Search Legislation

The Fishing Vessels (Safety of 15–24 Metre Vessels) Regulations 2002

What Version

 Help about what version
  • Latest available (Revised)
  • Original (As made)

Status:

This is the original version (as it was originally made). UK Statutory Instruments are not carried in their revised form on this site.

Amendment of the Fishing Vessels (Safety Provisions) Rules 1975

1.  The Fishing Vessels (Safety Provisions) Rules 1975 shall be amended as follows.

2.  Subject to the following paragraphs, in each Rule the words “of 12 metres in length and over”, wherever they appear, shall be omitted.

3.  In Rule 1(2)—

(a)in sub-paragraph (a), for “Rule 1A” there shall be substituted “Rules 1A and 1B”, and “other than fishing vessels of less than 12 metres in length” shall be omitted,

(b)for sub-paragraph (b) there shall be substituted—

(b)Where a heading of a Rule refers to additional requirements, that Rule shall come into force on 23rd November 2002 for fishing vessels constructed before 23rd November 1995 only in so far as their structural characteristics permit., and

(c)in sub-paragraph (c), at the end of paragraph (i) the word “and” and paragraph (ii) shall be omitted.

4.  In Rule 1(5), in the definition of “Machinery space”—

(a)the words “in relation to vessels of 24.4 metres in length and over” shall be omitted, and

(b)the words “and in relation to vessels of less than 24.4 metres in length, means the main engine room” shall be omitted.

5.  After Rule 1A there shall be inserted—

1B United Kingdom vessels of less than 15 metres length overall, or of at least 15 metres length overall but less than 24 metres registered length

These Rules do not apply to fishing vessels to which either of the following apply—

(a)the Fishing Vessels (Code of Practice for the Safety of Small Fishing Vessels) Regulations 2001(1);

(b)the Fishing Vessels (Safety of 15–24 Metre Vessels) Regulations 2002(2).

6.  In Rule 5—

(a)paragraphs (2) and (3)(a)(i) shall be omitted, and

(b)in paragraph (3)(a), the words “of lengths more than 24.4 metres but” shall be omitted.

7.  In Rule 8, the words “and provided further that” to the end shall be omitted.

8.  For the heading to Rule 16A, there shall be substituted “Additional requirements relating to stability”.

9.  For the heading to Rule 20A, there shall be substituted “Additional requirements relating to control position”.

10.  In Rules 25, 27 and 30—

(a)in the heading to each Rule, the words “—vessels of 24.4 metres in length and over” shall be omitted, and

(b)in paragraph (1) of each Rule, the words “of 24.4 metres in length and over” shall be omitted.

11.  Rules 26, 28, 31, 37, 42, 42A, 43(6), 46, 54B, 67, 69, 71, 79, 80, 104, 105 and 120 shall be omitted.

12.  In Rule 34—

(a)in paragraph (3), the words “of 24.4 metres in length and over,” shall be omitted,

(b)paragraph (9) shall be omitted, and

(c)in paragraph (10), for the words “vessels of 12 metres in length and over to which these Rules apply” there shall be substituted “every such vessel”.

13.  In Rule 36—

(a)for the heading there shall be substituted “Bilge pumping requirements”, and

(b)in paragraph (1), the words “of 24.4 metres in length and over” shall be omitted.

14.  In Rule 41—

(a)for the heading there shall be substituted “Electrical installations”,

(b)in paragraph (1), the words “of 24.4 metres in length and over” shall be omitted, and

(c)in paragraph (9), the words “24.4 metres in length and over but” shall be omitted.

15.  For the heading to Rule 41A, there shall be substituted “Additional requirements relating to electrical swichboards”.

16.  In Rule 45—

(a)in the heading, the words “of 24.4 metres in length and over” shall be omitted, and

(b)in paragraph (1), the words “of 24.4 metres in length and over” shall be omitted.

17.  In Rule 49—

(a)in the heading, the words “—vessels of 24.4 metres in length and over” shall be omitted, and

(b)the words “of 24.4 metres in length and over” shall be omitted.

18.  In Rule 51, in the sub-heading to paragraph (3) the words “for vessels of 15 metres in length or over” shall be omitted.

19.  For the heading to Rule 54A, there shall be substituted “Additional requirements relating to equipment used in hoisting”.

20.  In Rule 56—

(a)in paragraph (4), the words “in vessels of 24.4 metres in length and over” shall be omitted,

(b)in paragraph (5), the last sentence shall be omitted,

(c)in paragraphs (9) and (20), for “every vessel of 24.4 metres in length and over to which these Rules apply” there shall be substituted “every such vessel”, and

(d)in paragraph (10), for “every vessel of 12 metres in length and over to which these Rules apply” there shall be substituted “every such vessel”.

21.  In Rules 57(11) and 58(10), for “every vessel of 24.4 metres in length and over to which these Regulations apply” there shall be substituted “every such vessel”.

22.  In Rule 60—

(a)sub-paragraph (a) of paragraph (2) shall be omitted, and

(b)in paragraph (5), the words “of 12 metres in length and over to which these Regulations apply” shall be omitted.

23.  For the heading to Rule 60A, there shall be substituted “Additional requirements relating to emergency routes and exits”.

24.  In Rule 62, the words “and in other vessels of 24.4 metres in length and over” shall be omitted.

25.  For the heading to Rule 63A, there shall be substituted “Additional requirements relating to traffic routes”.

26.  For the heading to Rule 65A, there shall be substituted “Additional requirements relating to spaces accessible to workers, work or handling areas, and accommodation ladders etc”.

27.  In Rule 65B—

(a)at the beginning there shall be inserted the heading “Personal protective equipment”, and

(b)in paragraph (1), for “protection” there shall be substituted “protective”.

28.  For the heading in Rule 72A, there shall be substituted “Additional requirements relating to electronic aids to navigation”.

29.  In Rules 78 and 103, in the heading and in paragraph (1), the words “24.4 metres in length and over but” shall be omitted.

30.  In Rule 87—

(a)in paragraph (1), the words “of 17 metres in length and over” shall be omitted,

(b)paragraph (2) shall be omitted, and

(c)in paragraph (3), for “every vessel to which these Rules apply” there shall be substituted “every such vessel”.

31.  For the heading to Rule 106A, there shall be substituted “Additional requirements relating to signs for manually-operated fire-fighting equipment”.

32.  In Rule 111(4), the words “of 24.4 metres in length and over” shall be omitted.

33.  In Rule 121—

(a)in paragraph (1), the words “of 24.4 metres in length and over” shall be omitted, and

(b)paragraph (2) shall be omitted.

34.  In Rule 124, the words “76(3)(a), 77(5)(a),” and “79(b)” shall be omitted.

35.  In Rule 125A, for “Rules 78(3)(a) and 79(b)” there shall be substituted “Rule 78(3)(a)”.

36.  In Rule 126B, the words “for fishing vessels of 24 metres in length and over”, where they first appear, shall be omitted.

(1)

S.I. 2001/9, as amended by S.I. 2002/ ... ... ... ...

(2)

S.I. 2002/ ... ... ... ...

Back to top

Options/Help

Print Options

Close

Legislation is available in different versions:

Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.

Original (As Enacted or Made):The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.

Close

Opening Options

Different options to open legislation in order to view more content on screen at once

Close

More Resources

Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as enacted version that was used for the print copy
  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • correction slips
  • links to related legislation and further information resources
Close

More Resources

Use this menu to access essential accompanying documents and information for this legislation item. Dependent on the legislation item being viewed this may include:

  • the original print PDF of the as made version that was used for the print copy
  • correction slips

Click 'View More' or select 'More Resources' tab for additional information including:

  • lists of changes made by and/or affecting this legislation item
  • confers power and blanket amendment details
  • all formats of all associated documents
  • links to related legislation and further information resources