- Latest available (Revised)
- Original (As made)
This is the original version (as it was originally made). This item of legislation is currently only available in its original format.
A. The EC declaration of conformity must contain the following information:
name and address of the manufacturer of the safety components(3),
where appropriate, name and address of his authorised representative established in the Community (3),
description of the safety component, details of type or series and serial number (if any),
safety function of the safety component, if not obvious from the description,
year of manufacture of the safety component,
all relevant provisions with which the safety component complies,
where appropriate, reference to harmonized standards used,
where appropriate, name, address and identification number of the notified body which carried out the EC type-examination in accordance with Article 8(1)(a)(i) and (ii),
where appropriate, reference to the EC type-examination certificate issued by that notified body,
where appropriate, name, address and identification number of the notified body which carried out the production checks in accordance with Article 8(1)(a)(ii),
where appropriate, name, address and identification number of the notified body which checked the system of quality assurance implemented by the manufacturer in accordance with Article 8 (1) (a) (iii),
identification of the signatory empowered to act on behalf of the manufacturer of the safety components or his authorised representative established in the Community.
The provisions of Article 8(1)(a)(i), (ii) and (iii) are respectively set out in regulation 13(3)(a), (b) and (c) and the provisions of Article 8(2)(i), (ii), (iii), (iv) and (v) are respectively set out in regulation 13(2)(a), (b), (c), (d) and (e).
The declaration must be drafted in the same language as the instruction manual referred to in Annex 1, Section 6.1, and be either typewritten or printed.
Business name, full address; in the case of an authorised representative, also indicate the business name and address of the manufacturer of the safety component.
Latest Available (revised):The latest available updated version of the legislation incorporating changes made by subsequent legislation and applied by our editorial team. Changes we have not yet applied to the text, can be found in the ‘Changes to Legislation’ area.
Original (As Enacted or Made): The original version of the legislation as it stood when it was enacted or made. No changes have been applied to the text.
Access essential accompanying documents and information for this legislation item from this tab. Dependent on the legislation item being viewed this may include: