- Latest available (Revised) - English
- Latest available (Revised) - Welsh
- Original (As made) - English
- Original (As made) - Welsh
This is the original version (as it was originally made).
Regulations 4, 10, 15 and 17
Parameters | Maximum concentration or value | Units of Measurement |
---|---|---|
Escherichia coli (E. coli) | 0 | Number/100ml |
Enterococci | 0 | Number/100ml |
In the case of water in bottles or containers: | ||
Escherichia coli (E.coli) | 0 | Number/250ml |
Enterococci | 0 | Number/250ml |
Pseudomonas aeruginosa | 0 | Number/250ml |
Colony count 22°C | 100 | Number/ml |
Colony count 37°C | 20 | Number/ml |
Parameters | Maximum concentration or value | Units of Measurement |
---|---|---|
(i) The parametric value refers to the residual monomer concentration in the water as calculated according to specifications of the maximum release from the corresponding polymer in contact with the water. This is controlled by product specification. | ||
(ii) See also the nitrate-nitrite formula in regulation 4(c). | ||
(iii) For these purposes “Pesticides” means:
related products (inter alia, growth regulators) and their relevant metabolites, degradation and reaction products. Only those pesticides likely to be present in a given supply need be monitored. | ||
(iv) “Pesticides total” means the sum of the concentrations of the individual pesticides detected and quantified in the monitoring process. | ||
(v) The specified compounds are:
The parametric value applies to the sum of the concentrations of the individual compounds detected and quantified in the monitoring process. | ||
(vi) The parametric value applies to the sum of the concentrations of the individual compounds detected and quantified in the monitoring process. | ||
(vii) The specified compounds are:
The parametric value applies to the sum of the concentrations of the individual compounds detected and quantified in the monitoring process. | ||
Acrylamide (i) | 0.10 | μg/l |
Antimony | 5.0 | μg/l |
Arsenic | 10 | μg/l |
Benzene | 1.0 | μg/l |
Benzo(a)pyrene | 0.010 | μg/l |
Boron | 1.0 | mg/l |
Bromate | 10 | μg/l |
Cadmium | 5.0 | μg/l |
Chromium | 50 | μg/l |
Copper | 2.0 | mg/l |
Cyanide | 50 | μg/l |
1, 2 dichloroethane | 3.0 | μg/l |
Epichlorohydrin (i) | 0.10 | μg/l |
Fluoride | 1.5 | mg/l |
Lead | 25 (until 25th December 2013) | μg/l |
10 (from 25th December 2013) | μg/l | |
Mercury | 1.0 | μg/l |
Nickel | 20 | μg/l |
Nitrate (ii) | 50 | mg/l |
Nitrite(ii) | 0.5 (or 0.1 in the case of treatment works) | mg/l |
Pesticides (iii)— | ||
| 0.030 | μg/l |
| 0.030 | μg/l |
| 0.030 | μg/l |
| 0.030 | μg/l |
| 0.10 | μg/l |
| 0.50 | μg/l |
Polycyclic aromatic hydrocarbons (v) | 0.10 | μg/l |
Selenium | 10 | μg/l |
Tetrachloroethene and Trichloroethene (vi) | 10 | μg/l |
Trihalomethanes: Total (vii) | 100 | μg/l |
Vinyl chloride (i) | 0.50 | μg/l |
Parameters | Maximum concentration or value | Units of Measurement |
---|---|---|
Aluminium | 200 | μg/l |
Colour | 20 | mg/l Pt/Co |
Iron | 200 | μg/l |
Manganese | 50 | μg/l |
Odour | Acceptable to consumers and no abnormal change | |
Sodium | 200 | mg/l |
Taste | Acceptable to consumers and no abnormal change | |
Tetrachloromethane | 3 | μg/l |
Turbidity | 4 | NTU |
Parameters | Maximum concentration or value or state (unless otherwise stated) | Units of measurement |
---|---|---|
(i) The water should not be aggressive. | ||
(ii) Excluding tritium, potassium-40, radon and radon decay products. | ||
(iii) Only in the case of surface water or groundwater that has been influenced by surface water. | ||
Ammonium | 0.50 | mg/l |
Chloride (i) | 250 | mg/l |
Clostridium perfringens | 0 | Number/100ml |
(including spores) | ||
Coliform bacteria | 0 | Number/100ml (Number/250ml in the case of water put into bottles or containers) |
Colony counts | No abnormal change | Number/ml at 22°C |
No abnormal change | Number/ml at 37°C | |
Conductivity (i) | 2500 | μS/cm at 20°C |
Hydrogen ion | 9.5 (maximum) | pH value |
6.5 (minimum) (in the case of still water put into bottles or containers the minimum is 4.5) | pH value | |
Sulphate (i) | 250 | mg/l |
Total indicative dose (for radioactivity) (ii) | 0.10 | mSv/year |
Total organic carbon (TOC) | No abnormal change | mgC/l |
Tritium | ||
(for radioactivity) | 100 | Bq/l |
Turbidity(iii) | 1 | NTU |
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area. The revised version is currently only available in English.
Original (As Enacted or Made) - English: The original English language version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Original (As Enacted or Made) - Welsh:The original Welsh language version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: