- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made). This item of legislation is currently only available in its original format.
4.—(1) Renumber regulation 5 as paragraph (1) of that regulation.
(2) In regulation 5(1) as so renumbered—
(a)after sub-paragraph (d) omit “and”,
(b)after sub-paragraph (e) insert—
“; and
(f)if it is a heat pump for which the RHI date is on or after the third relevant date, it meets the requirements specified in paragraph (2)”.
(3) After regulation 5(1), insert—
“(2) The requirements specified in this paragraph are that—
(a)one or more eligible electricity meters or on-board meters are installed to record any—
(i)electricity supplied to the plant which is used to generate heat;
(ii)electrical input into any supplementary electric heater controlled by the same control system which governs the heat pump; and
(iii)electrical input into any immersion heater for a domestic hot water cylinder where the immersion heater is controlled by the same control system which governs the heat pump;
(b)in respect of any eligible electricity meter installed in accordance with sub-paragraph (a)—
(i)in the case of a meter installed before the third relevant date, a certified installer was responsible for installing it or for checking that it was properly installed;
(ii)in the case of a meter installed on or after the third relevant date, a certified installer was responsible for installing it;
(iii)the meter is properly calibrated, properly installed and in good working order; and
(iv)the meter has a label which identifies the plant or other components being metered.”.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:
Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:
Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:
Click 'View More' or select 'More Resources' tab for additional information including: