Deposit of waste from dredging of inland waters (D1)
1.—(1) The deposit of relevant waste arising from the dredging of inland waters and associated screening and dewatering.
(2) The table specifying relevant waste for the purposes of this paragraph is set out below.
| Codes | Waste types |
|---|---|
| 170506 | Dredging spoil other than those mentioned in 170505 |
(3) For the purposes of this paragraph, the specific conditions are that—
(a)the total quantity of waste deposited or treated over any 12-month period does not exceed 50 cubic metres for each metre of land on which the waste is deposited; and
(b)the waste is deposited at the closest possible point to where the waste was produced on—
(i)the bank of the inland waters from which the waste was produced, or
(ii)such width of land adjoining the inland waters so as to enable the waste to be removed and deposited by mechanical means in one operation.