Regulation (EU) 2016/426 of the European Parliament and of the CouncilDangos y teitl llawn

CHAPTER III U.K. CONFORMITY OF APPLIANCES AND FITTINGS

[F1 Article 13 U.K. Presumption of conformity of appliances and fittings

1. Appliances and fittings which are in conformity with a designated standard or part thereof shall be presumed to be in conformity with the essential requirements set out in Annex I covered by that standard or part thereof.

2. The presumption in paragraph 1 is rebuttable.]

Textual Amendments

F1 Art. 13 substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 36 para. 2(13) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

Article 14 U.K. Conformity assessment procedures for appliances and fittings

1. Before an appliance or a fitting is placed on the market, the manufacturer shall submit it to a conformity assessment procedure in accordance with paragraph 2 or 3.

2. The conformity of series-manufactured appliances and fittings with the requirements of this Regulation shall be assessed by means of the F2 ... type-examination (Module B — production type) set out in point 1 of Annex III, combined with one of the following modules, at the choice of the manufacturer:

(a) conformity to type based on internal production control plus supervised product checks at random intervals (Module C2), set out in point 2 of Annex III;

(b) conformity to type based on quality assurance of the production process (Module D), set out in point 3 of Annex III;

(c) conformity to type based on product quality assurance (Module E), set out in point 4 of Annex III;

(d) conformity to type based on product verification (Module F), set out in point 5 of Annex III.

3. In the case of an appliance or a fitting produced as a single unit or in small quantities, the manufacturer may choose one of the procedures set out in paragraph 2 of this Article or conformity based on unit verification (Module G) set out in point 6 of Annex III.

4. Records and correspondence relating to conformity assessment of an appliance or a fitting shall be drawn up in [F3 English] or in a language accepted by [F4 the approved body].

Textual Amendments

F2 Word in Art. 14(2) omitted (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 36 para. 2(14)(a) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F3 Word in Art. 14(4) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 36 para. 2(14)(b)(i) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F4 Words in Art. 14(4) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 36 para. 2(14)(b)(ii) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

Article 15 U.K. F5 ... Declaration of conformity

1. The F6 ... declaration of conformity shall state that the fulfilment of the essential requirements set out in Annex I has been demonstrated.

2. The F7 ... declaration of conformity shall have the model structure set out in Annex V, shall contain the elements specified in the relevant modules set out in Annex III and shall be continuously updated. It shall be [F8 prepared in or translated into English].

3. In order to assist compliance of finished appliances with the applicable essential requirements set out in Annex I, the F9 ... declaration of conformity for a fitting shall state the characteristics of the fitting and shall contain instructions on how the fitting should be incorporated into an appliance or assembled to constitute an appliance. The F9 ... declaration of conformity shall be in [F10 English].

[F11 4. Where an appliance or a fitting is subject to more than one enactment requiring a declaration of conformity, the manufacturer must draw up a single declaration of conformity which identifies each enactment by its title.]

5. By drawing up the F12 ... declaration of conformity, the manufacturer shall assume responsibility for the compliance of the appliance or the fitting with the requirements laid down in this Regulation.

6. A copy of the F13 ... declaration of conformity shall be supplied with the fitting.

Textual Amendments

F5 Word in Art. 15 heading omitted (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 36 para. 2(15)(a) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F6 Word in Art. 15(1) omitted (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 36 para. 2(15)(a) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F7 Word in Art. 15(2) omitted (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 36 para. 2(15)(b)(i) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F8 Words in Art. 15(2) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 36 para. 2(15)(b)(ii) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F9 Word in Art. 15(3) omitted (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 36 para. 2(15)(c)(i) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F10 Word in Art. 15(3) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 36 para. 2(15)(c)(ii) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F11 Art. 15(4) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 36 para. 2(15)(d) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F12 Word in Art. 15(5) omitted (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 36 para. 2(15)(a) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F13 Word in Art. 15(6) omitted (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 36 para. 2(15)(a) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

Article 16 U.K. General principles of the [F14 UK] marking

The [F15 UK] marking shall be subject to the general principles set out in Article 30 of Regulation (EC) No 765/2008.

Textual Amendments

F14 Word in Art. 16 heading substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 36 para. 2(16) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F15 Word in Art. 16 substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 36 para. 2(16) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

Article 17 U.K. Rules and conditions for affixing the [F16 UK] marking

[F17 A1. Paragraph 1 is subject to paragraph (1A).]

1. The [F18 UK] marking shall be affixed visibly, legibly and indelibly to the appliance and the fitting or to their data plate as far as relevant. Where that is not possible or not warranted on account of the nature of the appliance or the fitting, it shall be affixed to the packaging and to the documents accompanying the appliance or the fitting.

[F19 1A. For a period of [F20 seven years] beginning with IP completion day, paragraph 1 does not apply where the UK marking is affixed visibly, legibly and indelibly to—

(a) a label affixed to the appliance and fitting or their data plate; or

(b) a document accompanying the appliance and fitting or their data plate.]

2. The [F21 UK] marking shall be affixed before the appliance or the fitting is placed on the market.

3. The [F22 UK] marking shall be followed by the identification number of the [F23 approved] body involved in the production control phase of the appliance or of the fitting and by the last two digits of the year in which the [F22 UK] marking was affixed. The identification number of the [F23 approved] body shall be affixed by the body itself or, under its instructions, by the manufacturer or his authorised representative.

4. The [F24 UK] marking and the identification number referred to in paragraph 3 may be followed by any other mark indicating a special risk or use.

F25 5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Textual Amendments

F16 Word in Art. 17 heading substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 36 para. 2(17)(a) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F17 Art. 17(A1) inserted by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 36 para. 2(17)(aa) (as amended by S.I. 2020/676, regs. 1(1), 2 and S.I. 2020/1460, reg. 1(4), Sch. 3 para. 25(6)); 2020 c. 1, Sch. 5 para. 1(1)

F18 Word in Art. 17(1) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 36 para. 2(17)(a) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F19 Art. 17(1A) inserted by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 36 para. 2(17)(ab) (as amended by S.I. 2020/676, regs. 1(1), 2 and S.I. 2020/1460, reg. 1(4), Sch. 3 para. 25(6)); 2020 c. 1, Sch. 5 para. 1(1)

F20 Words in Art. 17(1A) substituted (E.W.S.) (31.12.2022) by virtue of The Product Safety and Metrology (Amendment and Transitional Provisions) Regulations 2022 (S.I. 2022/1393), regs. 1(1), 3, Sch. 2

F21 Word in Art. 17(2) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 36 para. 2(17)(a) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F22 Word in Art. 17(3) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 36 para. 2(17)(b)(i) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F23 Word in Art. 17(3) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 36 para. 2(17)(b)(ii) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F24 Word in Art. 17(4) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 36 para. 2(17)(a) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F25 Art. 17(5) omitted (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 36 para. 2(17)(c) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

Article 18 U.K. Inscriptions

1. The inscriptions referred to in Annex IV shall be affixed visibly, legibly and indelibly to the appliance or to its data plate and, as far as relevant, to the fitting or to its data plate.

2. The inscriptions referred to in Annex IV shall be affixed before the appliance or the fitting is placed on the market.