Search Legislation

The Weights and Measures (Packaged Goods) Regulations 2006

 Help about what version

What Version

 Help about advanced features

Advanced Features

Changes over time for: SCHEDULE 2

 Help about opening options

Alternative versions:

Changes to legislation:

There are currently no known outstanding effects for the The Weights and Measures (Packaged Goods) Regulations 2006, SCHEDULE 2. Help about Changes to Legislation

Close

Changes to Legislation

Revised legislation carried on this site may not be fully up to date. At the current time any known changes or effects made by subsequent legislation have been applied to the text of the legislation you are viewing by the editorial team. Please see ‘Frequently Asked Questions’ for details regarding the timescales for which new effects are identified and recorded on this site.

Regulation 2

SCHEDULE 2The reference test

This schedule has no associated Explanatory Memorandum

This Schedule lays down the procedures of the reference test for statistical checking of batches of packages in order to meet the requirements of regulation 4(1)(a) and (b).

1.  REQUIREMENTS FOR MEASURING THE ACTUAL CONTENTS OF PACKAGES

1.1 The actual contents of packages may be measured directly by means of weighing instruments or volumetric instruments or, in the case of liquids, indirectly, by weighing the packed product and measuring its density.

1.2 In all operations for checking quantities of products expressed in units of volume, the value employed for the actual contents shall be measured at or corrected to a temperature of 20°C, whatever the temperature at which packaging or checking is carried out. However this rule shall not apply to deep frozen or frozen products the quantity of which is expressed in units of volume.

1.3 Irrespective of the method used, the error made in measuring the actual contents of a package shall not exceed one-fifth of the tolerable negative error for the nominal quantity in the package.

2.  REQUIREMENTS FOR CHECKING BATCHES OF PACKAGES

2.1 The checking of packages shall be carried out by sampling and shall be in two parts:

2.1.1a check covering the actual contents of each package in the sample,

2.1.2another check on the average of the actual contents of the packages in the sample.

2.2 A batch of packages shall be considered acceptable if the results of both these checks satisfy the acceptance criteria.

2.3 For each of these checks, there are three sampling plans:

2.3.1a single sampling plan for non-destructive testing, i.e. testing which does not involve opening the package,

2.3.2a double sampling one for non-destructive testing, and

2.3.3a single sampling plan for destructive testing, i.e., testing which involves opening or destroying the package.

2.4 For economic and practical reasons, the third test shall be limited to the absolutely essential minimum; it is less effective than the non-destructive tests. Destructive testing shall therefore be used only when non-destructive testing is impracticable. As a general rule it shall not be applied to batches of fewer than 100 units.

Package batches

2.5 The batch shall comprise all the packages of the same nominal quantity, the same type and the same production run, packed in the same place, which are to be inspected. The batch size shall be limited to the amounts laid down below.

2.6 When packages are checked at the end of the packing line, the number in each batch shall be equal to the maximum hourly output of the packing line, without any restriction as to batch size.

2.7 In other cases the batch size shall be limited to 10,000.

2.8 For batches of fewer than 100 packages, the non-destructive test, where carried out, shall be 100%.

2.9 Before the tests in paragraphs 3 and 4 are carried out, a sufficient number of packages shall be drawn at random from the batch so that the check requiring the larger sample can be carried out. For the other check, the necessary sample shall be drawn at random from the first sample and marked.

2.10 This marking operation shall be completed before the start of measuring operations.

3.  CHECKING OF THE ACTUAL CONTENTS OF A PACKAGE

3.1 The minimum acceptable contents shall be calculated by subtracting the tolerable negative error for the contents concerned from the nominal quantity of the package.

3.2 Packages in the batch whose actual contents are less than the minimum acceptable contents shall be considered defective.

Single sampling plan for non-destructive testing

3.3 The number of packages checked shall be equal to the number in the sample, as indicated in the table below.

3.4 If the number of defective packages found in the sample is less than or equal to the acceptance criterion indicated in that table, the group shall be considered as acceptable for the purpose of the check.

3.5 If the number of defective packages found in the sample is equal to or greater than the rejection criterion there indicated, the group shall be rejected.

  Number of defective packages
Number in groupNumber in sampleAcceptance criterionRejection criterion
100 to 5005034
501 to 3,2008056
3,201 and above12578

3.6 For a batch of fewer than 100 packages the batch shall be considered acceptable for the purposes of the check if the number of defective packages does not exceed 5%.

Double sampling plan for non-destructive testing

3.7 Non-destructive testing shall be carried out in accordance with a double sampling plan as shown in the table below.

3.8 The first number of packages checked shall be equal to the number of units in the first sample, as indicated in the plan.

3.9 If the number of defective units found in the first sample is less than or equal to the first acceptance criterion, the batch shall be considered acceptable for the purpose of this check.

3.10 If the number of defective units found in the first sample is equal to or greater than the first rejection criterion, the batch shall be rejected.

3.11 If the number of defective units found in the first sample lies between the first acceptance criterion and the first rejection criterion, a second sample shall be checked, the number of units in which is indicated in the plan. The defective units found in the first and second samples shall be added together and:

3.1.1if the aggregate number of defective units is less than or equal to the second acceptance criterion, the batch shall be considered acceptable for the purpose of this check,

3.1.2if the aggregate number of defective units is greater than or equal to the second rejection criterion, the batch shall be rejected.

 SamplesNumber of defective units
Number in batchOrderNumberAggregate numberAcceptance criterionRejection criterion
100 to 50

1st

2nd

30

30

30

60

1

4

3

5

501 to 3,200

1st

2nd

50

50

50

100

2

6

5

7

3,201 and over

1st

2nd

80

80

80

160

3

8

7

9

Single sampling plan for destructive testing

3.12 Destructive testing shall be carried out in accordance with the single sampling plan below and shall be used only for batches of 100 or more.

3.13 The number of packages checked shall be equal to 20.

3.14 If the number of defective units found in the sample is less than or equal to the acceptance criterion, the batch of packages shall be considered as acceptable.

3.15 If the number of defective units found in the sample is equal to or greater than the rejection criterion, the batch of packages shall be rejected.

  Number of defective packages
Number in batchNumber in sampleAcceptance criterionRejection criterion
Whatever the number (≥ 100)2012

4.  CHECKING OF AVERAGE ACTUAL VOLUME OF THE CONTENTS OF THE INDIVIDUAL PACKAGES MAKING UP A BATCH

4.1 A batch of packages shall be considered acceptable for the purpose of this check if the mean value

of the actual quantity of the contents of the packages in the sample is greater than the value:

4.2 In this formula:

Qn = the nominal quantity of the package,

n = the number of packages in the sample for this check,

s = the estimated standard deviation of the actual contents of the batch,

t (1-α ) = 0.995 confidence level of a Student distribution with δ = n-1 degree of freedom

4.3 if χι is the measured value for the actual contents of the i-th item in a sample containing n items, then:

The mean of the measured values for the sample is obtained by the following calculation:

4.4 and the estimated value of the standard deviation s is obtained by the following calculation:

— the sum of the squares of the measured values:

— the square of the sum of the measured values:

then

— the corrected sum

— the estimated variance:

the estimated value of the standard deviation is:

Criteria for acceptance or rejection of the batch of packages for checking the mean

4.5 Criteria for non-destructive testing:

  Criteria
Number in batchNumber in sampleAcceptanceRejection
100 to 500 (inclusive)30 ≥ Qn — 0.503s < Qn — 0.503s
> 50050 ≥ Qn — 0.379s < Qn — 0.379s

4.6 Criteria for destructive testing:

  Criteria
Number in batchNumber in sampleAcceptanceRejection
Whatever the number (≥ 100)20 ≥ Qn — 0.640s < Qn — 0.640s

4.7 For batches of fewer than 100 packages, the average of the measured values of the actual contents shall be determined by application of the formula in paragraph 4.3 where n equals the number of packages in the batch. If the average is equal to or greater than the nominal quantity of the packages in the batch, the batch shall be considered as acceptable for the purposes of the check.

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Close

See additional information alongside the content

Geographical Extent: Indicates the geographical area that this provision applies to. For further information see ‘Frequently Asked Questions’.

Show Timeline of Changes: See how this legislation has or could change over time. Turning this feature on will show extra navigation options to go to these specific points in time. Return to the latest available version by using the controls above in the What Version box.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Explanatory Memorandum

Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

Timeline of Changes

This timeline shows the different points in time where a change occurred. The dates will coincide with the earliest date on which the change (e.g an insertion, a repeal or a substitution) that was applied came into force. The first date in the timeline will usually be the earliest date when the provision came into force. In some cases the first date is 01/02/1991 (or for Northern Ireland legislation 01/01/2006). This date is our basedate. No versions before this date are available. For further information see the Editorial Practice Guide and Glossary under Help.

Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources