10.—(1) Before placing a lift on the market, an installer must—
(a)ensure that it is labelled with—
(i)the name, registered trade name or registered trade mark of the installer;
(ii)a single postal address at which the installer can be contacted; and
(iii)the type, batch or serial number of the lift or other element allowing the lift to be identified; and
(b)ensure that it is accompanied by the instructions referred to in [F1paragraph 7(2) of Schedule 1].
[F2(2) the information referred to in paragraph (1) must be clear, legible and in easily understandable English.]
F3(3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Extent Information
E1This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only
Textual Amendments
F1Words in reg. 10(1)(b) substituted (21.4.2018) by The Gas Appliances (Enforcement) and Miscellaneous Amendments Regulations 2018 (S.I. 2018/389), reg. 1(1), Sch. 6 para. 3 (with reg. 2)
F2Reg. 10(2) substituted (E.W.S) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 22 para. 8(a) (with Sch. 22 para. 37) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
F3Reg. 10(3) omitted (E.W.S.) (31.12.2020) by virtue of The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 22 para. 8(b) (with Sch. 22 para. 37) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)
10.—(1) Before placing a lift on the market, an installer must—
(a)ensure that it is labelled with—
(i)the name, registered trade name or registered trade mark of the installer;
(ii)a single postal address at which the installer can be contacted; and
(iii)the type, batch or serial number of the lift or other element allowing the lift to be identified; and
(b)ensure that it is accompanied by the instructions referred to in [F4paragraph 7(2) of Schedule 1].
(2) The information referred to in paragraph (1) above must be—
(a)in the case of the information referred to in paragraph (1)(a), in a language that can be easily understood by the end-users and the competent national authority in the [F5relevant state] in which the lift is to be placed on the market;
(b)in the case of the information referred to in paragraph 1(b), in a language which can be easily understood by the end-users in the [F5relevant state] in which the lift is to be placed on the market; and
(c)clear and understandable.
(3) Where the lift is to be placed on the market in [F6Northern Ireland] the language which can be easily understood by end-users is English.
Extent Information
E2This version of this provision extends to Northern Ireland only; a separate version has been created for England and Wales and Scotland only
Textual Amendments
F4Words in reg. 10(1)(b) substituted (21.4.2018) by The Gas Appliances (Enforcement) and Miscellaneous Amendments Regulations 2018 (S.I. 2018/389), reg. 1(1), Sch. 6 para. 3 (with reg. 2)
F5Words in reg. 10 substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 10 para. 3(3)(a)
F6Words in reg. 10 substituted (N.I.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment) (Northern Ireland) (EU Exit) Regulations 2020 (S.I. 2020/1112), reg. 1(b), Sch. 10 para. 3(3)(b)