Search Legislation

The Public Contracts Regulations 2006

Status:

This is the original version (as it was originally made).

Electronic auctions

This section has no associated Explanatory Memorandum

21.—(1) A contracting authority which holds an electronic auction shall comply with this regulation.

(2) Subject to paragraph (3), the contracting authority may hold an electronic auction when using—

(a)the open procedure;

(b)the restricted procedure;

(c)the negotiated procedure in the circumstances referred to in regulation 13(a) and 14(1)(a)(i);

(d)the procedure set out in regulation 19(7)(b) on the re-opening of competition among the parties to a framework agreement; or

(e)the procedure set out in regulation 20 on the opening of competition for contracts to be awarded under a dynamic purchasing system.

(3) The contracting authority shall not hold an electronic auction to precede the award of a public services contract or a public works contract having as its subject matter intellectual performance, such as the design of works.

(4) The contracting authority may only hold an electronic auction to precede the award of a contract when the contract specification can be established with precision.

(5) The contracting authority shall base an electronic auction on—

(a)price alone where the contract is to be awarded on the basis of the lowest price; or

(b)price or the values of quantifiable elements of tenders indicated in the contract specification, where the contract is to be awarded on the basis of the offer which is the most economically advantageous in accordance with regulation 30(1)(a).

(6) Where the contracting authority intends to hold an electronic auction it shall state this in the contract notice.

(7) A contract specification prepared by the contracting authority in relation to a contract the award of which is to be preceded by an electronic auction shall include—

(a)the quantifiable elements of tenders capable of expression in figures or percentages which will be the subject of the electronic auction;

(b)any limitations on the values for the quantifiable elements of tenders (resulting from the contract specification) which may be submitted in the electronic auction;

(c)the information to be made available to economic operators during the electronic auction and, where appropriate, an indication of when it will be made available to them;

(d)a description of the electronic auction process;

(e)the conditions under which the economic operators will be able to bid and, in particular, the minimum differences which may be required when bidding; and

(f)all relevant information concerning—

(i)the electronic system to be used in the electronic auction; and

(ii)the arrangements for and technical specifications relevant to connection to the electronic system to be used.

(8) Before proceeding with an electronic auction, the contracting authority shall—

(a)make an initial evaluation of the tenders in accordance with the award criteria specified and with any weighting fixed for them; and

(b)by electronic means simultaneously invite all the economic operators which have submitted admissible tenders to submit new prices or new values in the electronic auction.

(9) Where the contracting authority is to award a contract on the basis of the offer which is the most economically advantageous to it in accordance with regulation 30(1)(a), each invitation referred to in paragraph (8)(b) shall include the outcome of the evaluation of the tender submitted by the economic operator to which the invitation is sent, carried out in accordance with the weighting described in regulation 30(3).

(10) The contracting authority shall include in the invitation referred to in paragraph (8)(b)—

(a)all relevant information concerning individual connection to the electronic system to be used in the electronic auction;

(b)the date and time of the start of the electronic auction;

(c)the number of phases in the electronic auction;

(d)the mathematical formula to be used in the electronic auction to determine automatic re-ranking of tenders on the basis of the new prices or new values submitted by economic operators and incorporating the weighting of all the criteria set to determine the most economically advantageous tender;

(e)where variant bids are authorised by the contracting authority, a separate mathematical formula for each variation; and

(f)the basis on which the electronic auction is to be closed and the appropriate additional information specified in paragraph (16).

(11) In relation to the formula referred to in paragraph (10)(d), any ranges used in the weighting of criteria shall be set at a specified value before the invitation is sent to economic operators.

(12) At least two working days must elapse between the date on which the invitation referred to in paragraph (8)(b) is sent and the date of the electronic auction.

(13) During each phase of an electronic auction, the contracting authority—

(a)shall instantaneously communicate to all economic operators participating in the auction at least sufficient information to enable them to ascertain their relative rankings in the auction at any time;

(b)may communicate to each economic operator other information concerning prices or values submitted by other economic operators provided that this has been stated in the contract specification; and

(c)may disclose the number of economic operators participating in that phase of the auction.

(14) During any phase of an electronic auction, the contracting authority shall not disclose the identity of any economic operator participating in the auction.

(15) The contracting authority shall close an electronic auction—

(a)at the date and time fixed for closure in the invitation referred to in paragraph (8)(b);

(b)when it receives no further new prices or new values which meet the requirements concerning minimum differences; or

(c)when the number of phases in the electronic auction specified in the invitation referred to in paragraph (8)(b) has been completed.

(16) Where the contracting authority intends to close an electronic auction—

(a)as described in paragraph (15)(b), it shall state in the invitation referred to in paragraph (8)(b) the period which it intends to allow to elapse before it closes the auction after receiving a submission from an economic operator participating in the auction; or

(b)as described in paragraph (15)(c), it shall state in the invitation referred to in paragraph (8)(b) the timetable for each phase in the auction.

(17) After closing an electronic auction the contracting authority shall award the contract in accordance with regulation 30 on the basis of the results of the electronic auction.

(18) The contracting authority shall not use an electronic auction improperly or in such a way as to prevent, restrict or distort competition or to change the subject matter of the contract as referred to in the contract notice and defined in the specification.

(19) The references to values in paragraphs (5)(b), (8)(b), (10)(d), (13)(b) and (15)(b) shall be interpreted as including price.

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

Explanatory Memorandum

Explanatory Memorandum sets out a brief statement of the purpose of a Statutory Instrument and provides information about its policy objective and policy implications. They aim to make the Statutory Instrument accessible to readers who are not legally qualified and accompany any Statutory Instrument or Draft Statutory Instrument laid before Parliament from June 2004 onwards.

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources