9.—(1) In Schedule 4 (technical and administrative requirements for grant of national small series type approval), Section 1 of Part 2 (requirements for vehicles of category M1) is amended as follows.
(2) In item 2 of the table (emissions)—
(a)for the heading “2. Emissions”, substitute “ 2. Light Duty Emissions ”;
(b)in the first column—
(i)in paragraph 3, for “Vehicles”, substitute “ Complete or Completed vehicles ”.
(ii)after paragraph 3 insert—
| “4. Complete or Completed vehicles manufactured after 1st December 2018: the technical provisions of Annex XXI to Regulation (EU) No. 2017/1151 (WLTP)”; |
(c)in the third column—
(i)in paragraph 5 for “The requirements”, substitute “ In the case of a Completed vehicle, the requirements ”;
(ii)in paragraph 6, at the end, insert “ or aerodynamic performance ”.
(3) In item 3 of the table (fuel tanks / rear protective devices), in the first column, at the end of paragraph 1 insert—
“Or The technical provisions of Regulation (EC) No. 79/2009 or UNECE Regulation 134 for hydrogen.”. |
(4) Omit item 11 of the table (diesel smoke).
(5) In item 41 of the table (diesel emissions)—
(a)for the heading “41. Diesel Emissions”, substitute the heading “ 41. Heavy Duty Emissions ”;
(b)in the first column, after paragraph 2, insert—
| “3. Complete or Completed vehicles manufactured on or after 1st September 2018: Regulation (EC) No. 595/2009 Annex I limit values”; |
(c)in the third column, in paragraph 3, for “For vehicles with a maximum mass equal to or exceeding 2500kg” substitute “ In the case of Completed vehicles ”.
(6) At the end of the table add the following item—
| “69. Electrical Safety | ||
| Vehicle: The technical provisions of UNECE Regulation 100.01” |