Textual Amendments
F1Schs. 2-5 inserted (31.12.2020) by The Merchant Shipping (Marine Equipment) (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/470), reg. 1(1), Sch. para. 27(2) (with regs. 5, 6) (as amended by S.I. 2020/1000, regs. 1, 7(2)); 2020 c. 1, Sch. 5 para. 1(1)
1. United Kingdom type-examination is the part of a conformity assessment procedure in which an approved body examines the technical design of marine equipment and verifies and attests that the technical design of the marine equipment meets the applicable requirements of these Regulations.
2. United Kingdom type-examination may be carried out in either of the following ways—U.K.
(a)examination of a specimen, representative of the production envisaged, of the complete product (production type);
(b)assessment of the adequacy of the technical design of the marine equipment through examination of the technical documentation and supporting evidence referred to in paragraph 3, plus examination of specimens, representative of the production envisaged, of one or more critical parts of the product (combination of production type and design type).
3.—(1) The manufacturer must lodge an application for United Kingdom-type examination with a single approved body of its choice.U.K.
(2) The application must include—
(a)the name and address of the manufacturer and, if the application is lodged by the authorised representative, its name and address as well;
(b)a written declaration that the same application has not been lodged with any other approved body;
(c)the technical documentation;
(e)the specimens representative of the production envisaged. The approved body may request further specimens if needed for carrying out the test programme;
(f)the supporting evidence for the adequacy of the technical solution; this supporting evidence must—
(i)mention any documents that have been used;
(ii)include, where necessary, the results of tests carried out by the appropriate laboratory of the manufacturer, or by another testing laboratory on the manufacturer's behalf and under the manufacturer's responsibility.
4. The technical documentation referred to in paragraph 3(2)(c) must—U.K.
(a)make it possible to assess the conformity of the marine equipment with the applicable international standards and must include an adequate analysis and assessment of the risks;
(b)specify the applicable requirements and cover, as far as relevant for the assessment, the design, manufacture and operation of the marine equipment;
(c)contain, wherever applicable, at least the following elements—
(i)a general description of the marine equipment;
(ii)conceptual design and manufacturing drawings and schemes of components , sub-assemblies and circuits;
(iii)descriptions and explanations necessary for the understanding of those drawings and schemes and of the operation of the marine equipment;
(iv)a list of the requirements and testing standards which are applicable to the marine equipment concerned in accordance with these Regulations, together with a description of the solutions adopted to meet those requirements;
(v)results of design calculations made and examinations carried out;
(vi)test reports.
5.—(1) The approved body must examine the technical documentation and supporting evidence to assess the adequacy of the technical design of the marine equipment.U.K.
(2) When examining a specimen, the approved body must—
(a)verify that the specimen has been manufactured in conformity with the technical documentation;
(b)identify the elements which have been designed in accordance with the relevant applicable requirements of these Regulations and testing standards, as well as the elements which have been designed without applying the relevant provisions of those standards;
(c)carry out appropriate examinations and tests, or have them carried out in accordance with these Regulations;
(d)agree with the manufacturer on a location where the examinations and tests will be carried out.
6. The approved body must draw up an evaluation report that records the activities taken in accordance with paragraph 5 and their outcomes and, without prejudice to its obligations in relation to the Secretary of State, the approved body may disclose the content of that report, in full or in part, only with the agreement of the manufacturer.U.K.
7.—(1) Where the type meets the requirements of the applicable international standards that apply to the marine equipment concerned, the approved body must issue a United Kingdom type-examination certificate to the manufacturer, which must contain—U.K.
(a)the name and address of the manufacturer;
(b)the conclusions of the examination;
(c)the conditions (if any) for its validity;
(d)all relevant information to allow the conformity of manufactured products with the examined type to be evaluated and to allow for in-service control; and
(e)the necessary data for identification of the approved type.
(2) The United Kingdom-type examination certificate referred to in sub-paragraph (1) may have one or more annexes attached.
(3) Where the type does not satisfy the applicable requirements of the applicable international standards, the approved body must refuse to issue a United Kingdom-type certificate and must inform the applicant accordingly, giving detailed reasons for its refusal.
8.—(1) Where the approved type no longer complies with the applicable requirements, the approved body must determine whether further testing or a new conformity assessment procedure is necessary.U.K.
(2) A manufacturer must inform the approved body that holds the technical documentation relating to the United Kingdom-type examination certificate of all modifications to the approved type that may affect the conformity of the marine equipment with the requirements of the applicable international standards or the conditions for validity of the certificate; such modifications require additional approval in the form of an addition to the original United Kingdom-type examination certificate.
9.—(1) Each approved body must inform the Secretary of State about all the United Kingdom type-examination certificates and any additions to those certificates which it has issued or withdrawn, and must, periodically or on request, make available to the Secretary of State the list of such certificates and any additions to those certificates which it has refused, suspended or otherwise restricted.U.K.
(2) Each approved body must inform the other approved bodies about all the United Kingdom-type examination certificates and any additions to those certificates which it has refused, withdrawn, suspended or otherwise restricted.
(3) An approved body must, on request, provide the other approved bodies with a copy of the United Kingdom type-examination certificates and any additions to those certificates which it has issued.
(4) An approved body must keep a copy of United Kingdom-type-examination certificate, its annexes and additions, as well as the technical file including the documentation submitted by the manufacturer, until the expiry of the validity of that certificate.
(5) The Secretary of State may, on request, obtain—
(a)a copy of a United Kingdom-type examination certificate from an approved body that it has issued, refused, suspended or restricted;
(b)a copy of the technical documentation and the results of the examinations carried out by approved bodies.
10. A manufacturer must keep a copy of the United Kingdom type-examination certificate, its annexes and additions together with the technical documentation at the disposal of the Secretary of State for a period of at least 10 years after the United Kingdom conformity mark has been affixed on the last product manufactured and, in no case for a period shorter than the expected life of the marine equipment concerned.U.K.
11. The manufacturer's authorised representative may lodge the application referred to in paragraph 3 and fulfil the obligations set out in paragraphs 8(2) and 10, provided that they are specified in the mandate.]U.K.