Search Legislation

The Road Tunnel Safety Regulations 2007

Status:

This is the original version (as it was originally made).

Regulation 2, Annex I (2.12)

SCHEDULESigning for tunnels

(a)

S.I. 2002/3113, (to which there are amendments not relevant to these Regulations).

1.

General requirements

The following are road signs and symbols to be used for road tunnels.

In order to facilitate international understanding of signs, the system of signs and signals prescribed in this Schedule is based on the use of shapes and colours characteristic of each class of sign and, wherever possible, on the use of graphic symbols rather than words.

1.1

Road signs shall be used to designate the following safety facilities in tunnels (where they have been provided):

  • lay-bys,

  • emergency exits: the same sign shall be used for all kinds of emergency exits,

  • escape routes: the two nearest emergency exits shall be signed on the sidewalls at distances of no more than 25 metres, at a height of 1.0 to 1.5 metres above escape route level, with an indication of the distances to the exits,

  • emergency stations: signs to indicate the presence of emergency phones and fire extinguishers.

1.2

Radio:

In road tunnels where users can receive information via their radio, appropriate signs placed before the entrance shall inform users on how to receive this information.

1.3Signs and markings shall be designed and positioned so that they are clearly visible.
2.

Description of signs and panels

Appropriate signs shall be used, if necessary, in the advance warning area of the road tunnel, inside the tunnel and after the end of the tunnel. When designing the signs for a road tunnel, local traffic and construction conditions as well as other local conditions shall be considered.

2.1

Road Tunnel Sign

The traffic sign shown in diagram 529.1 in Schedule 1 to the TSRGD shall be used in combination with the traffic sign shown in diagram 570 in Schedule 1 to the TSRGD (with the distance varied as appropriate) at the entrance to the road tunnel.

For road tunnels over 3,000 metres in length, the remaining length of the tunnel shall be indicated approximately every 1,000 m.

The name of the tunnel may be indicated in the manner shown below.

2.2

Horizontal signing

Horizontal delineation should be used at the roadside edge.

In the case of bi-directional road tunnels, clearly visible means should be used along the median line (single or twin) separating the two directions.

2.3Signs and panels for signing of facilities:
2.3.1

Emergency stations

Emergency stations shall bear informative signs which indicate the equipment available to road users, such as:

(a)For an emergency telephone: the traffic signs to be used shall be those shown in diagrams 2714 and 2715 in Schedule 7 to the TSRGD;
(b)The symbol to be used for a fire extinguisher shall be that shown in diagram F001 in International Standard ISO 7010:2003 relating to safety colours and safety signs - safety sings used in workplaces and public areas; and
(c)

In emergency stations which are separated from the road tunnel by a door, a clearly legible text, written in appropriate languages, shall indicate that the emergency station does not ensure protection in case of fire. An example is given below:

‘THIS AREA DOES NOT PROVIDE PROTECTION FROM FIRE

Follow signs to emergency exits’

2.3.2

Lay-bys

The signs to indicate lay-bys shall be the traffic sign shown in diagram 2713.1 in Schedule 7 to the TSRGD with the ‘P’ symbol omitted. Telephones and fire extinguishers shall be indicated by an additional panel or incorporated in the sign itself.

2.3.3

Emergency exits

The signs to be used to indicate ‘Emergency exits’ shall be the sign shown in diagram 2711 of Schedule 7 to the TSRGD; and

The sign shown in diagram 2711 in of Schedule 7 to the TSRGD shall also be used to sign the two nearest exits on the sidewalls, with the distance to those exits shown below the arrow where appropriate. This sign shall be internally illuminated.

2.3.4

Lane signals

The signs shown in diagrams 5003, 5003.1, 5003.2, 5005 and 5005.1 in Schedule 10 to the TSRGD shall be used for lane signals.

2.3.5

Variable message signing

Any variable message signs shall have clear indications to inform tunnel users of congestion, breakdown, accident, fire or any other hazards.

3.In this Schedule “the TSRGD” means the Traffic Signs Regulations and General Directions(a).
3.1For the purposes of the application of these Regulations to Northern Ireland-
(a)references in paragraphs 2.1 and 2.3.4 to the traffic signs shown in diagrams 529.1, 570, 5001.1, 5001.2, 5003, 5003.1, 5005 and 5005.1 of the TSRGD are references to signs shown in diagrams of corresponding numbers in the Traffic Signs Regulations (Northern Ireland) 1997 (“the 1997 Regulations”)(b);
(b)the traffic signs shown in diagrams 2711, 2713.1, 2714 and 2715 of the TSRGD shall be deemed to be incorporated with those numbers in Schedule 7 to the 1997 Regulations together with the untitled Table below each diagram, and references in these regulations to those diagrams in the TSRGD shall be deemed to be references to those diagrams as so incorporated; and
(c)in relation to the Tables below each diagram referred to in sub-paragraph (b)-
(d)items 1, 2 and 3 shall be omitted;
(e)items 4 and 5 shall be renumbered 3 and 4;
(f)in item 3 as so renumbered (permitted variants) the items in Schedule 16 to TSRGD shall be deemed to be incorporated with those numbers in Schedule 16 to the 1997 Regulations; and
(g)in item 4 as so renumbered (illumination requirements) the items in Schedule 17 to TSRGD shall be deemed to incorporated with those numbers in Schedule 17 to the 1997 Regulations.

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Explanatory Memorandum

Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources