Search Legislation

The Motor Vehicles (Driving Licences) (Amendment) Regulations 2014

 Help about what version

What Version

  • Latest available (Revised)
  • Original (As made)

Status:

This is the original version (as it was originally made). This item of legislation is currently only available in its original format.

Amendment of the Motor Vehicles (Driving Licences) Regulations 1999

This section has no associated Explanatory Memorandum

5.  In regulation 37 (test vehicles)—

(a)in paragraphs (1) and (2) for “paragraph 3” substitute “paragraphs (3) and (3A)”;

(b)for paragraph (3) substitute—

(3) Subject to paragraph (3A), where the test referred to in paragraph (1) is for a licence authorising the driving of vehicles in sub-category A1, A2 or A3 shown in column (1) of Table 1, the test must be conducted in a vehicle conforming to the description set out in relation to that sub-category in column (2) of Table 1.;

(c)after paragraph (3) insert—

(3A) Where in an application for a manoeuvres test or a practical test prescribed in respect of category A it is declared that the applicant is suffering from a relevant disability of such a nature that the applicant is unable to ride a motorcycle without side-car, the test must be conducted––

(a)in the case of the test for a licence authorising the driving of a vehicle in sub-category A1, on an A1 motor tricycle or an A1 motorcycle with sidecar where the capacity and unassisted speed on the level of the motor tricycle or the motorcycle, (as the case may be), conforms to the specification in the description set out in relation to sub-category A1 in column (2) of Table 1;

(b)in the case of the test for a licence authorising the driving of a vehicle in sub-category A2, on an A2 motorcycle with sidecar where the capacity and power output of the motorcycle conforms to the specification in the description set out in relation to sub-category A2 in column (2) of Table 1; and

(c)in the case of the test for a licence authorising the driving of a vehicle in sub-category A3, on an A3 motor tricycle or an A3 motorcycle with sidecar where the capacity and unassisted speed on the level of the motor tricycle or the motorcycle, (as the case may be) conforms to the specification in the description set out in relation to sub-category A3 in column (2) of Table 1 which-

(i)applies until 30th December 2018 where the test is conducted on or before that date; and

(ii)applies on and from 31st December 2018 where the test is conducted on or after that date;

(d)in paragraph (10B), for the words “has at least eight forward ratios”, substitute “is capable of manual transmission”; and

(e)in Table 1 for the entries in column (2) (specification or description) corresponding to the sub-categories A1, A2 and A3 in column (1) substitute—

(i)for sub-category A1—

An A1 motorcycle without side-car, with a power rating not exceeding 11kW and a power to weight ratio not exceeding 0.1 kW/kg that is capable of an unassisted speed of at least 90 kilometres per hour on the level. If powered by an internal combustion engine, the cylinder capacity shall be at least 115 cubic centimetres. If powered by an electric motor, the power to weight ratio of the vehicle shall be at least 0.08 kW/kg.;

(ii)for sub-category A2—

An A2 motorcycle without side-car, with a power rating of at least 20kW but not exceeding 35kW and a power to weight ratio not exceeding 0.2 kW/kg. If powered by an internal combustion engine, the cylinder capacity of the engine shall be at least 395 cubic centimetres. If powered by an electric motor, the power to weight ratio of the vehicle shall be at least 0.15 kW/kg.; and

(iii)for sub-category A3—

Until 30th December 2018, an A3 motorcycle without side-car and a power of at least 40kW. If powered by an internal combustion engine, the cylinder capacity of the engine shall be at least 595 cubic centimetres. If powered by an electric motor, the power to weight ratio of the vehicle shall be at least 0.25 kW/kg.

From 31st December 2018, an A3 motorcycle without side-car with a power of at least 50kW whose unladen mass is more than 175kg. If powered by an internal combustion engine, the cylinder capacity of the engine shall be at least 595 cubic centimetres. If powered by an electric motor, the power to weight ratio of the vehicle shall be at least 0.25 kW/kg..

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Explanatory Memorandum

Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Impact Assessments

Impact Assessments generally accompany all UK Government interventions of a regulatory nature that affect the private sector, civil society organisations and public services. They apply regardless of whether the regulation originates from a domestic or international source and can accompany primary (Acts etc) and secondary legislation (SIs). An Impact Assessment allows those with an interest in the policy area to understand:

  • Why the government is proposing to intervene;
  • The main options the government is considering, and which one is preferred;
  • How and to what extent new policies may impact on them; and,
  • The estimated costs and benefits of proposed measures.
Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources