The Packaging, Labelling and Carriage of Radioactive Material by Rail Regulations 1996

Saving and transitional provision for designs approved under earlier international regulations or under previous regulations

9.—(1) Subject to the following provisions of this regulation, notwithstanding the provisions of regulations 6 to 8 of these Regulations or regulation 32 of the Carriage of Dangerous Goods by Rail Regulations 1996(1), any packaging, the construction of which was commenced before these Regulations came into force and which is manufactured to a design approved by a competent authority under the Regulations for the Safe Transport of Radioactive Material 1973 Edition(2), the 1973 (as amended) Edition(3) of those Regulations or the Carriage of Dangerous Goods by Rail Regulations 1994(4) may continue to be used for the carriage of radioactive material.

(2) The use of any packaging falling within paragraph (1) shall require multilateral approval.

(3) Before use, any packaging falling within paragraph (1) shall be legibly and durably marked with a serial number assigned in accordance with paragraph 9 of Schedule 13.

(4) Paragraph (1) shall not apply where changes which have been made in the design of the packaging or in the nature or quantity of the authorised radioactive contents are likely to affect safety.

(1)

S.I. 1996/            .

(2)

Published by the International Atomic Energy Agency, Vienna 1973, Safety Series No. 6 (STI/PUB 323).

(3)

Published by the International Atomic Energy Agency, Vienna 1979, Safety Series No. 6 (ISBN 92—0—623179—0).

(4)

S.I. 1994/670.