DESIGN AND PROTOCOLSU.K.
5.6 Data transfer between the DSRC-VU and VU U.K.
5.6.1 Physical Connection and interfaces U.K.
DSC_66The connection between the VU and the DSRC-VU can be either by physical cable or short range wireless communication based on Bluetooth v4.0 BLE.U.K.
DSC_67Regardless of the choice of the physical connection and interface, the following requirements shall be satisfied:U.K.
DSC_68
[F1a) In order that different suppliers may be contracted to supply the VU and the DSRC-VU, and indeed different batches of DSRC-VU, the connection between the VU and the DSRC-VU not internal to the VU shall be an open standard connection. The VU shall connect with the DSRC-VU either] U.K.
i)

using fixed cable of at least 2 meters, using a Straight DIN 41612 H11 Connector — 11 pin approved male connector from the DSRC-VU to match a similar DIN/ISO approved female connector from the VU device,

ii)

using Bluetooth Low Energy (BLE)

iii)

using a standard ISO 11898 or SAE J1939 connection

DSC_69
b)the definition of the interfaces and connection between the VU and DSRC-VU must support the application protocol commands defined in 5.6.2. andU.K.
DSC_70
c)the VU and DSRC-VU must support the operation of the data transfer via the connection in regard to performance and power supply.U.K.