The Plastic Materials and Articles in Contact with Food (Wales) Regulations 2009

PART 1 Preliminary

Title, application and commencement

1.  The title of these Regulations is the Plastic Materials and Articles in Contact with Food (Wales) Regulations 2009, apply in relation to Wales only and come into force on 7th March 2009.

Interpretation

2.—(1) In these Regulations —

“the Act” means the Food Safety Act 1990;

“the 2007 Regulations” means the Materials and Articles in Contact with Food (Wales) Regulations 2007(1);

“Directive 82/711” means Council Directive 82/711/EEC laying down the basic rules necessary for testing migration of the constituents of plastic materials and articles intended to come into contact with foodstuffs(2);

“Directive 85/572” means Council Directive 85/572/EEC laying down the list of simulants to be used for testing migration of constituents of plastic materials and articles intended to come into contact with foodstuffs(3);

“Directive 88/388” means Council Directive 88/388/EEC on the approximation of the laws of the Member States relating to flavourings for use in foodstuffs and to source materials for their production(4);

“Directive 89/107” means Council Directive 89/107/EEC on the approximation of the laws of the Member States concerning food additives authorised in foodstuffs intended for human consumption(5);

“the Purity Directives” means Commission Directive 2008/60/EC laying down specific purity criteria concerning sweeteners for use in foodstuffs(6), Commission Directive 2008/128/EC laying down specific purity criteria concerning colours for use in foodstuffs(7) and Commission Directive 2008/84/EC laying down specific purity criteria on food additives other than colours or sweeteners(8);

“the Directive” means Commission Directive 2002/72/EC relating to plastic materials and articles intended to come into contact with foodstuffs (9);

“Regulation 1935/2004” means Regulation (EC) No 1935/2004 of the European Parliament and of the Council on materials and articles intended to come into contact with food and repealing Directives 80/590/EEC and 89/109/EEC(10);

“Regulation 1895/2005” means Commission Regulation (EC) No 1895/2005 on the restriction of use of certain epoxy derivatives in materials and articles intended to come into contact with food(11);

“authorised officer” means any person, whether or not an officer of the enforcement authority, who is authorised by it in writing to act in matters arising under these Regulations;

“BADGE” has the meaning given in Article 1(1)(a) of Regulation 1895/2005;

“BFDGE” has the meaning given in Article 1(1)(b) of Regulation 1895/2005;

“business” is to be construed in accordance with section 1(3) of the Act;

“capable” means capable as established under regulation 13;

“EFSA” means the European Food Safety Authority;

“enforcement authority” means an authority having responsibility under regulation 15 for executing and enforcing these Regulations;

“fatty foods” means foods for which, in migration testing, simulant D is specified in Directive 85/572/EEC;

“food” is to be construed in accordance with section 16(5) of the Act;

“good technical quality” means good technical quality as regards the purity criteria;

“handling of food” means use in connection with the storage, preparation, packaging, sale or serving of food;

“import” means import in the course of a business;

“infants” means children under the age of twelve months;

“material or article” means a material or article falling within the definition of materials and articles in Article 1(2) of Regulation 1895/2005;

“monomer” means any substance that is included for the purposes of the Directive among monomers and other starting substances;

“NOGE” has the meaning given in Article 1(1)(c) of Regulation 1895/2005;

“plastic functional barrier” means a barrier consisting of one or more layers of plastics which ensures that the finished material or article complies with Article 3 of Regulation 1935/2004 and with the Directive;

“plastic layers or coatings” means plastic layers or plastic coatings forming gaskets in lids that together are composed of two or more layers of different types of materials;

“plastic material or article” means anything which for the purposes of the Directive is included among those plastic materials and articles and parts thereof to which the Directive applies;

“plastic multi-layer material or article” means a plastic material or article composed of two or more layers of materials each consisting exclusively of plastics, which are bound together by means of adhesives or other means;

“sell” includes offer or expose for sale or have in possession for sale, and “sale” shall be construed accordingly;

“young children” means children aged between one and three years.

(2) For the purposes of these Regulations the supply otherwise than on sale, in the course of a business, of any material or article is deemed to be a sale.

(3) Any other expression used in these Regulations and in the Directive, Directive 82/711, Directive 85/572 or Regulation 1895/2005 bears the same meaning in these Regulations as it bears in that Directive or Regulation.

(4) Except in regulation 11(3) and in Part 5 of Schedule 3, any reference to a numbered Annex is a reference to that Annex to the Directive.

(5) Any reference to an Annex to the Directive is a reference to that Annex as amended from time to time.

PART 2 Requirements for Materials and Articles

Restriction on the use, sale or import of plastic materials and articles

3.—(1) No person may —

(a) use for the handling of food in the course of a business;

(b) sell for the purpose of handling of food; or

(c) import from anywhere other than an EEA State for the purpose of handling of food,

a plastic material or article which fails to meet the required standard.

(2) For the purposes of this regulation a plastic material or article fails to meet the required standard if —

(a) it has been manufactured —

(i) with a monomer which is not a permitted monomer as described in regulation 4(2), or

(ii) with an additive which is not a permitted additive as described in regulation 5(2); or

(b) it does not meet the required standards set out in regulation 6, 7, 8, 9, 10 or 11,

but a plastic material or article meets the required standard if it meets the applicable conditions set out in Schedule 5 (transitional arrangements).

Restriction on the use of monomers in the manufacture of plastic materials and articles

4.—(1) Subject to paragraphs (3), (4) and (5), no person may use any monomer other than a permitted monomer in the manufacture of any plastic material or article.

(2) A permitted monomer is any monomer which is —

(a) of good technical quality;

(b) identified by PM/REF No, CAS No (if any) and name in columns 1, 2 and 3 respectively of Sections A or B of Annex II; and

(c) used in accordance with any restrictions and specifications for that monomer set out or referred to in column 4 of those Sections.

(3) Paragraph (1) does not apply to the use of a monomer in the manufacture of any —

(a) surface coatings obtained from resinous or polymerised products in liquid, powder or dispersion form, including but not limited to varnishes, lacquers and paints;

(b) epoxy resins;

(c) adhesives and adhesion promoters; or

(d) printing inks.

(4) Paragraph (1) is not be taken to prohibit the manufacture of any plastic material or article with any substance if the substance in question is a mixture which falls within paragraph 3(c) (relating to mixtures of authorised substances) of Annex II and is of good technical quality.

(5) In any proceedings for an offence under these Regulations where it is alleged that a plastic material or article does not comply with paragraph (1) because it was manufactured with any monomer (whether or not of good technical quality) other than one mentioned in paragraph (2)(b) it is a defence for the person accused to prove that each such monomer —

(a) is present in the finished plastic material as an impurity, a reaction intermediate or a decomposition product which falls within paragraph 3(a) of Annex II, or

(b) is an oligomer or a natural or synthetic macromolecular substance or a mixture thereof which falls within paragraph 3(b) of that Annex,

and is of good technical quality.

(6) Schedule 1 has effect to supplement this regulation.

Restriction on the use of additives in the manufacture of plastic materials and articles

5.—(1) Subject to paragraph (3) no person may use in the manufacture of any plastic material or article any additive other than a permitted additive.

(2) A permitted additive is —

(a) an additive identified by PM/REF No, CAS No (if any) and name in columns 1, 2 and 3 respectively of Section A or B of Annex III which —

(i) is of good technical quality, and

(ii) is used in accordance with any restrictions and specifications for that additive set out in the corresponding entry in column 4 of Section A or B of that Annex;

(b) any food additive authorised by Directive 89/107 or any flavouring authorised by Directive 88/388 that does not migrate into food —

(i) in a quantity that has a technological function in the final food product, or

(ii) where the food is of a type for which the use of any such food additive or flavouring is so authorised, in quantities exceeding the limits provided for in Directive 89/107 or Directive 88/388 as appropriate, or in Annex III, whichever is the lower;

(c) any additive where that additive, at the time it is used under paragraph (1), appears in the provisional list mentioned in Article 4a(3) of the Directive and otherwise complies with the requirements of the law in England and Wales;

(d) any additive not mentioned in sub-paragraphs (a) to (c) that is used —

(i) in the manufacture of plastic layers or coatings, or

(ii) as a polymerisation production aid not intended to remain in the finished article

and which otherwise complies with the requirements of the law in England and Wales; or

(e) before 1st January 2010, any other additive used in accordance with the requirements of the Plastic Materials and Articles in Contact with Food (Wales) (No.2) Regulations 2008(12) and which, but for their revocation, would have been permitted by those Regulations.

(3) In any proceedings for an offence under these Regulations where it is alleged that the commission of the offence is due to the manufacture of a plastic material or article with any additive identified in Section A or B of Annex III or in the provisional list mentioned in Article 4a(3) of the Directive which is not of good technical quality, it is a defence for the person accused to prove that each such additive is present in the finished plastic material or article as an impurity, a reaction intermediate or a decomposition product.

(4) Schedule 1 has effect to supplement this regulation.

Required standard for non-migration of constituents of monomers

6.—(1) Subject to paragraphs (2) and (3), where a migration limit expressed in mg/kg is indicated in column 4 of the relevant section of Section A or B of Annex II in relation to any monomer, a plastic material or article manufactured from that monomer meets the required standard under this regulation if it is not capable of transferring constituents of that monomer to food with which the plastic material or article may come into contact in quantities exceeding the appropriate limit, and for the purposes of this paragraph the appropriate limit is —

(a) the number of milligrams expressed in column 4 released per kilogram of food in the case of any plastic material or article other than one specified in sub-paragraph (b); and

(b) one sixth of the number of milligrams expressed in column 4 per square decimetre of surface area of the plastic material or article if the plastic material or article comprises —

(i) an article which is a container or is comparable to a container or can be filled, having a capacity of less than 500 millilitres or more than 10 litres, or

(ii) sheet, film or other plastic material or article which cannot be filled or for which it is impracticable to estimate the relationship between the surface area of the material or article in question and the quantity of food in contact with that surface area.

(2) A plastic material or article manufactured from any monomer for which a migration limit in mg/kg is expressed in column 4 of Section A or B of Annex II is not deemed to be capable of transferring constituents of that monomer to food with which the plastic material or article may come into contact in quantities exceeding the appropriate limit in paragraph (1) if the only food with which that plastic material or article may come into contact is food to which regulation 9(5) applies.

(3) For plastic materials or articles brought or intended to be brought into contact with food for infants and young children the migration limits referred to in paragraph (1) shall always be applied in mg/kg.

Required standard for non-migration of constituents of additives

7.—(1) Subject to paragraphs (2) and (3), where a migration limit expressed in mg/kg is indicated in column 4 of Section A or B of Annex III in relation to any additive, a plastic material or article manufactured containing that additive meets the required standard under this regulation if it is not capable of transferring constituents of that additive to food with which the plastic material or article may come into contact in quantities exceeding the appropriate limit, and for the purposes of this paragraph the appropriate limit is —

(a) the number of milligrams indicated in column 4 released per kilogram of food in the case of any plastic material or article other than one specified in sub-paragraph (b); and

(b) one sixth of the number of milligrams expressed in column 4 per square decimetre of surface area of the plastic material or article if the plastic material or article comprises —

(i) an article which is a container or is comparable to a container or can be filled, having a capacity of less than 500 millilitres or more than 10 litres, or

(ii) sheet, film or other plastic material or article which cannot be filled or for which it is impracticable to estimate the relationship between the surface area of the material or article in question and the quantity of food in contact with that surface area.

(2) A plastic material or article manufactured containing an additive for which a migration limit in mg/kg is expressed in column 4 of Section A or B of Annex III is not deemed to be capable of transferring constituents of that additive to food with which the plastic material or article may come into contact in quantities exceeding the appropriate limit in paragraph (1) if the only food with which that plastic material or article may come into contact is food to which regulation 9(5) applies.

(3) For plastic materials or articles brought or intended to be brought into contact with food for infants and young children the migration limits referred to in paragraph (1) must always be applied in mg/kg.

Required standard for products obtained by bacterial fermentation

8.  A product obtained by bacterial fermentation meets the required standard under this regulation if it is —

(a) of good technical quality;

(b) identified by PM/REF No, CAS No and name in columns 1, 2 and 3 respectively of Annex IV; and

(c) in compliance with the restrictions and specifications set out in column 4 of that Annex.

Required standards relating to overall migration limits

9.—(1) Subject to paragraph (5), a plastic material or article meets the required standard under this regulation if it is not capable of transferring its constituents to food with which it may come into contact in quantities exceeding the appropriate limit specified in paragraphs (2) to (4).

(2) Subject to paragraph (4), in the case of any plastic material or article comprising —

(a) an article which is a container or comparable to a container or can be filled, with a capacity of less than 500 millilitres or more than 10 litres; or

(b) sheet, film or any other material or article which cannot be filled or for which it is impracticable to estimate the relationship between the surface area of such material or article and the quantity of food in contact with it,

the appropriate limit is an overall migration limit of 10 milligrams per square decimetre of the surface area of the plastic material or article.

(3) In the case of any other plastic material or article, the appropriate limit is an overall migration limit of 60 milligrams of the constituents released per kilogramme of food or food simulant.

(4) For plastic materials or articles intended to be brought into contact or already in contact with food intended for infants and young children, the appropriate limit is always that specified in paragraph (3).

(5) For the purposes of this regulation a plastic material or article is not deemed to fail to meet the required standard under paragraph (1) if the only food with which that material or article may come into contact is food —

(a) which is specified in the table to Part 4 of Schedule 3; and

(b) where there is no “X” placed anywhere in the group of columns headed “Simulants to be used” opposite that food.

(6) In any proceedings for an offence under these Regulations where it is alleged that a plastic material or article does not comply with this regulation, the defence available in paragraph 10(2) of Schedule 2 is available as specified in that paragraph.

Required standard for non-migration of primary aromatic amines

10.—(1) Subject to paragraph (4), a plastic material or article manufactured using primary aromatic amines meets the required standard under this regulation if it is not capable of transferring such amines (expressed as aniline) in a detectable quantity to food with which that plastic material or article may come into contact

(2) Part B of Annex V has effect for the purpose of prescribing, for certain items listed in Section A or B of Annex II, Section A or B of Annex III, or Annex IV, the specifications for those items that are referred to in column 4 of the Annex or Section of Annex concerned.

(3) For the purposes of paragraph (1) a detectable quantity means at least 0.01 milligrams per kilogram of food or food simulant.

(4) The requirement in paragraph (1) does not apply to primary aromatic amines listed in the Directive.

Required standard relating to plastic multi-layer materials and articles

11.—(1) Subject to paragraph (2), a plastic multi-layer material or article meets the required standard if each layer of which it is composed complies with these Regulations.

(2) A layer which is not in direct contact with food and is separated from such contact by a plastic functional barrier is not obliged to comply with the requirements of these Regulations provided that —

(a) the finished material or article complies with the relevant specific and overall migration limits; and

(b) if any substance used in the manufacture of the layer is not included in the Directive or in the provisional list or the national lists referred to in that Directive, that substance meets the requirements of paragraphs (3) and (4).

(3) A substance mentioned in paragraph (2)(b) must not belong to the category of those classified —

(a) as proved or suspect “carcinogenic”, “mutagenic” or “toxic to reproduction” substances in Annex I to Directive 67/548/EEC(13), or

(b) under the self-responsibility criteria as “carcinogenic”, “mutagenic” or “toxic to reproduction” substances according to the rules of Annex VI to that Directive.

(4) The migration of a substance mentioned in paragraph (2)(b) into a food or simulant must not exceed 0.01 mg/kg, measured and expressed in accordance with the requirements and specifications contained in Article 7a(3) of the Directive.

Provisions relating to the use of certain epoxy derivatives (BADGE, BDGE and NOGE)

12.—(1) In this regulation —

(a) any reference to a numbered Article is a reference to that Article in Regulation1895/2005;

(b) paragraphs (2) to (5) are subject to Article 1(3) (exception relating to certain storage containers and pipelines); and

(c) for the purpose of Article 6(4) (requirement to disclose date of filling) the competent authority is the authority identified in regulation 15.

(2) Subject to Article 6(1), (2) (transitional provisions) and (4) (labelling requirements), no person may —

(a) manufacture,

(b) use for the handling of food in the course of a business,

(c) sell for the purpose of the handling of food, or

(d) import for the purpose of the handling of food

any material or article in contravention of Article 3 or Article 4 (prohibitions relating to BFDGE and NOGE respectively).

(3) No person may manufacture any material or article in such a way as to contravene the requirements of Article 2 (controls on the migration of BADGE from materials and articles).

(4) Subject to Article 6(1), no person may —

(a) use for the handling of food in the course of a business,

(b) sell for the purpose of the handling of food, or

(c) import for the purpose of the handling of food

any material or article that has been manufactured in such a way as to contravene the requirements of Article 2.

(5) Subject to Article 6(3) (transitional provisions relating to materials and articles brought into contact with food before 1st January 2007), no person shall contravene or fail to comply with the requirements of Article 5 (obligations regarding the provision of a written statement when marketing materials or articles containing BADGE or its derivatives).

(6) No person shall without reasonable excuse fail to comply with a request made under Article 6(4).

Method of testing the capability of plastic materials or articles to transfer constituents, and methods of analysis

13.—(1) A plastic material or article is to be treated as capable of transferring constituents to food with which it may come into contact to the extent that such capability is established —

(a) in any case other than one to which sub-paragraph (b) or (c) applies, and subject to Article 8(4) of the Directive (which may be applied on compliance with the conditions stated therein), by the verification methods specified in Schedule 2 (including the analytical tolerances referred to in paragraph 12 of that Schedule) and Schedule 3;

(b) in any case where the extent to which vinyl chloride, as identified in Section A of Annex II, is capable of such transfer falls to be established, by the method referred to in regulation 9(2) of the 2007 Regulations; or

(c) in any case where the extent to which a phthalate listed in Section B of Annex III with PM reference number 74640, 74880, 74560, 75100 or 75105 is capable of such transfer falls to be established, by the method referred to in Article 8(5) of the Directive.

(2) In Schedules 2 and 3, references to migration or release of a substance are to be construed as references to the transfer of constituents to the food or simulant representing the food with which the substance may come into contact.

(3) The specific migration of a constituent from a plastic material or article, where applicable, is to be determined in the manner specified in the relevant sub-paragraph of paragraph 8 of Annex II.

(4) The quantity of a constituent in a plastic material or article, where applicable, is to be determined in the manner specified in the sub-paragraph of paragraph 8 of Annex II relating to the term “QM(T)”, “QMA(T)” or, as the case may be, “QMA”.

Labelling and documentation

14.—(1) At marketing stages other than the retail stage a person who places on the market any plastic material or article or any substance intended for the manufacture of a plastic material or article must ensure that the plastic material or article or substance is accompanied by a written declaration which —

(a) accords with Article 16(1) of Regulation (EC) No. 1935/2004;

(b) contains the information specified in Schedule 4.; and

(c) complies with paragraph (2).

(2) A written declaration made under paragraph (1) must be revised when substantial changes in the production of a plastic material or article for which the declaration is issued bring about changes in the migration or when new scientific information is available.

(3) A person mentioned in paragraph (1) must make available to the enforcement authority on request appropriate documentation to demonstrate that the plastic material or article or substance intended for its manufacture complies with the requirements of these Regulations.

(4) The documentation referred to in paragraph (3) must contain the conditions and results of testing, calculations, other analysis, and evidence on the safety or reasoning demonstrating compliance.

PART 3 Execution and Enforcement

Enforcement

15.  Each food authority in its area and each port health authority in its district must execute and enforce —

(a) the provisions of Regulation 1895/2005 mentioned in regulation 12, and

(b) these Regulations.

Offences and Penalties

16.—(1) Any person who —

(a) contravenes or fails to comply with regulation 3(1), 4(1), 5(1), 12(2) to (5) or 14(1);

(b) intentionally obstructs any person acting in the execution of Regulation 1895/2005 or these Regulations;

(c) contravenes regulation 12(6), 14(3) or 21(3) or, without reasonable excuse, otherwise fails to give to any person acting in the execution of Regulation 1895/2005 or these Regulations any assistance or information which that person may reasonably require; or

(d) in purported compliance with any requirement mentioned in sub-paragraph (c), knowingly or recklessly supplies information that is false or misleading in any material particular,

is guilty of an offence.

(2) Anyone guilty of an offence under these Regulations is liable —

(a) in the case of an offence under paragraph (1)(a) or (d) —

(i) on conviction on indictment to a term of imprisonment not exceeding two years or to a fine or both;

(ii) on summary conviction to a term of imprisonment not exceeding six months or to a fine not exceeding the statutory maximum or both;

(b) in the case of any other offence under these Regulations on summary conviction to a term of imprisonment not exceeding three months or to a fine not exceeding level five on the standard scale or both.

(3) Nothing in paragraph (1)(c) is to be construed as requiring any person to answer any question or give any information if to do so might incriminate that person.

Offences by corporate bodies or Scottish partnerships

17.—(1) Where an offence under these Regulations which has been committed by a body corporate is proved to have been committed with the consent or connivance of or to be attributable to any neglect on the part of —

(a) any director, manager, secretary or other similar officer of the body corporate, or

(b) any person purporting to act in such a capacity,

that individual as well as the body corporate will be deemed to be guilty of that offence and liable to be proceeded against and punished accordingly.

(2) Where an offence under these Regulations which has been committed by a Scottish partnership is proved to have been committed with the consent or connivance of or to be attributable to any neglect on the part of a partner, that partner as well as the partnership will be deemed to be guilty of that offence and liable to be proceeded against and punished accordingly.

Time limit for prosecutions

18.  No prosecution for an offence under these Regulations will be commenced until after the expiry of three years from the commission of the offence or one year from its discovery by the prosecutor, whichever is the earlier.

Offences due to the act or default of a third party

19.  Where the commission by a person (A) of an offence under these Regulations is due to the act or default of some other person (B), person B is guilty of the offence and may be charged with and convicted of the offence whether or not proceedings are taken against person A.

Defence of exercising due diligence etc

20.—(1) In any proceedings for an offence under these Regulations it is, subject to paragraph (5), a defence to prove that the person accused (“the accused”) took all reasonable precautions and exercised all due diligence to avoid the commission of the offence by the accused or by a person under the control of the accused.

(2) Without prejudice to the generality of paragraph (1), a person accused of an offence under these Regulations who did not —

(a) prepare the plastic material or article or, as the case may be, the material or article in respect of which the offence is alleged to have been committed; nor

(b) import it into the United Kingdom,

shall be taken to have established the defence provided by paragraph (1) if the requirements of paragraphs (3) and (4) are satisfied.

(3) The requirements of this paragraph are satisfied if it is proved that —

(a) the commission of the offence was due to the act or default of some other person who was not under the control of the accused, or to reliance on information supplied by such a person;

(b) either —

(i) the accused carried out all such checks of the plastic material or article or material or article in question as were reasonable in all the circumstances, or

(ii) it was reasonable in all the circumstances for the accused to rely on checks carried out by the person who supplied the plastic material or article or the material or article in question; and

(c) the accused did not know and had no reason to suspect at the time the offence was committed that the act or omission would amount to an offence under these Regulations.

(4) The requirements of this paragraph are satisfied if the offence is one of sale and it is proved that —

(a) the commission of the offence was due to the act or default of some other person who was not under the control of the accused, or to reasonable reliance on information supplied by such a person;

(b) the sale of which the alleged offence consisted was not a sale under the name or mark of the accused; and

(c) the accused did not know and could not reasonably have been expected to know at the time the offence was committed that the act or omission would amount to an offence under these Regulations.

(5) If in any case the defence provided by this regulation involves the allegation that the commission of the offence was due to the act or default of another person, or to reliance on information supplied by another person, the accused must not without leave of the court be entitled to rely on that defence unless —

(a) at least seven clear days before the hearing; and

(b) where the accused has previously appeared before the court in connection with the alleged offence, within one month of the first such appearance,

the accused has served on the prosecutor a written notice giving such information identifying or assisting in the identification of that other person as was then in the possession of the accused.

(6) For the purposes of paragraph (2), “prepare” includes manufacture or subject to any form of treatment or process.

Transitional defence relating to PVC gaskets containing epoxidised soybean oil

21.—(1) In any proceedings for an offence under regulation 3 concerning the sale of a glass jar —

(a) which contains

(i) infant formulae or follow-on formulae as defined by Commission Directive 2006/141/EC(14), or

(ii) processed cereal-based foods or baby foods for infants and young children as defined by Commission Directive2006/125/EC(15), and

(b) the lid of which is sealed by means of a PVC gasket containing epoxidised soybean oil having PM/Ref No. 88640 in Section A of Annex III,

it is a defence to prove the matters set out in paragraph (2).

(2) The matters to be proved are that —

(a) the PVC gasket mentioned in paragraph (1)(b) was compliant with the relevant restrictions and specifications in column 4 at Item 259A of Part 1 of Schedule 2 to the Plastic Materials and Articles in Contact with Food Regulations 1998(16);

(b) the glass jar was filled and sealed before 19th November 2006;

(c) the date of filling or a coded indication of that date was present on the jar or its lid at the time of sale; and

(d) the labelling or marking with the particulars mentioned in sub-paragraph (c) at the time of sale complied with the requirements relating to durability in Article 2(1)(a) of Directive 2000/13/EC of the European Parliament and of the Council(17).

(3) A person may not without reasonable excuse fail to comply with a request made by the enforcement authority to disclose the date signified by the coded indication mentioned in paragraph (2)(c).

Procedure where a sample is to be analysed

22.—(1) An authorised officer who has procured a sample under section 29 of the Act and who considers it should be analysed must divide the sample into three parts.

(2) If the sample consists of sealed containers and opening them would, in the opinion of the authorised officer, impede a proper analysis, the authorised officer must divide the sample into parts by putting the containers into three lots, and each lot must be treated as being a part.

(3) The authorised officer must —

(a) if necessary place each part in a suitable container and seal it;

(b) mark each part or container;

(c) as soon as reasonably practicable, give one part to the owner and notify the owner in writing that the sample will be analysed;

(d) submit one part for analysis in accordance with section 30 of the Act; and

(e) retain one part for future submission under regulation 23.

Secondary analysis by the Government Chemist

23.—(1) Where a sample has been retained under regulation 22 and —

(a) proceedings are intended to be or have been commenced against a person for an offence under these Regulations; and

(b) the prosecution intends to adduce as evidence the result of the analysis mentioned above,

paragraphs (2) to (7) apply.

(2) The authorised officer —

(a) may of the officer’s own volition; or

(b) must —

(i) if requested by the prosecutor (if a person other than the authorised officer);

(ii) if the court so orders; or

(iii) (subject to paragraph (6)) if requested by the defendant,

send the retained part of the sample to the Government Chemist for analysis.

(3) The Government Chemist must analyse the part sent under paragraph (2) and send to the authorised officer a certificate specifying the results of the analysis.

(4) Any certificate of the results of analysis sent by the Government Chemist must be signed by or on behalf of the Government Chemist, but the analysis may be carried out by any person under the direction of the person who signs the certificate.

(5) The authorised officer must immediately on receipt supply the prosecutor (if a person other than the authorised officer) and the defendant with a copy of the Government Chemist’s certificate of analysis.

(6) Where a request is made under paragraph (2)(b)(iii) the authorised officer may give notice in writing to the defendant requesting payment of a fee specified in the notice to defray some or all of the Government Chemist’s charges for performing the functions under paragraph (3), and in the absence of agreement by the defendant to pay the fee specified in the notice the authorised officer may refuse to comply with the request.

(7) In this regulation “defendant” includes a prospective defendant.

PART 4 General and Supplementary

Application of provisions of the Act

24.  The following provisions of the Act apply for the purposes of these Regulations as they apply for the purposes of the Act —

(a) section 3 (presumption that food is intended for human consumption);

(b) section 30(8) (relating to documentary evidence);

(c) section 44 (protection of officers acting in good faith).

Amendment of the Food Safety (Sampling and Qualifications) Regulations 1990

25.  In the Food Safety (Sampling and Qualifications) Regulations 1990(18), in Schedule 1 (provisions to which those Regulations do not apply) for the title and reference of the Plastic Materials and Articles in Contact with Food (Wales) (N0.2) Regulations 2008 substitute the title and reference of these Regulations.

Amendments to the Materials and Articles in Contact with Food (Wales) Regulations 2007

26.—(1) The 2007 Regulations are amended in accordance with paragraphs (2) to (4).

(2) In regulation 2(1) —

(a) omit the definition of “the 2008 Regulations”;

(b) after the definition of “the Act” insert the following definition —

““the 2009 Regulations” means the Plastic Materials and Articles in Contact with Food (Wales) Regulations 2009(19);”.

(3) In regulation 10, in paragraph (4) for “2008” substitute “2009”.

(4) In regulation 11, in paragraph (5), for “2008” substitute “2009”.

Revocations

27.  The following Regulations or parts thereof are revoked —

• The Plastic Materials and Articles in Contact with Food (Wales) (No.2) Regulations 2008(20);

Gwenda Thomas

Under the authority of the Minister for Health and Social Services, one of the Welsh Ministers

4 March 2009