ANNEX I CU.K.Requirements for construction, testing, installation, and inspection
Appendix 11
COMMON SECURITY MECHANISMS U.K.
PART BU.K. SECOND-GENERATION TACHOGRAPH SYSTEM
12.VU — MOTION SENSOR PAIRING AND COMMUNICATIONU.K.
12.3. VU — Motion Sensor Pairing and Communication using AES U.K.
CSM_219The pairing information that is sent in instructions 43 (VU request) and 50 (MoS reply) shall be assembled as specified in section 7.6.10 of [ISO 16844-3], except that the AES algorithm shall be used instead of the TDES algorithm in the pairing data encryption scheme, thus resulting in two AES encryptions, and adopting the padding specified in CSM_220 to fit with the AES block size. The key K'p used for this encryption shall be generated as follows:U.K.
In case the pairing key KP is 16 bytes long: K'p = KP XOR (Ns||Ns)
In case the pairing key KP is 24 bytes long: K'p = KP XOR (Ns||Ns||Ns)
In case the pairing key KP is 32 bytes long: K'p = KP XOR (Ns||Ns||Ns||Ns)
where Ns is the 8-byte serial number of the motion sensor.