PART 6 U.K.Miscellaneous

Transitional provisionsE+W+S

82.—(1) For the purposes of these Regulations, a certificate or approval decision issued by a notified body under the 1997 Regulations, or any enactment of another member State which implemented the 1995 Directive, is to be treated as a certificate or approval decision issued under the Directive.

(2) In this regulation, “1995 Directive” means Directive 95/16/EC of the European Parliament and of the Council on the approximation of the laws of the member States relating to lifts M1.

[F1(3) [F2In paragraphs (4) to (8)]

pre-exit period” means the period beginning with the commencement date and ending immediately before IP completion day;

product” means a lift or a safety component to lifts to which these Regulations apply.

(4) Subject to paragraph (5), where a product was made available on the market during the pre-exit period, despite the amendments made by Schedule 22 to the Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019, any obligation to which a person was subject under these Regulations as they had effect immediately before IP completion day, continues to have effect as it did immediately before IP completion day, in relation to that product.

(5) Paragraph (4) does not apply to—

(a)any obligation of any enforcing authority to inform the European Commission or the member States of any matter; or

(b)any obligation to take action outside of the United Kingdom in respect of that product.

(6) Where during the pre-exit period—

(a)a product has not been placed on the market; and

(b)a manufacturer has taken any action under regulations 47 or 48 as they had effect immediately before IP completion day in relation to that product,

that action has effect as if it had been done under regulations 47 or 48 as they have effect on and after IP completion day.]

[F3(7) Subject to paragraph (8), where before 11pm on 31st December 2024—

(a)a product has not been placed on the market; and

(b)an installer or a manufacturer has taken any action under the conformity assessment procedure that applies to that product in accordance with Article 15 or 16 of the Directive

that action has effect as if it had been done under the applicable conformity assessment procedure referred to in regulation 47 or 48.

(8) Paragraph (7) does not apply—

(a)after the expiry of the validity of any certificate issued pursuant to the applicable conformity assessment procedure; and

(b)in any event, after 31st December 2027.]

Extent Information

E1This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only

Textual Amendments

Marginal Citations

M1OJ L 213, 7.9.1995, p.1; as last amended by Regulation (EU) No 1025/2012 of the European Parliament and of the council of 25 October 2012 (OJ L 316, 14.11.2012, p.12).

Transitional provisionsN.I.

82.—(1) For the purposes of these Regulations, a certificate or approval decision issued by a notified body under the 1997 Regulations, or any enactment of another member State which implemented the 1995 Directive, is to be treated as a certificate or approval decision issued under the Directive.

(2) In this regulation, “1995 Directive” means Directive 95/16/EC of the European Parliament and of the Council on the approximation of the laws of the member States relating to lifts.

Extent Information

E2This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only