Search Legislation

Advanced Search

The Pressure Equipment (Safety) Regulations 2016

Changes over time for: PART 5

Help about opening options

Changes to legislation:

The Pressure Equipment (Safety) Regulations 2016, PART 5 is up to date with all changes known to be in force on or before 20 April 2024. There are changes that may be brought into force at a future date. Changes that have been made appear in the content and are referenced with annotations. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. Changes and effects are recorded by our editorial team in lists which can be found in the ‘Changes to Legislation’ area. Where those effects have yet to be applied to the text of the legislation by the editorial team they are also listed alongside the legislation in the affected provisions. Use the ‘more’ link to open the changes and effects relevant to the provision you are viewing.

View outstanding changes

Changes and effects yet to be applied to the whole Instrument associated Parts and Chapters:

Whole provisions yet to be inserted into this Instrument (including any effects on those provisions):

PART 5U.K.Market surveillance and enforcement

Designation of market surveillance authorityU.K.

66.—(1) The market surveillance authority is—

(a)in the case of pressure equipment and assemblies for use in the workplace—

(i)subject to paragraph (2), in Great Britain, the Health and Safety Executive M1; and

(ii)in Northern Ireland, the Health and Safety Executive for Northern Ireland M2;

(b)in the case of pressure equipment and assemblies for private use or consumption—

(i)in Great Britain, within its area, a weights and measures authority; and

(ii)in Northern Ireland, within its area, a district council.

(2) In so far as these Regulations apply to pressure equipment or assemblies intended exclusively or primarily for use on relevant nuclear sites, the market surveillance authority is the Office for Nuclear Regulation.

(3) In paragraph (2), “relevant nuclear site” means a site which is—

(a)a GB nuclear site (within the meaning given in section 68 of the Energy Act 2013 M3);

(b)an authorised defence site (within the meaning given in regulation 2(1) of the Health and Safety (Enforcing Authority) Regulations 1998 M4); or

(c)a new nuclear build site (within the meaning given in regulation 2A of those Regulations).

Marginal Citations

M1Established under section 10 of the Health and Safety at Work etc Act 1974.

M2Established under Article 12 of the Health and Safety at Work (Northern Ireland) Order 1978.

M4S.I. 1998/494, amended by S.I. 2014/469; there are other amending instruments but none is relevant.

EnforcementU.K.

67.—(1) Subject to paragraph (2), these Regulations and RAMS (in its application to pressure equipment or assemblies) must be enforced by the market surveillance authority.

(2) The Secretary of State, or a person appointed by the Secretary of State to act on behalf of the Secretary of State, may enforce these Regulations and RAMS (in its application to pressure equipment or assemblies).

(3) Before taking enforcement action under paragraph (2), an enforcing authority which is not the market surveillance authority must notify the market surveillance authority of the proposed action.

(4) In Scotland, only the Lord Advocate may commence proceedings for an offence under these Regulations.

Enforcement powersU.K.

68.—(1) Schedule 7 (enforcement powers of weights and measures authorities, district councils and the Secretary of State under the 1987 Act) has effect where the enforcing authority is—

(a)a weights and measures authority;

(b)a district council; or

(c)the Secretary of State.

(2) Schedule 8 (enforcement powers of the Health and Safety Executive and the Office for Nuclear Regulation under the 1974 Act) has effect where the enforcing authority is the Health and Safety Executive or the Office for Nuclear Regulation.

(3) Schedule 9 (Enforcement Powers of the Health and Safety Executive for Northern Ireland under the 1978 Order) has effect where the enforcing authority is the Health and Safety Executive for Northern Ireland.

(4) In addition to the powers available to an enforcement authority by virtue of, as appropriate, paragraph (1), (2) or (3), the authority may use the powers in Schedule 10 (compliance, withdrawal and recall notices) M5.

(5) This regulation does not prevent an enforcing authority from taking action in respect of pressure equipment or assemblies under the General Product Safety Regulations 2005 M6.

Marginal Citations

M5For the investigatory powers available to an enforcing authority for the purposes of the duty imposed by regulation 67, see Schedule 5 to the Consumer Rights Act 2015 (c.15).

Exercise of enforcement powersU.K.

69.  When enforcing these Regulations or RAMS (in its application to pressure equipment or assemblies) the enforcing authority must exercise its powers in a manner which is consistent with—

(a)regulation 70 (evaluation of pressure equipment or assemblies presenting a risk);

(b)regulation 71 (enforcement action in respect of pressure equipment or assemblies which are not in conformity and which present a risk);

(c)[F1regulation 72 (EU safeguard procedure);]

(d)regulation 73 (pressure equipment or assemblies which are in conformity, but present a risk);

(e)regulation 74 (enforcement action in cases of formal non-compliance);

(f)regulation 75 (restrictive measures).

Textual Amendments

Evaluation of pressure equipment or assemblies presenting a riskU.K.

70.—(1) Where the market surveillance authority has sufficient reason to believe that pressure equipment or an assembly presents a risk, the market surveillance authority must carry out an evaluation to determine whether that pressure equipment or assembly is in conformity with the requirements of Part 2 applying in respect of that equipment or assembly.

(2) Where an enforcing authority other than the market surveillance authority has sufficient reason to believe that pressure equipment or an assembly presents a risk, that enforcing authority may carry out an evaluation to determine whether that pressure equipment or assembly is in conformity with the requirements of Part 2 applying in respect of that equipment or assembly.

Enforcement action in respect of pressure equipment or assemblies which are not in conformity and which present a riskE+W+S

71.—(1) Where, in the course of an evaluation referred to in regulation 70, an enforcing authority finds that pressure equipment or an assembly is not in conformity with Part 2, it must, without delay, require a relevant economic operator to—

(a)take all appropriate corrective action to bring the pressure equipment or assembly into conformity with those requirements within a prescribed period;

(b)withdraw the pressure equipment or assembly within a prescribed period; or

(c)recall the pressure equipment or assembly within a prescribed period.

(2) The enforcing authority must inform the [F2approved] body which carried out the conformity assessment procedure in respect of the pressure equipment or assembly of—

(a)the respect in which the pressure equipment or assembly is not in conformity with Part 2; and

(b)the action which the enforcing authority has required the relevant economic operator to take.

F3(3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

F3(4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(5) Where the relevant economic operator does not take adequate corrective action within the prescribed period referred to in paragraph (1), the enforcing authority must take all appropriate measures to—

(a)prohibit or restrict the pressure equipment or assembly being made available on the market in the United Kingdom;

(b)withdraw the pressure equipment or assembly from the United Kingdom market; or

(c)recall the pressure equipment or assembly.

(6) Where the enforcing authority is not the Secretary of State and it takes measures under paragraph (5), it must notify the Secretary of State of those measures without delay.

F4(7) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(8) The [F5notice in paragraph (6)] must include all available details about the pressure equipment or assembly and, in particular—

(a)the data necessary for the identification of the pressure equipment or assembly;

(b)the origin of the pressure equipment or assembly;

(c)the nature of the lack of conformity alleged and the risk involved;

(d)the nature and duration of the measures taken;

(e)the arguments put forward by the relevant economic operator; and

(f)whether the lack of conformity is due to either of the following—

(i)failure of the pressure equipment or assembly to meet relevant requirements relating to a risk;

(ii)shortcomings in a [F6designated] standard referred to in regulation 40 conferring a presumption of conformity.

(9) In this regulation, “prescribed period” means a period which is—

(a)prescribed by the enforcing authority; and

(b)reasonable and commensurate with the nature of the risk presented by the pressure equipment or assembly.

Extent Information

E1This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only

Textual Amendments

Enforcement action in respect of pressure equipment or assemblies which are not in conformity and which present a riskN.I.

71.—(1) Where, in the course of an evaluation referred to in regulation 70, an enforcing authority finds that pressure equipment or an assembly is not in conformity with Part 2, it must, without delay, require a relevant economic operator to—

(a)take all appropriate corrective action to bring the pressure equipment or assembly into conformity with those requirements within a prescribed period;

(b)withdraw the pressure equipment or assembly within a prescribed period; or

(c)recall the pressure equipment or assembly within a prescribed period.

(2) The enforcing authority must inform the notified body which carried out the conformity assessment procedure in respect of the pressure equipment or assembly of—

(a)the respect in which the pressure equipment or assembly is not in conformity with Part 2; and

(b)the action which the enforcing authority has required the relevant economic operator to take.

(3) Where the enforcing authority is not the Secretary of State and it considers that the lack of conformity referred to in paragraph (1) is not restricted to [F27Northern Ireland], it must notify the Secretary of State of—

(a)the results of the evaluation; and

(b)the actions which it has required the economic operator to take.

(4) [F28Subject to paragraph 4(A),] where the Secretary of State receives a notice under paragraph (3) or otherwise considers that the lack of conformity referred to in paragraph (1) is not restricted to [F29Northern Ireland], the Secretary of State must inform the European Commission and the other [F30relevant states] of—

(a)the results of the evaluation; and

(b)the action which the enforcing authority has required the economic operator to take.

[F31(4A) Paragraph (4) does not require the Secretary of State to inform the Commission or other relevant states where the lack of conformity extends only to any of England or Wales or Scotland.]

(5) Where the relevant economic operator does not take adequate corrective action within the prescribed period referred to in paragraph (1), the enforcing authority must take all appropriate measures to—

(a)prohibit or restrict the pressure equipment or assembly being made available on the market in [F32Northern Ireland];

(b)withdraw the pressure equipment or assembly from the [F33market in Northern Ireland]; or

(c)recall the pressure equipment or assembly.

(6) Where the enforcing authority is not the Secretary of State and it takes measures under paragraph (5), it must notify the Secretary of State of those measures without delay.

(7) Where the Secretary of State receives a notice under paragraph (6), or takes measures under paragraph (5), the Secretary of State must notify the European Commission and the other [F34relevant states] of those measures without delay.

(8) The notices in paragraphs (6) and (7) must include all available details about the pressure equipment or assembly and, in particular—

(a)the data necessary for the identification of the pressure equipment or assembly;

(b)the origin of the pressure equipment or assembly;

(c)the nature of the lack of conformity alleged and the risk involved;

(d)the nature and duration of the measures taken;

(e)the arguments put forward by the relevant economic operator; and

(f)whether the lack of conformity is due to either of the following—

(i)failure of the pressure equipment or assembly to meet relevant requirements relating to a risk;

(ii)shortcomings in a harmonised standard referred to in regulation 40 conferring a presumption of conformity.

(9) In this regulation, “prescribed period” means a period which is—

(a)prescribed by the enforcing authority; and

(b)reasonable and commensurate with the nature of the risk presented by the pressure equipment or assembly.

Extent Information

E5This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only

Textual Amendments

EU safeguard procedureU.K.

72.—[F7(1) Where another [F8relevant state] has initiated the procedure under Article 40 of the Directive (as amended from time to time), each enforcing authority (other than the Secretary of State) must, without delay, inform the Secretary of State of—

(a)any measures taken by the enforcing authority in respect of the pressure equipment or assembly which is the subject of the procedure;

(b)any additional information which the enforcing authority has at its disposal relating to the lack of conformity of the pressure equipment or assembly.

(2) Where another [F9relevant state] has initiated the procedure under Article 40 of the Directive (as amended from time to time), the Secretary of State must, without delay, inform the European Commission and the other [F10relevant states] of—

(a)any measures taken [F11in Northern Ireland] by an enforcing authority in respect of the pressure equipment or assembly which is the subject of the procedure;

(b)any additional information which an enforcing authority has at its disposal relating to the lack of conformity of the pressure equipment or assembly; F12...

F12(c). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(3) Where a measure taken by another [F13relevant state] in respect of pressure equipment or an assembly is considered justified by the European Commission under Article 40(7) of the Directive (as amended from time to time), the market surveillance authority must ensure that appropriate measures, such as withdrawal, are taken [F14in Northern Ireland] in respect of the pressure equipment or assembly without delay.

(4) Where a measure taken by another [F15relevant state] in respect of pressure equipment or an assembly is considered justified by the European Commission under Article 41(1) of the Directive (as amended from time to time), the market surveillance authority must take the necessary measures to ensure that the pressure equipment or assembly is withdrawn from the [F16market in Northern Ireland].

(5) Where the market surveillance authority has taken action under paragraph (3) or (4), it must notify the Secretary of State.

(6) Where the Secretary of State receives a notice under paragraph (5), the Secretary of State must inform the European Commission of the action taken [F17in respect of Northern Ireland].

(7) If a measure taken by an enforcing authority pursuant to regulation 71 is considered unjustified by the European Commission under Article 41(1) of the Directive (as amended from time to time), the enforcing authority must withdraw that measure [F18in respect of Northern Ireland].]

Textual Amendments

Pressure equipment or assemblies which are in conformity, but present a riskE+W+S

73.—(1) Where, having carried out an evaluation under regulation 70, an enforcing authority finds that although pressure equipment is in conformity with Part 2, it presents a risk, the enforcing authority must require a relevant economic operator to take all appropriate measures to—

(a)ensure that the pressure equipment or assembly, when placed on the market, no longer presents a risk;

(b)withdraw the pressure equipment or assembly within a prescribed period;

(c)recall the pressure equipment or assembly within a prescribed period.

(2) Where an enforcing authority is not the Secretary of State and it takes measures under paragraph (1), it must notify the Secretary of State immediately.

F19(3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(4) The [F20notice referred to in paragraph (2)] must include all available details about the pressure equipment or assembly and, in particular—

(a)the data necessary for the identification of the pressure equipment or assembly;

(b)the origin and the supply chain of the pressure equipment or assembly;

(c)the nature of the risk involved; and

(d)the nature and duration of the measures taken by the enforcing authority.

(5) In this regulation, “prescribed period” means a period which is—

(a)prescribed by the enforcing authority; and

(b)reasonable and commensurate with the nature of the risk presented by the pressure equipment or assembly.

Extent Information

E2This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only

Textual Amendments

Pressure equipment or assemblies which are in conformity, but present a riskN.I.

73.—(1) Where, having carried out an evaluation under regulation 70, an enforcing authority finds that although pressure equipment is in conformity with Part 2, it presents a risk, the enforcing authority must require a relevant economic operator to take all appropriate measures to—

(a)ensure that the pressure equipment or assembly, when placed on the market, no longer presents a risk;

(b)withdraw the pressure equipment or assembly within a prescribed period;

(c)recall the pressure equipment or assembly within a prescribed period.

(2) Where an enforcing authority is not the Secretary of State and it takes measures under paragraph (1), it must notify the Secretary of State immediately.

(3) [F35Subject to paragraph (3A),] where the Secretary of State receives a notice under paragraph (2) or takes measures under paragraph (1), the Secretary of State must notify the European Commission and the other [F36relevant states] immediately.

[F37(3A) Paragraph (3) only applies to measures taken in Northern Ireland.]

(4) The notices referred to in paragraphs (2) and (3) must include all available details about the pressure equipment or assembly and, in particular—

(a)the data necessary for the identification of the pressure equipment or assembly;

(b)the origin and the supply chain of the pressure equipment or assembly;

(c)the nature of the risk involved; and

(d)the nature and duration of the measures taken by the enforcing authority.

(5) In this regulation, “prescribed period” means a period which is—

(a)prescribed by the enforcing authority; and

(b)reasonable and commensurate with the nature of the risk presented by the pressure equipment or assembly.

Extent Information

E6This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only

Textual Amendments

Enforcement action in cases of formal non-complianceE+W+S

74.—(1) Where an enforcing authority makes one of the following findings in relation to pressure equipment or an assembly, it must require a relevant economic operator to remedy the non-compliance within a specified period—

(a)the [F21UK] marking—

(i)has not been affixed; or

(ii)has been affixed otherwise than in accordance with regulations 39 (Prohibition on improper use of [F21UK] marking) and 49 ([F21UK] marking);

(b)where [F22an approved] body is involved in the production control phase for the pressure equipment or assembly, the identification number of [F23the approved] body—

(i)has not been affixed; or

(ii)has been affixed otherwise than in accordance with regulation 49;

(c)the F24... declaration of conformity—

(i)has not been drawn up;

(ii)has been drawn up otherwise than in accordance with regulations 11 (F24... declaration of conformity and [F25UK] marking) and 48 (F24... declaration of conformity);

(d)the technical documentation is either not available or not complete;

(e)the following information is absent, false or incomplete—

(i)the information specified in regulation 13 (labelling of pressure equipment and assemblies); or

(ii)the information specified in regulation 14 (instructions and safety information);

(f)any other administrative requirement imposed on the manufacturer or importer under Part 2 has not been fulfilled.

(2) Until the specified period has elapsed, the enforcing authority must not commence proceedings under these Regulations, or take any other enforcement action under these Regulations, against the relevant economic operator in respect of the non-compliance concerned.

(3) Where the non-compliance referred to in paragraph (1) persists, the enforcing authority must take appropriate measures to—

(a)restrict or prohibit the pressure equipment or assembly being made available on the market;

(b)ensure that the pressure equipment or assembly is withdrawn; or

(c)ensure that the pressure equipment or assembly is recalled.

(4) Nothing in this regulation is to prevent an enforcing authority from taking action under regulation 71 (enforcement action in respect of pressure equipment or assemblies which are not in conformity and which present a risk)F26... or 73 (pressure equipment or assemblies which are in conformity but present a risk).

Extent Information

E3This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only

Textual Amendments

Enforcement action in cases of formal non-complianceN.I.

74.—(1) Where an enforcing authority makes one of the following findings in relation to pressure equipment or an assembly, it must require a relevant economic operator to remedy the non-compliance within a specified period—

(a)the CE marking—

(i)has not been affixed; or

(ii)has been affixed otherwise than in accordance with regulations 39 (Prohibition on improper use of CE marking) and 49 (CE marking);

[F38(aa)the UK(NI) indication—

(i)has not been affixed, in contravention of regulation 49A; or

(ii)has been affixed other than in accordance with regulation 49A;]

(b)where a notified body is involved in the production control phase for the pressure equipment or assembly, the identification number of the notified body—

(i)has not been affixed; or

(ii)has been affixed otherwise than in accordance with regulation 49;

(c)the EU declaration of conformity—

(i)has not been drawn up;

(ii)has been drawn up otherwise than in accordance with regulations 11 (EU declaration of conformity and CE marking) and 48 (EU declaration of conformity);

(d)the technical documentation is either not available or not complete;

(e)the following information is absent, false or incomplete—

(i)the information specified in regulation 13 (labelling of pressure equipment and assemblies); or

(ii)the information specified in regulation 14 (instructions and safety information);

(f)any other administrative requirement imposed on the manufacturer or importer under Part 2 has not been fulfilled.

(2) Until the specified period has elapsed, the enforcing authority must not commence proceedings under these Regulations, or take any other enforcement action under these Regulations, against the relevant economic operator in respect of the non-compliance concerned.

(3) Where the non-compliance referred to in paragraph (1) persists, the enforcing authority must take appropriate measures to—

(a)restrict or prohibit the pressure equipment or assembly being made available on the market;

(b)ensure that the pressure equipment or assembly is withdrawn; or

(c)ensure that the pressure equipment or assembly is recalled.

(4) Nothing in this regulation is to prevent an enforcing authority from taking action under regulation 71 (enforcement action in respect of pressure equipment or assemblies which are not in conformity and which present a risk), 72 (EU safeguard procedure) or 73 (pressure equipment or assemblies which are in conformity but present a risk).

Extent Information

E7This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only

Textual Amendments

Restrictive measuresU.K.

75.  When enforcing these Regulations, an enforcing authority must comply with the requirements of Article 21 of RAMS (as amended from time to time) in relation to any measure to—

(a)prohibit or restrict pressure equipment or an assembly being made available on the market;

(b)withdraw pressure equipment or an assembly; or

(c)recall pressure equipment or an assembly.

OffencesU.K.

76.—(1) It is an offence for a person to contravene or fail to comply with any requirement of regulations 9 to 17, 18(4), 20 to 28, 29(4), 30 to 34, 35(3), 38 or 39.

(2) It is an offence for any person to contravene or fail to comply with any requirement of a withdrawal or recall notice served on that person by an enforcing authority under these Regulations.

PenaltiesE+W+S

77.—(1) A person guilty of an offence under regulation 76 (other than an offence arising from a contravention of or failure to comply with a requirement of regulation 12 or regulation 28) is liable—

(a)on summary conviction—

(i)in England and Wales, to a fine or imprisonment for a term not exceeding three months, or to both;

(ii)in Scotland, to a fine not exceeding the statutory maximum or imprisonment for a term not exceeding three months, or to both;

(iii)in Northern Ireland, to a fine not exceeding the statutory maximum or imprisonment for a term not exceeding three months, or to both;

(b)on conviction on indictment, to a fine or imprisonment for a term not exceeding two years or to both.

(2) A person guilty of an offence arising from a contravention of or failure to comply with a requirement of regulation 12 or regulation 28 is liable on summary conviction—

(a)in England and Wales, to a fine or imprisonment for a term not exceeding three months, or to both;

(b)in Scotland and Northern Ireland, to a fine not exceeding level 5 on the standard scale or imprisonment for a term not exceeding three months, or to both.

Extent Information

E4This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only

PenaltiesN.I.

77.—(1) A person guilty of an offence under regulation 76 (other than an offence [F39referred to in paragraphs (2) or (3)]) is liable—

(a)on summary conviction—

(i)in England and Wales, to a fine or imprisonment for a term not exceeding three months, or to both;

(ii)in Scotland, to a fine not exceeding the statutory maximum or imprisonment for a term not exceeding three months, or to both;

(iii)in Northern Ireland, to a fine not exceeding the statutory maximum or imprisonment for a term not exceeding three months, or to both;

(b)on conviction on indictment, to a fine or imprisonment for a term not exceeding two years or to both.

(2) A person guilty of an offence arising from a contravention of or failure to comply with a requirement of regulation 12 or regulation 28 is liable on summary conviction—

(a)in England and Wales, to a fine or imprisonment for a term not exceeding three months, or to both;

(b)in Scotland and Northern Ireland, to a fine not exceeding level 5 on the standard scale or imprisonment for a term not exceeding three months, or to both.

[F40(3) A person guilty of an offence under regulation 76(2) insofar as the requirement relates to a UK(NI) indication is liable on summary conviction to a fine not exceeding level 5 on the standard scale.]

Extent Information

E8This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only

Textual Amendments

Defence of due diligenceU.K.

78.—(1) In proceedings for an offence under regulation 76, it is a defence for a person (“P”) to show that P took all reasonable steps and exercised all due diligence to avoid committing the offence.

(2) P may not rely on a defence under paragraph (1) which involves a third party allegation unless P has—

(a)served a notice in accordance with paragraph (3); or

(b)obtained the leave of the court.

(3) The notice must—

(a)give any information in P's possession which identifies or assists in identifying the person who—

(i)committed the act or default; or

(ii)supplied the information on which P relied.

(b)be served on the person bringing the proceedings not less than seven clear days before—

(i)in England, Wales and Northern Ireland, the hearing of the proceedings;

(ii)in Scotland, the trial diet.

(4) P may not rely on a defence under paragraph (1) which involves an allegation that the commission of the offence was due to reliance on information supplied by another person unless it was reasonable for P to have relied upon the information, having regard in particular—

(a)to the steps that P took, and those which might reasonably have been taken, for the purpose of verifying the information; and

(b)to whether P had any reason to disbelieve the information.

(5) In this regulation, “third party allegation” means an allegation that the commission of the offence was due—

(a)to the act or default of another person; or

(b)to reliance on information supplied by another person.

Liability of persons other than principal offenderU.K.

79.—(1) Where the commission of an offence under regulation 76 (offences) is due to anything which another person did or failed to do in the course of business, that other person is guilty of the offence and may be proceeded against and punished, whether or not proceedings are taken against the first person.

(2) Where a body corporate commits an offence, a relevant person is also guilty of the offence where the offence was committed by the body corporate—

(a)with the consent or connivance of the relevant person; or

(b)as a result of the negligence of the relevant person.

(3) In paragraph (2), “relevant person” means—

(a)a director, manager, secretary or other similar officer of the body corporate;

(b)in relation to a body corporate managed by its members, a member of that body corporate performing managerial functions;

(c)in relation to a Scottish partnership, a partner; or

(d)a person purporting to act as a person described in sub-paragraphs (a), (b) or (c).

Time limit for prosecution of offencesU.K.

80.—(1) In England and Wales an information relating to an offence under regulation 76 that is triable by a magistrates' court may be so tried if it is laid within 12 months after the date on which evidence sufficient in the opinion of the prosecutor to justify the proceedings comes to the knowledge of the prosecutor.

(2) In Scotland—

(a)summary proceedings for an offence under regulation 76 may be commenced before the end of 12 months after the date on which evidence sufficient in the Lord Advocate's opinion to justify the proceedings came to the Lord Advocate's knowledge; and

(b)section 136(3) of the Criminal Procedure (Scotland) Act 1995 M7 (time limit for certain offences) applies for the purpose of this paragraph as it applies for the purpose of that section.

(3) In Northern Ireland, summary proceedings for an offence under regulation 76 may be instituted within 12 months after the date on which evidence sufficient in the opinion of the prosecutor to justify proceedings comes to the knowledge of the prosecutor.

(4) No proceedings may be brought more than three years after the commission of the offence.

(5) For the purposes of this regulation a certificate of the prosecutor (or in Scotland, the Lord Advocate) as to the date on which the evidence referred to paragraph (1), (2) or (3) came to light, is conclusive evidence.

(6) This regulation has effect subject to paragraph (1)(n) of Schedule 8 and paragraph (1)(n) of Schedule 9.

Marginal Citations

Service of documentsU.K.

81.—(1) Any document required or authorised by these Regulations to be served on a person may be served by—

(a)delivering it to that person in person;

(b)leaving it at that person's proper address; or

(c)sending it by post or electronic means to that person's proper address.

(2) In the case of a body corporate, a document may be served on a director of that body.

(3) In the case of a partnership, a document may be served on a partner or a person having control or management of the partnership business.

(4) For the purposes of this regulation, “proper address” means—

(a)in the case of a body corporate or its director—

(i)the registered or principal office of that body; or

(ii)the email address of the secretary or clerk of that body;

(b)in the case of a partnership, a partner or person having control or management of the partnership business—

(i)the principal office of the partnership; or

(ii)the email address of a partner or person having that control or management;

(c)in any other case, a person's last known address, which may be an email address.

(5) If a person to be served with a document has specified an address in the United Kingdom (other than that person's proper address) at which that person or someone on that person's behalf will accept service, that address must also be treated as that person's proper address.

(6) In this regulation, “partnership” includes a Scottish partnership.

Recovery of expenses of enforcementU.K.

82.—(1) This regulation applies where a person commits an offence under regulation 76.

(2) The court may (in addition to any other order it may make as to costs or expenses) order the person to reimburse the enforcing authority for any expenditure which the enforcing authority has incurred in investigating the offence.

Action by enforcing authorityU.K.

83.—(1) An enforcing authority may itself take action which an economic operator could have been required to take by a notice served under regulation 68 (enforcement powers) where the conditions for serving such a notice are met and either—

(a)the enforcing authority has been unable to identify any economic operator on whom to serve such a notice; or

(b)the economic operator on whom such a notice has been served has failed to comply with it.

(2) If the enforcing authority has taken action under paragraph (1) following the failure of an economic operator to comply with a notice, the authority may recover from that person as a civil debt any costs or expenses reasonably incurred by the enforcing authority in taking the action.

(3) A civil debt recoverable under paragraph (2) may be recovered summarily—

(a)in England and Wales by way of a complaint pursuant to section 58 of the Magistrates' Courts Act 1980 M8;

(b)in Northern Ireland in proceedings under article 62 of the Magistrates' Courts (Northern Ireland) Order 1981 M9.

Marginal Citations

M81980 c.43; section 58 was amended by the Crime and Courts Act 2013 (c.22), Schedule 10 paragraph 40.

Appeals against noticesU.K.

84.—(1) An application for an order to vary or set aside the terms of a notice served under regulation 68 may be made—

(a)by the economic operator on whom the notice has been served; and

(b)in the case of a notice other than a recall notice, by a person having an interest in the pressure equipment or assembly in respect of which the notice has been served.

(2) An application must be made before the end of the period of 21 days beginning with the day on which the notice was served.

(3) The appropriate court may only make an order setting aside a notice served under regulation 68 (enforcement powers) if satisfied—

(a)that the pressure equipment or assembly to which the notice relates is in conformity with Part 2; or

(b)that the enforcing authority failed to comply with regulation 69 (exercise of enforcement powers) when serving the notice.

(4) On an application to vary the terms of a notice served under regulation 68, the appropriate court may vary the terms of the notice as it considers appropriate.

(5) In this regulation—

(a)the “appropriate court” is to be determined in accordance with regulation 85 (appropriate court for appeals against notices); and

(b)“notice” means any of the following—

(i)a prohibition notice served in accordance with Schedule 7;

(ii)a notice to warn served in accordance with Schedule 7;

(iii)a suspension notice served in accordance with Schedule 7;

(iv)a compliance notice served in accordance with Schedule 10;

(v)a withdrawal notice served in accordance with Schedule 10; or

(vi)a recall notice served in accordance with Schedule 10.

Appropriate court for appeals against noticesU.K.

85.—(1) In England and Wales or Northern Ireland, the appropriate court for the purposes of regulation 84 is—

(a)the court in which proceedings have been brought in relation to the pressure equipment or assembly for an offence under regulation 76 (offences);

(b)an employment tribunal seized of appeal proceedings against a notice which relates to pressure equipment and which has been served under or by virtue of paragraph 1 of Schedule 8 (enforcement powers of the Health and Safety Executive under the 1974 Act); or

(c)an industrial tribunal seized of appeal proceedings against a notice which relates to pressure equipment and which has been served under or by virtue of paragraph 1 of Schedule 9 (enforcement powers of the Health and Safety Executive for Northern Ireland under the 1978 Order); or

(d)in any other case, a magistrates' court.

(2) In Scotland, the appropriate court for the purposes of regulation 84 is—

(a)the sheriff court within whose sheriffdom the appellant resides or, as the case may be, has a registered or principal office; or

(b)an employment tribunal seized of appeal proceedings against a notice which relates to pressure equipment and which has been served under or by virtue of paragraph 1 of Schedule 8.

(3) A person aggrieved by an order made by a magistrates' court in England and Wales or Northern Ireland pursuant to an application under regulation 84, or by a decision of such a court not to make such an order, may appeal against that order or decision—

(a)in England and Wales, to the Crown Court;

(b)in Northern Ireland, to the county court.

CompensationU.K.

86.—(1) When an enforcing authority other than the Health and Safety Executive, the Health and Safety Executive for Northern Ireland or the Office for Nuclear Regulation serves a relevant notice in respect of pressure equipment or an assembly, that authority is liable to pay compensation to a person having an interest in the equipment or assembly for any loss or damage suffered by reason of the notice if both of the conditions in paragraph (2) are met.

(2) The conditions are that—

(a)the pressure equipment or assembly in respect of which the relevant notice was served neither—

(i)presents a risk; nor

(ii)contravenes any requirement of these Regulations; and

(b)the relevant notice was not served because of neglect or default by a relevant economic operator.

(3) In this regulation, “relevant notice” means a suspension, withdrawal or recall notice as referred to in regulation 84(5)(b).

Back to top

Options/Help

Print Options

You have chosen to open The Whole Instrument

The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

You have chosen to open The Whole Instrument as a PDF

The Whole Instrument you have selected contains over 200 provisions and might take some time to download.

Would you like to continue?

You have chosen to open the Whole Instrument

The Whole Instrument you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

You have chosen to open Schedules only

The Schedules you have selected contains over 200 provisions and might take some time to download. You may also experience some issues with your browser, such as an alert box that a script is taking a long time to run.

Would you like to continue?

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Explanatory Memorandum

Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Impact Assessments

Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:

  • Why the government is proposing to intervene;
  • The main options the government is considering, and which one is preferred;
  • How and to what extent new policies may impact on them; and,
  • The estimated costs and benefits of proposed measures.
Close

Timeline of Changes

This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources