[F1Specific conditions concerning virtual testing methods U.K.
1. List of regulatory acts U.K.
Regulatory act reference | Annex and paragraph | Specific conditions | |
---|---|---|---|
3. | Directive 70/221/EEC | Annex II (Rear underrun protection) Point 5.4.5. | |
6. | Directive 70/387/EEC | Annex II Point 4.3. | |
8. | Directive 2003/97/EC | Annex III All provisions in Sections 3, 4 and 5. | Prescribed fields of vision of rear-view mirrors. |
12. | Directive 74/60/EEC | Annex I All provisions in Section 5 (Specifications). | Measurement of all radii of curvature and of all projections except for those requirements where a force has to be applied in order to check compliance with the provisions. |
Annex II | Determination of the head-impact zone. | ||
16. | Directive 74/483/EEC | Annex I All provisions in Section 5 (General specifications) and Section 6 (Particular specifications). | Measurement of all radii of curvature and of all projections except for those requirements where a force has to be applied in order to check compliance with the provisions. |
20. | Directive 76/756/EEC | Section 6 (Individual specifications) of UNECE Regulation No 48. | The test drive provided for in Point 6.22.9.2.2 shall be performed on a real vehicle. |
Provisions of Annexes 4, 5 and 6 to UNECE Regulation No 48. | |||
27. | Directive 77/389/EEC | Annex II, Section 2 | |
32. | Directive 77/649/EEC | Section 5 (Specifications) of Annex I. | |
35. | Directive 78/318/EEC | Annex I | Point 5.1.2. Measurement of the swept area only. |
37. | Directive 78/549/EEC | Section 2 (Special requirements) of Annex I | |
42. | Directive 89/297/EEC | Annex I Point 2.8. | Resistance under a horizontal force and deflection measurement. |
49. | Directive 92/114/EEC | Annex I All provisions in Section 4 (Specific requirements). Regarding N 1 vehicles, the provisions referred to in item 16 of this Appendix shall apply. | Measurement of all radii of curvature and of all projections except for those requirements where a force has to be applied in order to check compliance with the provisions. |
50. | Directive 94/20/EC | Annex V ‘ Requirements for mechanical coupling Devices ’ | All provisions of Sections 1 to 8 included. |
Annex VI Point 1.1. | Strength tests on mechanicals couplings of simple design may be replaced by virtual tests. | ||
Section 4 of Annex VI ‘ Testing of mechanical coupling devices ’ | Points 4.5.1. (Strength test), 4.5.2. (Resistance to buckling) and 4.5.3. (Resistance to bending moment) only. | ||
52. | Directive 2001/85/EC | Annex I | Point 7.4.5. Stability test under the conditions specified in the Appendix to Annex I. |
Annex IV Strength of superstructure | Appendix 4 — Verification of strength of the superstructure by calculation. | ||
57. | Directive 2000/40/EC | Section 3 of Annex 5 to UNECE Regulation 93. | Resistance under a horizontal force and deflection measurement.] |
Textual Amendments
F1 Substituted by Commission Regulation (EU) No 371/2010 of 16 April 2010 replacing Annexes V, X, XV and XVI to Directive 2007/46/EC of the European Parliament and of the Council establishing a framework for the approval of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles (Framework Directive) (Text with EEA relevance).