xmlns:atom="http://www.w3.org/2005/Atom" xmlns:atom="http://www.w3.org/2005/Atom"
48. For the assessment of conformity of a safety component for lifts, the manufacturer must carry out one of the following procedures—
(a)the model of the safety component for lifts must be submitted for [F1Type] examination set out in Part A of [F2Schedule 11] and the conformity to type must be ensured with random checking of the safety component for lifts set out in [F3Schedule 16];
(b)the model of the safety component for lifts must be submitted for [F1Type] examination set out in Part A of [F4Schedule 11] and be subject to conformity to type based on product quality assurance in accordance with [F5 Schedule 13];
(c)conformity based on full quality assurance set out in [F6Schedule 14].
Extent Information
E1This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F1Word in reg. 48 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 22 para. 28(a) (with Sch. 22 para. 37) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F2Words in reg. 48(a) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 22 para. 28(b)(i) (with Sch. 22 para. 37) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F3Words in reg. 48(a) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 22 para. 28(b)(ii) (with Sch. 22 para. 37) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F4Words in reg. 48(b) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 22 para. 28(c)(i) (with Sch. 22 para. 37) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F5Words in reg. 48(b) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 22 para. 28(c)(ii) (with Sch. 22 para. 37) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F6Words in reg. 48(c) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 22 para. 28(d) (with Sch. 22 para. 37) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
48. For the assessment of conformity of a safety component for lifts, the manufacturer must carry out one of the following procedures—
(a)the model of the safety component for lifts must be submitted for EU type examination set out in Part A of Annex IV to the Directive (as amended from time to time) and the conformity to type must be ensured with random checking of the safety component for lifts set out in Annex IX to the Directive (as amended from time to time);
(b)the model of the safety component for lifts must be submitted for EU type examination set out in Part A of Annex IV to the Directive (as amended from time to time) and be subject to conformity to type based on product quality assurance in accordance with Annex VI to the Directive (as amended from time to time);
(c)conformity based on full quality assurance set out in Annex VII to the Directive (as amended from time to time).
Extent Information
E2This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only