Search Legislation

The Official Controls and Phytosanitary Conditions (Amendment) Regulations 2021

 Help about what version

What Version

 Help about advanced features

Advanced Features

Changes over time for: The Official Controls and Phytosanitary Conditions (Amendment) Regulations 2021

 Help about opening options

Changes to legislation:

There are currently no known outstanding effects for the The Official Controls and Phytosanitary Conditions (Amendment) Regulations 2021. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.

Statutory Instruments

2021 No. 136

Plant Health

The Official Controls and Phytosanitary Conditions (Amendment) Regulations 2021

Made

10th February 2021

Laid before Parliament

11th February 2021

Coming into force

4th March 2021

The Secretary of State, in exercise of the powers conferred by Articles 41(3) and 105(6) of Regulation (EU) 2016/2031 of the European Parliament and of the Council on protective measures against pests of plants M1 (“the Plant Health Regulation”), and Articles 22(2) and (3) and 144(6) of Regulation (EU) 2017/625 of the European Parliament and of the Council on official controls and other official activities performed to ensure the application of food and feed law, rules on animal health and welfare, plant health and plant protection products M2 (“the Official Controls Regulation”) makes the following Regulations.

The Scottish Ministers and the Welsh Ministers M3 have consented to the Secretary of State making these regulations for the purposes of Article 2a(2) of the Plant Health Regulation, and Article 3(2B) of the Official Controls Regulation.

The Secretary of State has consulted in accordance with Article 144(7) of the Official Controls Regulation, during the preparation and evaluation of Part 2 of these Regulations.

Marginal Citations

M1EUR 2016/2031 amended by S.I. 2020/1482.

M2EUR 2017/625, amended by S.I. 2020/1481, there are other amending instruments but none is relevant.

M3Article 2a(2) of EUR 2016/2031, and Article 3(2B) of EUR 2017/625 contain definitions of “the appropriate authority” as regards the making of regulations and consent from Welsh Ministers and Scottish Ministers.

PART 1 E+W+SCitation, commencement and extent

Citation, commencement and extentE+W+S

1.—(1) These Regulations may be cited as the Official Controls and Phytosanitary Conditions (Amendment) Regulations 2021 and come into force on 4th March 2021.

(2) These Regulations extend to England and Wales, and Scotland.

Commencement Information

I1Reg. 1 in force at 4.3.2021, see reg. 1(1)

PART 2 E+W+SPlaces of destination

Introductory and interpretationE+W+S

2.—(1) This Part applies in relation to the importation of specified goods—

(a)for the duration of the transitional staging period [F1falling on or after 4th March 2021], and

(b)for the purpose of supplementing and modifying the transitional derogations and modifications specified in Article 168 of, and Annex 6 M4 to the Official Controls Regulation.

[F2(2) Those transitional derogations and modifications have effect in relation to the importation of Solanum tuberosum L (ware potatoes) as if, in the definition of “territory subject to special transitional import arrangements” in paragraph 2 of Annex 6, in paragraph (b), for sub-paragraphs (i) to (iii) there were substituted—

(i)Poland;

(ii)Portugal;

(iii)Romania:

(iv)Spain;]

(3) In this Part—

(a)importation” means bringing goods into Great Britain from a relevant third country, and cognate terms are to be construed accordingly;

(b)the Official Controls Regulation” means Regulation (EU) 2017/625 of the European Parliament and of the Council on official controls and other official activities performed to ensure the application of food and feed law, rules on animal health and welfare, plant health and plant protection products;

(c)relevant third country” has the meaning given by Annex 6 to the Official Controls Regulation;

(d)specified goods” means plants, plant products and other objects specified in the Schedule;

(e)transitional staging period” has the meaning given by Annex 6 to the Official Controls Regulation.

Textual Amendments

Commencement Information

I2Reg. 2 in force at 4.3.2021, see reg. 1(1)

Marginal Citations

M4Article 168 was inserted into Regulation (EU) 2017/625 by regulation 28 of S.I. 2020/1481 and provides for the provisions of Regulation (EU) 2017/625 to apply subject to the transitional derogations and modifications specified in Annex 6.

Official controls on specified goods at the place of destinationE+W+S

3.—(1) An importer of specified goods must ensure that the goods are presented to the competent authority at the place of destination to enable official control checks to be carried out.

(2) In order to reduce the risk of the spread of any pest, or infestation with or contamination by any pest, an importer of specified goods must at all times during their transportation to, and storage at, the place of destination, ensure that the goods remain sealed, and are not tampered with or subject to any alteration or change of packaging.

(3) Before presenting a consignment of specified goods for official control checks in accordance with paragraph (1), the importer must provide pre-notification information in accordance with Article 56A M5 of the Official Controls Regulation.

(4) The operator in charge of the place of destination must ensure that the contents of a consignment of specified goods presented for official control checks in accordance with paragraph (1) neither leave the place of destination, nor are separated, before the competent authority determines that the consignment has passed the official control checks.

(5) Official control checks performed in accordance with this regulation include a documentary check, and, where the competent authority considers it appropriate (having regard to the extent of the risk to human, animal or plant health, animal welfare or, as regards plant protection products, the environment), may include identity checks and physical checks.

(6) In the event that the competent authority considers that physical checks at the place of destination are required, the competent authority must notify the importer.

(7) The operator in charge of a place of destination must ensure that the place of destination has access to suitable equipment for the anticipated type and volume of goods likely to require a physical check under paragraph (5), including--

(a)equipment for the weighing of consignments where its use is relevant to the inspection;

(b)equipment to unload, open and examine consignments for inspection, and

(c)cleansing and disinfecting equipment and instructions for use.

(8) In this regulation—

(a)the competent authority” has the meaning given by Article 3(3) of the Official Controls Regulation;

(b)importer”, in relation to any specified goods, means a person who is importing or has imported the goods;

(c)official control checks” means official controls within the meaning given by Article 2 of the Official Controls Regulation carried out on specified goods at the place of destination;

(d)“documentary check”, “identity check”, “operator”, and “physical check” have the meanings given by Article 3 of the Official Controls Regulation;

(e)pest” means any of the pests within the meaning given by Article 1(1) of Regulation (EU) 2016/2031 of the European Parliament and of the Council on protective measures against pests of plants;

(f)place of destination”, in relation to any specified goods, means the first place where the goods are delivered for unloading in Great Britain.

Commencement Information

I3Reg. 3 in force at 4.3.2021, see reg. 1(1)

Marginal Citations

M5Article 56A was inserted into Regulation (EU) 2017/625 by Annex 6. Annex 6 to Regulation (EU) 2017/625 was inserted by regulation 29(4) of S.I. 2020/1481 for the purpose of the application of and derogations from Regulation (EU) 2017/625, and modifications to its application, in relation to territories subject to special transitional import arrangements.

OffencesE+W+S

4.—(1) The Official Controls (Plant Health and Genetically Modified Organisms) (England) Regulations 2019 M6 have effect in relation to specified goods entering Great Britain from a relevant third country during the transitional staging period, subject to the following modifications.

(2) In regulation 2, after the definition of “Phytosanitary Conditions Regulation”, insert—

place of destination” in relation to any specified goods, means the first place where the goods are delivered for unloading in Great Britain, and for this purpose “specified goods” means plants, plant products and other objects specified in the Schedule to the Official Controls and Phytosanitary Conditions (Amendment) Regulations 2021 M7;.

(3) In Schedule 3, in Part 2—

(a)in the entry relating to Article 47(5), in the second column, at the end insert “ or place of destination or, where required, any other place specified in Article 44(3) ”;

(b)in the entry relating to Article 50(1), in the second column, at the end insert “ or place of destination or, where required, any other place specified in Article 44(3) ”;

(c)after the entry relating to Article 56(4)—

(i)in the first column, insert “ Article 56A ”;

(ii)in the second column, insert—

During the transitional staging period, requires the operators of relevant goods from a relevant third country, to give prior notification to the relevant competent authority before the expected time of arrival of the goods at a point of entry in Great Britain..

[F3(4) This regulation does not apply in relation to any part of the transitional staging period falling before 4th March 2021.]

Textual Amendments

Commencement Information

I4Reg. 4 in force at 4.3.2021, see reg. 1(1)

Marginal Citations

M6S.I. 2019/1517 amended by S.I. 2020/1482, there are other amending instruments but none is relevant.

PART 3 E+W+SAmendments to Commission Implementing Regulation (EU) 2019/2072

Amendments to Commission Implementing Regulation (EU) 2019/2072E+W+S

5.—(1) Annex 7 to Commission Implementing Regulation (EU) 2019/2072 establishing uniform conditions for the implementation of Regulation (EU) 2016/2031 of the European Parliament and the Council, as regards protective measures against pests of plants M8 is amended as follows.

(a)in Part A—

(i)in the section entitled “Interpretation”, after the definition of “EPPO PM 9/26” insert--

ISPM41” means International Standard for Phytosanitary Measures No 41 of April 2017 on international movement of used vehicles, machinery and equipment, prepared by the Secretariat of the IPPC established by the Food and Agriculture Organisation of the United Nations ;M9

(ii)in the table—

(aa)in the third column of entry 2, after “plant debris”, insert “ in accordance with ISPM41 ”;

(bb)in the third column of entry 3, in paragraph (b), after “infected area”, insert “ in accordance with ISPM41 ”.

(b)in the table in Part B, for entries 2 to 5 substitute—

2.  [F4Plants for planting, other than seeds, that belong to the genera and species listed in the list of Xylella host plants, other than those referred to in entries 3, 4 and 5 of this Table]Any third country

The plants must be accompanied by an official statement:

(a) that they have been grown during a period of at least three years before export, or in the case of plants which are younger than three years, have been grown throughout their life, in a country which, in accordance with the measures specified in ISPM4, is known to be free from Xylella fastidiosa (Wells et al.), or

(b) that they have been grown during a period of at least three years before export, or in the case of plants which are younger than three years have been grown throughout their life, in an area which has been established by the national plant protection organisation in accordance with ISPM4 as an area that is free from Xylella fastidiosa (Wells et al.), or

(c) in the case of plants which originate in an area* where Xylella fastidiosa (Wells et al.) is not known to be absent, an official statement:

(i) that the plants have been produced in a site **:

(aa) that is authorised by the national plant protection organisation in accordance with ISPM10 as a site that is free from Xylella fastidiosa (Wells et al.) and its vectors,

(bb) that is physically protected against the introduction of Xylella fastidiosa (Wells et al.) by its vectors,

(cc) that is surrounded by a zone with a width of 100 m which has been subject to official inspections twice a year, and where all of the plants found to be infected with, or to have symptoms of, Xylella fastidiosa (Wells et al.) have been immediately removed, and appropriate phytosanitary treatments against the vectors of Xylella fastidiosa (Wells et al.) have been applied before that removal,

(dd) that at appropriate times throughout the year, is subject to phytosanitary treatments to maintain freedom from the vectors of Xylella fastidiosa (Wells et al.), including the removal of plants,

(ee) that is subject annually, together with the zone referred to in point (cc), to at least two official inspections during the flight season of the vectors of Xylella fastidiosa (Wells et al.),

(ff) where throughout the production time of the plants, neither symptoms of Xylella fastidiosa (Wells et al.) nor its vectors were found in the site or, if suspect symptoms were observed, testing was carried out and the absence of Xylella fastidiosa (Wells et al.) confirmed, and

(gg) where throughout the production time of the plants, no symptoms of Xylella fastidiosa (Wells et al.) were found in the zone referred to in point (cc) or, if suspect symptoms were observed, testing was carried out and the absence of Xylella fastidiosa (Wells et al.) confirmed,

(ii) that representative samples of each species of the plants from the site have been subject to annual testing, at the most appropriate time, and the absence of Xylella fastidiosa (Wells et al.) has been confirmed on the basis of tests carried out in accordance with internationally validated testing methods,

(iii) that the plants have been transported in closed containers or packaging, to prevent infection with Xylella fastidiosa (Wells et al.) or any of its known vectors,

(iv) that as close to the time of export as is practically possible, the lots of the plants were subject to official visual inspection, sampling and molecular testing, carried out in accordance with internationally validated testing methods, using a sampling scheme able to identify with 99% reliability the level of presence of infected plants of 1%, that targets in particular plants displaying symptoms of Xylella fastidiosa (Wells et al.), and that confirmed the absence of Xylella fastidiosa (Wells et al.), and

(v) that immediately before export, the lots of the plants were subject to phytosanitary treatments against any known vectors of Xylella fastidiosa (Wells et al.), or

(d) in the case of plants which originate in an area where Xylella fastidiosa (Wells et al.) is not known to be absent, and which have been grown for their entire production cycle in vitro, an official statement:

(i) that the plants have been grown in a site** of production

(aa) that is authorised by the national plant protection organisation in the country of origin in accordance with ISPM10 as a site of production that is free from Xylella fastidiosa (Wells et al.) and its vectors,

(bb) that is physically protected against the introduction of Xylella fastidiosa (Wells et al.) by its vectors,

(cc) that is subjected annually to at least two official inspections carried out at appropriate times, and

(dd) where throughout the production time of the plants, neither symptoms of Xylella fastidiosa (Wells et al.) nor its vectors were found in the site or, if suspect symptoms were observed, testing was carried out, and the absence of Xylella fastidiosa (Wells et al.) confirmed,

(ii) that the plants have been transported under sterile conditions in a transparent container that precludes the possibility of infection by Xylella fastidiosa (Wells et al.) through its vectors, and

(iii) that the plants have been grown from seeds, propagated under sterile conditions from mother plants which have spent their entire lives in an area free from Xylella fastidiosa (Wells et al.) and have been tested and found free from Xylella fastidiosa (Wells et al.), or have been propagated under sterile conditions from mother plants which meet the requirements in point (c)(i) and have been tested and found free from Xylella fastidiosa (Wells et al.).

A phytosanitary certificate may not include the official statement referred to in (a) unless the national plant protection organisation of the country of origin has previously notified the national plant protection organisation of the United Kingdom of this information in writing.

* The name of the area(s) must be included in the phytosanitary certificate under the heading “Additional declaration”.

** The name of the site(s) must be included in the phytosanitary certificate under the heading “Additional declaration”.

3. Plants intended for planting other than seeds, of Coffea sp. and Polygala myrtifolia L.Any third country

The plants must be accompanied by an official statement:

(a) that they have been grown during a period of at least three years before export, or in the case of plants which are younger than three years, have been grown throughout their life in a country which, in accordance with the measures specified in ISPM4, is known to be free from Xylellafastidiosa (Wells et al.), and

(b) that they have been grown in a site that is subject to annual official inspection, with sampling and testing carried out at the appropriate times for the presence of Xylellafastidiosa (Wells et al.) and in accordance with international standards, using a sampling scheme which is able to identify with 99% reliability a level of presence of infected plants of 5%, and in which the absence of Xylellafastidiosa (Wells et al.) was confirmed, and

(c) in the case of plants of Polygala myrtifolia L. intended for planting, other than seeds, that before their movement out of their production site and as close to that time as practically possible, each lot of plants was subjected in addition to official visual inspection and sampling, as well as testing, in line with international standards for the presence of Xylella fastidiosa (Wells et al.), using a sampling scheme which is able to identify with 99% reliability a level of presence of infected plants of 5%, and in which the absence of Xylella fastidiosa (Wells et al.) was confirmed.

A phytosanitary certification may not include the official statement referred to in (a) unless the national plant protection organisation of the country of origin has previously notified the national plant protection organisation of the United Kingdom of this information in writing.

4. Plants intended for planting other than seeds, of Lavandula sp. L., Nerium oleander L. and Salvia Rosmarinus (Spenner)Any third country

The plants must be accompanied by an official statement:

(a) that they have been grown:

(i) during a period of at least three years before export, or in the case of plants which are younger than three years, have been grown throughout their life, in a country which, in accordance with the measures specified in ISPM4, is known to be free from Xylella fastidiosa (Wells et al.), and

(ii) in a site that is subject to annual official inspection, with sampling and testing carried out at the appropriate times on those plants for the presence of Xylella fastidiosa (Wells et al.) and in accordance with international standards, using a sampling scheme able to identify with 99% reliability a level of presence of infected plants of 5%, in which the absence of Xylella fastidiosa (Wells et al.) was confirmed, or

(b) in the case of plants, other than unrooted cuttings that:

(i) the plants have been grown in a place of production which has been registered and supervised by the national plant protection organisation for a period of at least one year before the export of the plants,

(ii) the place of production, together with a 200m zone surrounding the place of production, is known to be free from Xylella fastidiosa (Wells et al.) on the basis of official inspections, which included testing where appropriate, that was carried out at appropriate times;

(iii) the plants have been subjected to an annual official inspection at an appropriate time, which included sampling and testing, that confirmed the absence of Xylella fastidiosa (Wells et al.) and was carried out in accordance with international standards using a sampling scheme able to identify with 99% reliability a level of presence of infected plants of 5%,

(iv) immediately before their export, the plants were subjected to an official visual inspection for the presence of Xylella fastidiosa (Wells et al.) and, where any symptoms giving rise to a suspicion of its presence were observed, were tested in line with international standards for its presence, confirming its absence,

(v) where there has been any evidence of the presence of the vector of Xylella fastidiosa (Wells et al.) at the place of production, chemical and cultural controls have been used to suppress the vector, and

(vi) the plants have been grown throughout their life under complete physical protection, and appropriate hygiene measures have been implemented at the place of production to ensure that Xylella fastidiosa (Wells et al.) is not transmitted by tools or equipment,

(c) in the case of unrooted cuttings, that they derive from mother plants which were grown in accordance with the requirements specified in paragraph (a) or (b), or

(d) in the case of plants which originate in an area where Xylella fastidiosa (Wells et al.) is not known to be absent and which have been grown for their entire production cycle in vitro:

(i) that the plants have been grown in a site** of production:

(aa) that is authorised by the national plant protection organisation in the country of origin in accordance with ISPM10 as a site of production that is free from Xylella fastidiosa (Wells et al.) and its vectors,

(bb) that is physically protected against the introduction of Xylella fastidiosa (Wells et al.) by its vectors,

(cc) that is subjected annually to at least two official inspections carried out at appropriate times, and

(dd) where, throughout the production time of the plants, no symptoms of Xylella fastidiosa (Wells et al.) or its vectors were found in the site or, if suspect symptoms were observed, testing was carried out, and the absence of Xylella fastidiosa (Wells et al.) confirmed,

(ii) that the plants have been transported under sterile conditions in a transparent container that precludes the possibility of infection by Xylella fastidiosa (Wells et al.) through its vectors, and

(iii) that the plants have been grown under sterile conditions:

(aa) from seeds,

(bb) from mother plants which meet the requirements set out in (a), or

(cc) from mother plants which meet the requirements set out in (b).

A phytosanitary certificate may not include the official statement referred to in (a) unless the national plant protection organisation of the country of origin has previously notified the national plant protection organisation

of the United Kingdom of this information in writing.

A phytosanitary certificate may not include the official statement referred to in (b) unless the national plant protection organisation of the country of origin has previously provided the national plant protection organisation of the United Kingdom with written details of the place(s) of production.

A phytosanitary certificate may not include the official statement referred to in (c) unless the national plant protection organisation of the country of origin has previously provided the national plant protection organisation of the United Kingdom with written details of the place(s) of production.

A phytosanitary certificate may not include the official statement referred to in (d) unless the national plant protection organisation of the country of origin has previously provided the national plant protection organisation of the United Kingdom with written details of the site(s) of production.

5. Plants intended for planting other than seeds and plants grown for their entire production cycle in vitro, of Olea europaea L. and Prunus dulcis (Mill.) D.A. WebbAny third country

The plants must be accompanied by an official statement:

(a) that they have been grown:

(i) during a period of at least three years before export, or in the case of plants which are younger than three years, throughout their life, in a country which, in accordance with the measures specified in ISPM4, is known to be free from Xylella fastidiosa (Wells et al.), and

(ii) in a site that is subject to annual official inspection, with sampling and testing carried out at the appropriate times for the presence of Xylella fastidiosa (Wells et al.) and in accordance with international standards, using a sampling scheme able to identify with 99% reliability a level of presence of infected plants of 5%, in which the absence of Xylella fastidiosa (Wells et al.) was confirmed, or

(b) that:

(i) the plants have been grown in a place of production which has been registered and supervised by the national plant protection organisation for a period of at least one year before the export of the plants,

(ii) the place of production, together with a 200m zone surrounding the place of production, is known to be free from Xylella fastidiosa (Wells et al.) on the basis of official inspections, which included testing where appropriate, carried out at appropriate times during the 12 months before the export of the plants,

(iii) the plants have been subjected to an annual official inspection at an appropriate time, which included sampling and testing, that confirmed the absence of Xylella fastidiosa (Wells et al.) and was carried out in accordance with international standards using a sampling scheme able to identify with 99% reliability a level of presence of infected plants of 1%,

(iv) immediately before their export, the plants were subjected to an official visual inspection for the presence of Xylella fastidiosa (Wells et al.) and, where any symptoms giving rise to a suspicion of its presence were observed, were tested in line with international standards for its presence, confirming its absence, and

(v) where the place of production of the plants is located in an area where Xylella fastidiosa (Wells et al.) is known to occur, the plants have been grown under complete physical protection for a period of at least four years before their export or, in the case of plants which are younger than four years, throughout their life,

or

(c) in the case of plants which originate in an area where Xylella fastidiosa (Wells et al.) is not known to be absent and have been grown for their entire production cycle in vitro, an official statement:

(i) that the plants have been grown in a site** of production:

(aa) that is authorised by the national plant protection organisation in the country of origin in accordance with ISPM10 as a site of production that is free from Xylella fastidiosa (Wells et al.) and its vectors,

(bb) that is physically protected against the introduction of Xylella fastidiosa (Wells et al.) by its vectors,

(cc) that is subjected annually to at least two official inspections carried out at appropriate times, and

(dd) where, throughout the production time of the plants, no symptoms of Xylella fastidiosa (Wells et al.) or its vectors were found in the site or, if suspect symptoms were observed, testing was carried out, and the absence of Xylella fastidiosa (Wells et al.) confirmed,

(ii) that the plants have been transported under sterile conditions in a transparent container that precludes the possibility of infection by Xylella fastidiosa (Wells et al.) through its vectors, and

(iii) that the plants have been grown under sterile conditions:

(aa) from seeds, or

(bb) from mother plants which meet the requirements set out in (a), or

(cc) from mother plants which meet the requirements set out in (b).

A phytosanitary certificate may not include the official statement referred to in (a) unless the national plant protection organisation of the country of origin has previously notified the national plant protection organisation of the United Kingdom of this information in writing.

A phytosanitary certificate may not include the official statement referred to in (b) unless the national plant protection organisation of the country of origin has previously provided the national plant protection organisation of the United Kingdom with written details of the place(s) of production.

Plants meeting the requirements of the official statement referred to in (b) should be individually labelled with a tamper proof label or other secure seal that cannot be re-used, is readable and undamaged, and gives the detail of the place of production, and the place of production should also be indicated on the phytosanitary certificate.

A phytosanitary certificate may not include the official statement referred to in (c) unless the national plant protection organisation of the country of origin has previously provided the national plant protection organisation of the United Kingdom with written details of the site(s) of production.

Textual Amendments

Commencement Information

I5Reg. 5 in force at 4.3.2021, see reg. 1(1)

Marginal Citations

M8Annex 7 of EUR 2019/2072 was substituted by Schedule 7 to S.I. 2020/1527.

M9Available from the IPPC Secretariat AGPP-FAO, Viale Delle Terme di Caracalla, 00153, Rome, Italy and at https://www.ippc.int/int.

Gardiner of Kimble

Parliamentary Under Secretary of State

Department for Environment, Food and Rural Affairs

Regulation 2(3)

SCHEDULEE+W+SList of plants, plant products and other objects which are “specified goods”

1.  Machinery and vehicles which have been operated for agricultural or forestry purposes.E+W+S

Commencement Information

I6Sch. para. 1 in force at 4.3.2021, see reg. 1(1)

2.  Plants for planting, other than seeds.E+W+S

Commencement Information

I7Sch. para. 2 in force at 4.3.2021, see reg. 1(1)

3.  Tubers of Solanum tuberosum L. intended for planting (seed potatoes).E+W+S

Commencement Information

I8Sch. para. 3 in force at 4.3.2021, see reg. 1(1)

4.  Tubers of Solanum tuberosum L. (ware potatoes).E+W+S

Commencement Information

I9Sch. para. 4 in force at 4.3.2021, see reg. 1(1)

5.  Seeds of—E+W+S

(a)Allium cepa L.,

(b)Allium porrum L.,

(c)Castanea Mill.,

(d)Capsicum spp. L.,

(e)Helianthus annuus L.,

(f)Medicago sativa L.,

(g)Phaseolus cocineus.,

(h)Phaseolus vulgaris L.,

(i)Solanum lycopersicum L.,

(j)Solanum tuberosum L. (True potato seed).

Commencement Information

I10Sch. para. 5 in force at 4.3.2021, see reg. 1(1)

6.  Vegetable seeds of Pisum sativum L. and Vicia faba L.E+W+S

Commencement Information

I11Sch. para. 6 in force at 4.3.2021, see reg. 1(1)

7.  Seeds of oil and fibre plants of—E+W+S

(a)Brassica napus L.,

(b)Brassica rapa L.,

(c)Sinapis alba L.,

(d)Glycine max (L.) Merrill,

(e)Linum usitatissimum L.

Commencement Information

I12Sch. para. 7 in force at 4.3.2021, see reg. 1(1)

8.  Isolated bark of—E+W+S

(a)Castanea Mill.,

(b)Conifers (Pinales),

(c)Juglans L.,

(d)Pterocarya Kunth.

Commencement Information

I13Sch. para. 8 in force at 4.3.2021, see reg. 1(1)

9.  Wood of Platanus L., including wood which has not kept its natural round surface.E+W+S

Commencement Information

I14Sch. para. 9 in force at 4.3.2021, see reg. 1(1)

10.  Wood of Castanea Mill., excluding wood which is bark-free.E+W+S

Commencement Information

I15Sch. para. 10 in force at 4.3.2021, see reg. 1(1)

11.  Wood of Conifers (Pinales), including wood which has not kept its natural round surface.E+W+S

Commencement Information

I16Sch. para. 11 in force at 4.3.2021, see reg. 1(1)

12.  Wood of Prunus L., including wood which has not kept its natural round surface, other than wood of Prunuslaurocerasus L.E+W+S

Commencement Information

I17Sch. para. 12 in force at 4.3.2021, see reg. 1(1)

13.  Wood, including wood which has not kept its natural round surface of—E+W+S

(a)Acer L.,

(b)Aesculus L.,

(c)Alnus L.,

(d)Betula L.,

(e)Carpinus L.,

(f)Cercidiphyllum Siebold & Zucc.,

(g)Corylus L.,

(h)Fagus L.,

(i)Fraxinus L.,

(j)Koelreuteria Medikus.,

(k)Platanus L.,

(l)Populus L.,

(m)Salix L.,

(n)Tilia L.,

(o)Ulmus L.

Commencement Information

I18Sch. para. 13 in force at 4.3.2021, see reg. 1(1)

14.  Wood of Juglans L. and Pterocarya Kunth.E+W+S

Commencement Information

I19Sch. para. 14 in force at 4.3.2021, see reg. 1(1)

Explanatory Note

(This note is not part of the Regulations)

Part 2 of these Regulations makes provision to supplement Regulation (EU) 2017/625 of the European Parliament and of the Council on official controls and other official activities performed to ensure the application of food and feed law, rules on animal health and welfare, plant health and plant protection products (“the Official Controls Regulation”). Specifically, it supplements (and modifies) the transitional derogations and modifications specified in Article 168 of, and Annex 6 to, the Official Controls Regulation, by providing for official controls that are carried out under the Official Controls Regulation on certain goods listed in the Schedule to the Regulations to be carried out at the place of destination (as defined).

Part 2 of these Regulations also amends the provisions relating to offences in the Official Controls (Plant Health and Genetically Modified Organisms) (England) Regulations 2019 (S.I. 2019/1517).

Part 3 of these Regulations amends Commission Implementing Regulation (EU) 2019/2072 establishing uniform conditions for the implementation of Regulation (EU) 2016/2031 of the European Parliament and the Council, as regards protective measures against pests of plants, to include additional measures to prevent the establishment or spread of Xylella fastidiosa (Wells et al.) in Great Britain.

A full impact assessment has not been produced for this instrument as no, or no significant impact on the private or voluntary sector is foreseen.

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Explanatory Memorandum

Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources