Regulation (EU) 2016/425 of the European Parliament and of the CouncilDangos y teitl llawn

Article 8 U.K. Obligations of manufacturers

1. When placing PPE on the market, manufacturers shall ensure that it has been designed and manufactured in accordance with the applicable essential health and safety requirements set out in Annex II.

2. Manufacturers shall draw up the technical documentation referred to in Annex III (‘technical documentation’) and carry out the applicable conformity assessment procedure referred to in Article 19 or have it carried out.

Where compliance of PPE with the applicable essential health and safety requirements has been demonstrated by the appropriate procedure, manufacturers shall draw up the F1 ... declaration of conformity referred to in Article 15 and affix the [F2 UK] marking referred to in Article 16.

3. Manufacturers shall keep the technical documentation and the F3 ... declaration of conformity for 10 years after the PPE has been placed on the market.

4. Manufacturers shall ensure that procedures are in place for series production to remain in conformity with this Regulation. Changes in the design or characteristics of the PPE and changes in the [F4 designated] standards or in other technical specifications by reference to which the conformity of the PPE is declared shall be adequately taken into account.

When deemed appropriate with regard to the risks presented by PPE, manufacturers shall, to protect the health and safety of consumers and other end-users, carry out sample testing of PPE made available on the market, investigate, and, if necessary, keep a register of complaints, of non-conforming PPE and PPE recalls, and shall keep distributors informed of any such monitoring.

5. Manufacturers shall ensure that the PPE which they place on the market bears a type, batch or serial number or other element allowing its identification, or, where the size or nature of the PPE does not allow it, that the required information is provided on the packaging or in a document accompanying the PPE.

6. Manufacturers shall indicate, on the PPE, their name, registered trade name or registered trade mark and the postal address at which they can be contacted or, where that is not possible, on its packaging or in a document accompanying the PPE. The address shall indicate a single point at which the manufacturer can be contacted. The contact details shall be in a language easily understood by end-users and [F5 the market surveillance authority].

7. Manufacturers shall ensure that the PPE is accompanied by the instructions and information set out in point 1.4 of Annex II [F6 and that they are clear, legible and in easily understandable English].

8. The manufacturer shall either provide the F7 ... declaration of conformity with the PPE or include in the instructions and information set out in point 1.4 of Annex II the internet address at which the F7 ... declaration of conformity can be accessed.

9. Manufacturers who consider or have reason to believe that PPE which they have placed on the market is not in conformity with this Regulation shall immediately take the corrective measures necessary to bring that PPE into conformity, to withdraw it or to recall it, as appropriate. Furthermore, where the PPE presents a risk, manufacturers shall immediately inform the [F8 enforcement authority] to that effect, giving details, in particular, of the non-conformity and of any corrective measures taken.

10. Manufacturers shall, further to a reasoned request from [F9 the enforcement authority], provide it with all the information and documentation, in paper or electronic form, necessary to demonstrate the conformity of the PPE with this Regulation, in a language which can be easily understood by that authority. They shall cooperate with that authority, at its request, on any action taken to eliminate the risks posed by PPE which they have placed on the market.

Textual Amendments

F1 Word in Art. 8(2) omitted (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 35 para. 3(8)(a)(i); 2020 c. 1, Sch. 5 para. 1(1)

F2 Word in Art. 8(2) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 35 para. 3(8)(a)(ii); 2020 c. 1, Sch. 5 para. 1(1)

F3 Word in Art. 8(3) omitted (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 35 para. 3(8)(b); 2020 c. 1, Sch. 5 para. 1(1)

F4 Word in Art. 8(4) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 35 para. 3(8)(c); 2020 c. 1, Sch. 5 para. 1(1)

F5 Words in Art. 8(6) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 35 para. 3(8)(d); 2020 c. 1, Sch. 5 para. 1(1)

F6 Words in Art. 8(7) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 35 para. 3(8)(e); 2020 c. 1, Sch. 5 para. 1(1)

F7 Word in Art. 8(8) omitted (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 35 para. 3(8)(f); 2020 c. 1, Sch. 5 para. 1(1)

F8 Words in Art. 8(9) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 35 para. 3(8)(g); 2020 c. 1, Sch. 5 para. 1(1)

F9 Words in Art. 8(10) substituted (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 35 para. 3(8)(h); 2020 c. 1, Sch. 5 para. 1(1)

Modifications etc. (not altering text)

C1 Art. 8(2) restricted (E.) (31.12.2020) by The Personal Protective Equipment (Temporary Arrangements) (Coronavirus) (England) Regulations 2020 (S.I. 2020/1484), regs. 1(1), 2, 3

C2 Art. 8(2) restricted (W.) (31.12.2020) by The Personal Protective Equipment (Temporary Arrangements) (Coronavirus) (Wales) Regulations 2020 (S.I. 2020/1489), regs. 1(1), 2, 3

C3 Art. 8(2) restricted (S.) (1.2.2021) by The Personal Protective Equipment (Temporary Arrangements) (Coronavirus) (Scotland) Regulations 2021 (S.S.I. 2021/50), regs. 1, 2, 3 (with reg. 4(4))