- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made). This item of legislation is currently only available in its original format.
4. A notified body chosen by the installer of the lift shall carry out or have carried out the final inspection of the lift about to be placed on the market. The appropriate tests and checks defined by the applicable standard(s) referred to in Article 5, or equivalent tests, must be carried out in order to ensure conformity of the lift with the relevant requirements of the Directive.
These checks and tests shall cover in particular:
(a)examination of the documentation to check that the lift conforms with the representative model of the lift approved in accordance with Annex V.B;
(b)operation of the lift both empty and at maximum load to ensure correct installation and operation of the safety devices (end stops, locking devices, etc.),
operation of the lift at both maximum load and empty to ensure the correct functioning of the safety devices in the event of loss of power,
static test with a load equal to 1.25 times the nominal load.
The nominal load shall be that referred to in Annex I, Section 5.
After these tests, the notified body shall check that no distortion or deterioration which could impair the use of the lift has occurred.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include: